Geochemical and hydrodynamic constraints on the distribution of trace metal concentrations in the lagoon of Nouméa, New Caledonia

Seawater samples were collected in the lagoon of Nouméa (southwest New Caledonia) along two transects from eutrophic coastal bays to the oligotrophic barrier reef. Land-based emissions to the lagoon were measured with dissolved and particulate concentrations of chromium (Cr) and nickel (Ni), used as tracers of both terrigenous and industrial (Ni ore treatment) activities, as well as dissolved and particulate concentrations of zinc (Zn), used as a tracer of urban effluents. The spatial variability of metal concentrations was related to geochemical and hydrodynamic conditions, i.e., respectively: (1) natural and anthropogenic emission sources, and chemical processes occurring in the water column; and (2) water residence times. The parameter used to describe the residence time of water masses was the local e-flushing time, i.e. the time required for a tracer mass contained within a given station to be reduced by a factor 1/e. High metal concentrations were found in coastal areas (up to 9000 ng dissolved Ni L⁻¹), and steeply decreased with distance from the coast (down to 101 ng dissolved Ni L⁻¹ near the barrier reef) to reach levels similar to those found in remote Pacific waters, suggesting a rapid renewal of waters close to the barrier. Distributions of metals in the lagoon are controlled upstream by land-based emission sources and later chemical processes. Then hydrodynamics constrain metal distributions, as shown by the observed relationship between local e-flushing times and the spatial variability of metal concentrations. In addition, a change in the direction of prevailing winds yielded a decrease of dissolved metal concentrations at the same site by a factor of 2.5 (Cr and Ni) and 2.9 (Zn). It is suggested that the residence time is a key parameter in the control of elemental concentrations in the lagoon waters, as much as land-based emission sources.     

Distributions of dissolved and particulate biogenic thiols in the subartic Pacific Ocean

Dissolved and particulate concentrations of the biogenic thiols cysteine (Cys), arginine–cysteine (Arg–Cys), glutamine–cysteine (Gln–Cys), γ-glutamate–cysteine (γ-Glu–Cys) and glutathione (GSH) were measured in the subartic Pacific Ocean in the summer of 2003 using high performance liquid chromatography (HPLC) with precolumn derivatization as reported in previous work. In this study, a preconcentration protocol for the derivatized thiols was utilized to extend detection limits of dissolved thiols to picomolar levels. The measured concentrations of particulate and dissolved thiols were uncoupled, with distinctive depth profiles and large differences in the particulate to dissolved ratios between individual compounds. Glutathione was the most abundant particulate thiol whereas the most abundant dissolved thiol was γ-Glu–Cys, with concentrations as high as 15 nM. Given the relatively small pool of intracellular γ-Glu–Cys and the very low dissolved concentrations of GSH, we hypothesize that glutathione released from cells is rapidly converted to the potentially degradation resistant γ-Glu–Cys outside the cell. The relatively high concentrations of other dissolved thiols compared to particulate concentrations implies both biological exudation and slow degradation rates. Some thiols appear to vary with changes in nutrient availability but this effect is difficult to decouple from changes in community structure inferred from pigment analyses. Dissolved thiol concentrations also exceed typical metal concentrations in the subartic Pacific, supporting previous arguments that they may be important in metal speciation.     

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at     

Quality Assessment of Cartographic Generalisation

This paper proposes a methodology to assess the quality of cartographic generalisa‐tion, which consists of representing geographic space in a simplified way according to the scale and the objectives of the intended map. The automation of this process makes the derivation of data easier, but the quality of the results is often not evaluated. This paper proposes an assessment model based on: (1) characterisation of the data in their initial and final states at different levels of analysis; (2) a data quality assessment by comparison of the two characterisations; and (3) aggregation of the various assessment results to summarise data quality. The assessment algorithm has been implemented and the method has been tested to assess the generalisation of a small urban area. A visualisation tool for assessment of the results has been developed to validate the generalisation evaluation. The results of the research are presented and discussed at the end of the paper.     

Micro- and nano-textural evidence of Ti(–Ca–Fe) mobility during fluid–rock interactions in carbonaceous lawsonite-bearing rocks from New Zealand

Understanding the mobility of chemical elements during fluid–rock interactions is critical to assess the geochemical evolution of a rock undergoing burial and metamorphism and, more generally, to constrain the geochemical budget of the subduction factory. In particular, determining the behavior and mobility of Ti in aqueous fluids constitutes a great challenge that is still under scrutiny. Here, we study plant fossils preserved in blueschist metasedimentary rocks from the Marybank Formation (New Zealand). Using scanning and transmission electron microscopies (SEM and TEM), we show that the carbonaceous material (CM) composing the fossils contains abundant nano-inclusions of Ti- and Fe-oxides. These nanocrystals are mainly anatase, rutile, and Fe–Ti oxides. The mineral composition observed within the fossils is significantly different from that detected in the surrounding rock matrix. We propose that Ti and Fe might have been mobilized by the alteration of a detrital Ti–Fe-rich protolith during an early diagenetic event under acidic and reducing conditions. Aqueous fluids rich in organic ligands released by the degradation of organic matter may have been involved. Moreover, using mass balance and petrological observations, we show that the contrasted mineralogy between the rock matrix and the fossil CM might be the consequence of the chemical isolation of fossil CM during the prograde path of the rock. Such an isolation results from the early formation of quartz and Fe-rich phyllosilicate layers enclosing the fossil as characterized by SEM and TEM investigations. Overall, this study shows that investigating minerals associated with CM down to the nanometer scale in metamorphic rocks can provide a precious record of early prograde geochemical conditions.     

Study of the moist Convective Boundary Layer structure by backscattering lidar

Measurements of the structure of the Convective Boundary Layer (CBL) were made from the ground and from the ARAT aircraft with a backscattering lidar during the preliminary phase of the French project LEANDRE. A numerical model of Mie theory diffusion was used to determine a theoretical profile of the extinction coefficient, as a function of relative humidity. Comparisons between theoretical and measured profiles were made. Good agreement was found, which confirms that the variation of the extinction coefficient in the CBL is primarily controlled by the relative humidity. This paper also presents a detailed analysis of the small-scale structure of the CBL. The normalized length and number of thermals are estimated. Results are in agreement with previousin-situ measurements. An analysis of the bidimensional cross-section of the extinction coefficient shows that this coefficient permits one to retrieve more quantitative information than the range-corrected signal, as the fractions of entrained air and surface-layer air at a given altitude.     

Momentum and heat transfers in the surface layer over a frozen sea

Wind and temperature profiles from a 10-m mast were measured over the frozen Baltic Sea. The Monin-Obukhov similarity theory applies well to runs carefully selected according to stationarity criteria. This provides relatively low-scattered results with the roughness length z ₀ 0.04 cm, the drag coefficient C _D 1.5 × 10^-3 and the Stanton number C _H 1.00 × 10^-3 under near-neutral conditions. The roughness length, however, behaves in a peculiar way under intense stratification conditions. The reasons proposed for this could lead to an extension of the theory. The mechanisms for momentum and heat transfers are also examined, revealing that there are two different regimes, the smooth and the rough, for the wall friction but not for the heat transfer. Further, the scatter of the data for momentum and heat transfer under the aerodynamically rough regime can be explained by the distinction between the type of thermal stability conditions.     

Two-dimensional modeling of fine sediment transport with mixed sediment and consolidation: Application to the Gironde Estuary,France

In order to optimize ship navigation in the macrotidal Gironde Estuary, a recent project funded by the port of Bordeaux aims at better understand and forecast hydrodynamic and fine sediment transport within the estuary. In the framework of this project, a two-dimensional hydro-sedimentary model is built. The model includes hydrodynamic forcings, mixed-sediment transport, and consolidation processes. The harmonic analysis of the astronomical tides reveals a strong distortion of the tidal wave inducing the growth of overtide constituents and the non-significant effect of tide-surge interactions in annual-scale prediction. Depending on hydrological conditions, river discharge can considerably alter the model accuracy due to the migration of the turbidity maximum zone modifying the bottom roughness. Comparison with measurements shows the ability of the model to reproduce suspended-sediment concentrations in the central Estuary. Sensitivity of the model to sediment features has also been discussed in regard of suspended-sediment concentrations and fluid mud deposits. The model will be further coupled with ship squat predictions and a morphodynamic model.