Chemical abundances determined from meteor spectra: I. Ratios of the main chemical elements

Abstract— Relative chemical abundances of 13 meteoroids were determined by averaging the composition of the radiating gas along the fireball path that originated during their penetration into the Earth's atmosphere. Mg, Fe, Ni, Cr, Mn, and Co abundances, relative to Si, are similar to those reported for CI and CM carbonaceous chondrites and interplanetary dust particles. In contrast, relative abundances of Ca and Ti in meteor spectra indicate that these elements suffer incomplete evaporation processes. The chemical composition of all meteoroids studied in this work differs from that of 1P/Halley dust.     

Coupled hydrogeological and reactive transport modelling of the Simpevarp area (Sweden)

The Simpevarp area is one of the alternative sites being considered for the deep geological disposal of high level radioactive waste in Sweden. In this paper, a coupled regional groundwater flow and reactive solute transport model of the Simpevarp area is presented that integrates current hydrogeological and hydrochemical data of the area. The model simulates the current hydrochemical pattern of the groundwater system in the area. To that aim, a conceptual hydrochemical model was developed in order to represent the dominant chemical processes. Groundwater flow conditions were reproduced by taking into account fluid-density-dependent groundwater flow and regional hydrogeologic boundary conditions. Reactive solute transport calculations were performed on the basis of the velocity field so obtained. The model was calibrated and sensitivity analyses were carried out in order to investigate the effects of heterogeneities of hydraulic conductivity in the subsurface medium. Results provided by the reactive transport model are in good agreement with much of the measured hydrochemical data. This paper emphasizes the appropriateness of the use of reactive solute transport models when water-rock interaction reactions are involved, and demonstrates what powerful tools they are for the interpretation of hydrogeological and hydrochemical data from site geological repository characterization programs, by providing a qualitative framework for data analysis and testing of conceptual assumptions in a process-oriented approach.     

钾霞石制备体系碱性滤液的利用技术

为处理钾长石水热制备钾霞石所产生的碱性滤液,本文采用水热法,考察了氢氧化铝溶解时间、晶化时间、晶化温度、水碱比对钾霞石产率和白度的影响,并对合成钾霞石物相进行了表征。结果表明,合成钾霞石的最佳条件为,氢氧化铝溶解时间为1.5 h,晶化时间为4 h,晶化温度280℃,水碱比为1.8。XRD结果表明,产物为钾霞石粉体。傅里叶变换红外光谱表明,Al(OH)₃中的Al在水热条件下进入到Si—O骨架中形成了Si—O—Al官能团,从而印证了钾霞石的合成。差热分析结果表明,合成钾霞石具有良好的热稳定性。氮气吸附结果表明,合成钾霞石比表面积为5.18 m²/g,平均孔径为32.98 nm。实现了钾长石水热制备钾霞石所剩碱性滤液的资源化利用,并为钾长石水热制备钾霞石提供了一种母液循环的思路,使水热制备钾霞石工业化成为一种可能。     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

Habitat, occurrence and conservation of Saharo-Arabian-Turanian element Forsskaolea tenacissima L. in the Iberian Peninsula

The aim of this study is to assess the Iberian populations of Forsskaolea tenacissima L. according to its biogeographical interest, habitat, geographical range and conservation status. Results point out that they are restricted to gravel wadis of Tabernas Desert (SE Spain), are scarcely included in protected areas and represent historically isolated populations with relict behaviour. We also describe a new association, Senecioni-Forsskaoleetum tenacissimae. Conservation status of species is cause for concern and two conservation actions must be carried out. Firstly, protected areas should house Forsskaolea populations and secondly, phytosociological characterization of a community allows inventorying its habitat and directing conservation efforts to community level.     

An experimental study of nominally symmetric and asymmetric structures isolated with the FPS

This experimental investigation deals with the earthquake behaviour of a nominally symmetric and a mass‐asymmetric three‐storey structural model isolated with the frictional pendulum system (FPS). Both accidental and natural torsion are evaluated in the structure by using recorded accelerations in all building floors and measured deformations at the isolation level. A 3D‐shaking table was used to subject the model to five different ground motions, including impulsive as well as far‐field subduction‐zone type earthquakes. Results show that the analytical predictions of the earthquake behaviour of the isolated structure, as obtained from a physical model of the FPS, are in close agreement with the true complex inelastic measured behaviour of the FPS. Besides, experimental results also validate previous observations about the importance of accounting for the variability of the normal loads in modelling the earthquake behaviour of FPS isolators. Measured torsional deformation amplifications at the base of the building vary, in the mean, from 2.5% to 6% for the symmetric and asymmetric structural configurations, respectively. In relation to the fixed base structure, the reduction factors for the base shear of the isolated structure are, in the mean, about 3.9 for both configurations. Finally, it is concluded that the FPS is capable of controlling the lateral–torsional motions of mass‐asymmetric structures quite effectively by aligning the centre of mass of the superstructure with the centre of pendular and frictional resistance of the isolation system. Copyright © 2003 John Wiley & Sons, Ltd.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

辽宁水泉金矿综合信息找矿模型及预测

通过对辽宁水泉金矿的基础地质研究和综合找矿信息分析，并根据该矿区资源危机，缺乏后备金矿储备的实际情况建立了水泉金矿综合信息找矿模型。对远景成矿靶区进行了初步圈定，为详细地质勘查、扩大金矿资源提供了依据。     

Crustal and mantle strengths in continental lithosphere: is the jelly sandwich model obsolete?

The relative importance of the contribution of the lower crust and of the lithospheric mantle to the total strength of the continental lithosphere is assessed systematically for realistic ranges of layer thickness, composition, and temperature. Results are presented as relative strength maps, giving the ratio of the lower crust to upper mantle contribution in terms of crustal thickness and surface heat flow. The lithosphere shows a “jelly sandwich” rheological layering for low surface heat flow, thin to average crustal thickness, and felsic or wet mafic lower crustal compositions. On the other hand, most of the total strength resides in the seismogenic crust in regions of high surface heat flow, crust of any thickness, and dry mafic lower crustal composition.