Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Fast genetic mapping in barley: case studies of cuticle mutants using RNA-sequencing

Barley(Hordeum vulgare L.) is one of the earliest domesticated crop species and ranked as the fourth largest cereal production worldwide. Forward genetic studies in barley have greatly advanced plant genetics during the last century; however, most genes are identified by the conventional mapping method. Array genotyping and exome-capture sequencing have also been successfully used to target the causal mutation in barley populations, but these techniques are not widely adopted because of associated costs and partly due to the huge genome size of barley. This review summarizes three mapping cases of barley cuticle mutants in our laboratory with the help of RNA-sequencing. The causal mutations have been successfully identified for two of them and the target genes are located in the pericentromeric regions. Detailed information on the mapping-by-sequencing, mapping-and-sequencing, and RNA-sequencing assisted linkage mapping are presented and some limitations and challenges on the mapping assisted by RNA sequencing are also discussed. The alternative and elegant methods presented in this review may greatly accelerate forward genetics of barley mapping, especially for laboratories without large funding.     

Microwave Type III Burst Group in the 1993 October 2 Flare

Microwave Type III bursts with positive frequency drifting rate were found by Stahli and Benz (1987) for first time. Type III events are especially interesting because they are well-known to be signatures of electron beams in coronal plasma, and they are effective means for diagnosting of source plasma. A microwave burst consisting of some microwave type III burst groups was registered at Beijing Astronomical Observatory with the 2545–2645–2840 MHz synchronous observing system. The distributions of frequency drifting rate, half power duration, and intensity for each impulse in the groups have been statistically analysed. From this analysis, some important parameters for the dynamic process in the flare are deduced and discussed.     

SDSS J143030.22-001115.1： A Misclassified Narrow-line Seyfert 1 Galaxy with Flat X-ray Spectrum

We used multi-component profiles to model the Hβ and [OⅢ]λλ4959,5007 lines of SDSS J143030.22-001115.1, a narrow-line Seyfert 1 galaxy (NLS1) in a sample of 150 NLS1 candidates selected from the Sloan Digital Sky Survey (SDSS), Early Data Release (EDR). After subtracting the Hβ contribution from narrow line regions (NLRs), we found that its full width half maximum (FWHM) of broad Hβ line is nearly 2900km s~(-1) , significantly larger than the customarily adopted criterion of 2000 km s~(-1) . With its weak Fe Ⅱ multiples, we believe that SDSS J143030.22-001115.1 should not be classified as a genuine NLS1. When we calculate the virial black hole masses of NLS1s, we should use the Hβ linewidth after subtracting the NLR component.     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.     

A New Solar Radio Spectrometer at 1.10-2.06 GHz and First Observational Results

An improved Solar Radio Spectrometer working at 1.10-2.06 GHz with much improved spectral and temporal resolution, has been accomplished by the National Astronomical Observatories and Hebei Semiconductor Research Institute, based on an old spectrometer at 1-2 GHz. The new spectrometer has a spectral resolution of 4 MHz and a temporal resolution of 5ms, with an instantaneous detectable range from 0.02 to 10 times of the quiet Sun flux. It can measure both left and right circular polarization with an accuracy of 10% in degree of polarization. Some results of preliminary observations that could not be recorded by the old spectrometer at 1-2 GHz are presented.     

Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

试论质量体系有效性的保持

提出了保持质量体系有效运行的前提和基础 ,关键和保证措施 ,并指出了组织企业保持质量体系持续有效的方法和途径。     

Theory of stability, and regulation and control of ecological system in oasis

Starting with analysis on the evolving course of oasis and the characteristics and evolution of transitional zone between oasis and desert, in consideration of ecological elements including plant stomata resistance, area covered by vegetation, and physical elements including albedo of vegetation and bare soil, atmosphere temperature, and humidity, under the condition of the balance among net radiation flux, latent heat flux, and sensible heat flux, the following are calculated: temperatures of vegetation and bare soil in different conditions, as well as the evapotranspiration rate of ecosystem. Analysis on evapotranspiration rate indicates that it depends on both the climate of environment and the physiological and ecological conditions of plants. On certain conditions, the evapotranspiration rate of transitional zone between oasis and desert (i.e. area covered by vegetation less than 20%), in some parameter domains, appears in bifurcation or multiequilibrium state. Meanwhile, in such area, ecosystem is extremely unstable. Any minor change to the balance will cause either increase or reduction of area covered by vegetation in ecosystem, on the basis of discussion on the emergency of these phenomena. This paper is attempting to propose an effective way of destruction and rebuilt ecosystem in transitional zone. The way is to control the evaporation of plant through selecting anti-drought country plant with big stomata resistance, and modify the roughness of the underlying surface in ecosystem by establishing rational interspace structure of plant community, so as to put the degenerative ecosystem into the natural succession track. This primary theory is being verified through observation and analysis on historical data.