Carbon isotopes and petrography of kerogens in ∼3.5-Ga hydrothermal silica dikes in the North Pole area, Western Australia

More than 600 specimens of ∼3.5 Ga-old hydrothermal silica dikes from the North Pole area, Pilbara craton, Western Australia, have been studied petrographically. The kerogens in 44 samples have been analyzed isotopically (C and N) and chemically (C, N, and H). The silica dikes are composed mainly of fine-grained silica (modal abundance: >97%) and are classified into two types by minor mineral assemblages: B(black)-type and G(gray)-type. The B-type silica dikes contain kerogen (0.37 to 6.72 mgC/g; average 2.44 mgC/g, n = 21) and disseminated sulfides, dominantly pyrite and Fe-poor sphalerite. In some cases, carbonate and apatite are also present. Their silica-dominated and sulfide-poor mineral assemblages suggest precipitation from low-temperature reducing hydrothermal fluid (likely 100-200°C). On the other hand, the G-type silica dikes are sulfide-free and concentrations of kerogen are relatively low (0.05 to 0.41 mgC/g; average 0.17 mgC/g, n = 13). They typically contain Fe-oxide (mainly hematite) which commonly replaces cubic pyrite and rhombic carbonate. Some G-types occur along secondary quartz veins. These textures indicate that the G-type silica dikes were formed by postdepositional metasomatism (oxidation) of the B-types, and that the B-types probably possess premetasomatic signatures. The δ¹³C values of kerogen in the B-types are −38.1 to −33.1‰ (average −35.9‰, n = 21), which are ∼4‰ lower than those of the G-types (−34.5 to −30.0‰; average −32.2‰, n = 19), and ∼6‰ lower than bedded chert (−31.2 to −29.4‰; average −30.5‰, n = 4). This indicates the preferential loss of ¹²C during the metasomatism (estimated fractionation factor: 0.9985). Considering the metasomatic effect on carbon isotopes with probably minor diagenetic and metamorphic overprints, we conclude that the original δ¹³C values of the kerogen in the silica dikes would have been heterogeneous (∼5‰) and at least some material had initial δ¹³C values of ≤ −38‰. The inferred ¹³C-depletions of organic carbon could have been produced by anaerobic chemoautotrophs such as methanogen, but not by aerobic photoautotrophs. This is consistent with the estimated physical and chemical condition of the hydrothermal fluid, which was probably habitable for anaerobic and thermophilic/hyperthermophilic chemoautotrophs. Alternatively, the organic matter may have been possibly produced by abiological reaction such as Fischer-Tropsch Type (FTT) synthesis under the hydrothermal condition. However, the estimated condition is inconsistent with the presence of the effective catalysts for the FTT reaction (i.e., Fe-Ni alloy, magnetite, and hematite). These lines of evidence suggest the possible existence of biosphere in the ∼3.5 Ga sub-seafloor hydrothermal system.     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.     

A computational procedure for joining separate map sheets

Map sheets have been often used as a basic spatial unit for managing spatial data produced from paper maps. This often results in incompatibility between adjacent map sheets, because spatial objects do not cross the boundaries smoothly and even the boundaries themselves do not match their neighbors exactly. To solve the problem this paper proposes a computational procedure for joining separate map sheets to obtain seamless spatial data. Line objects digitized separately in different map sheets are considered, which are frequently used to represent road networks, gas pipelines, and boundaries of polygon objects. The procedure consists of three steps: (1) extraction of end nodes, (2) detection of matching nodes, and (3) transformation of the map sheet. Each step goes interactively so that unexpected errors can be avoided by human observation. To test the validity of the procedure, map sheets are combined containing the road network data of Tokyo 23-ku area, Japan. This revised version was published online in July 2006 with corrections to the Cover Date.     

Illawarra Reversal: The fingerprint of a superplume that triggered Pangean breakup and the end-Guadalupian (Permian) mass extinction

The Permian magnetostratigraphic record demonstrates that a remarkable change in geomagnetism occurred in the Late Guadalupian (Middle Permian; ca. 265 Ma) from the long-term stable Kiaman Reverse Superchron (throughout the Late Carboniferous and Early-Middle Permian) to the Permian–Triassic Mixed Superchron with frequent polarity changes (in the Late Permian and Triassic). This unique episode called the Illawarra Reversal probably reflects a significant change in the geodynamo in the outer core of the planet after a 50 million years of stable geomagnetism. The Illawarra Reversal was likely led by the appearance of a thermal instability at the 2900 km-deep core–mantle boundary in connection with mantle superplume activity. The Illawarra Reversal and the Guadalupian–Lopingian boundary event record the significant transition processes from the Paleozoic to Mesozoic–Modern world. One of the major global environmental changes in the Phanerozoic occurred almost simultaneously in the latest Guadalupian, as recorded in 1) mass extinction, 2) ocean redox change, 3) sharp isotopic excursions (C and Sr), 4) sea-level drop, and 5) plume-related volcanism. In addition to the claimed possible links between the above-listed environmental changes and mantle superplume activity, I propose here an extra explanation that a change in the core's geodynamo may have played an important role in determining the course of the Earth's surface climate and biotic extinction/evolution. When a superplume is launched from the core–mantle boundary, the resultant thermal instability makes the geodynamo's dipole of the outer core unstable, and lowers the geomagnetic intensity. Being modulated by the geo- and heliomagnetism, the galactic cosmic ray flux into the Earth's atmosphere changes with time. The more cosmic rays penetrate through the atmosphere, the more clouds develop to increase the albedo, thus enhancing cooling of the Earth's surface. The Illawarra Reversal, the Kamura cooling event, and other unique geologic phenomena in the Late Guadalupian are all concordantly explained as consequences of the superplume activity that initially triggered the breakup of Pangea. The secular change in cosmic radiation may explain not only the extinction-related global climatic changes in the end-Guadalupian but also the long-term global warming/cooling trend in Earth's history in terms of cloud coverage over the planet.     

Reproductive biology and seasonality of the Indo-Australasian mysid Mesopodopsis orientalis (Crustacea: Mysida) in a tropical mangrove estuary,Malaysia

A year-round survey of the tropical shallow-water mysid Mesopodopsis orientalis (Tattersall, 1908) (Crustacea, Mysidacea) was conducted in the Merbok mangrove estuary, northwestern Peninsular Malaysia. The mysid formed dense aggregations at the river's edge close to the mangrove forest during the daytime, but very few were captured elsewhere in the estuary system. The sampled population was found in a wide range of salinities from 16 to 32, demonstrating broad euryhalinity, and the number of the catch at the littoral zone ranged from 11.8 to 2273 ind m⁻². The overall annual mean was 709.2 ind m⁻². Females predominated over males in the entire population, and brooding females were present at every monthly sample, indicating that reproduction is continuous year round. The clutch size positively correlated with female body length. The diameter of eggs (Stage I embryos) was unaffected by the seasonality and independent of the maternal size within an observed size range. The life history pattern of the estuarine population of M. orientalis showed close similarity to that of the coastal counterpart. However, the former was found to produce fewer but larger eggs, and the specimens in this population were larger than those in the coastal population at the embryo, juvenile, and adult stages. This evidence indicates that the life history features of the estuarine population would differ to some degree from those of the coastal counterpart.     

Predictability of Interannual Variability in the Kuroshio Transport South of Japan Based on Wind Stress Data over the North Pacific

It is expected that a roughly two-year forecast of the Kuroshio transport variation can be made from a past record of wind stress data over the ocean, since it takes nearly ten years for the first-mode baroclinic Rossby wave to traverse the entire basin in the midlatitude North Pacific (∼30°N). We therefore investigated the predictability using an ocean general circulation model driven by the wind stress data from the National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) reanalysis. Referring to a hindcast experiment as the control run, we carried out fifteen forecast experiments, the initial conditions of which are taken from the hindcast experiment at intervals of two years during the period from the end of 1969 to the end of 1997. Each of the forecast experiments is driven only by wind stress in the year preceding each experiment. The forecasted Kuroshio transport anomaly south of Japan agrees better with the hindcasted one during the first two years of the forecast in most cases. In some cases, however, significant disagreements occur, most of which are likely due to larger unpredictable variations caused by wind stress anomalies near Japan. At the end of forecast year 2, the anomaly correlation coefficient is about 0.7, and rms of the forecast error is smaller than rms of the hindcasted anomaly. These results indicate that the prediction of the interannual variability in the Kuroshio transport could be made two years in advance at a statistically significant level. This revised version was published online in July 2006 with corrections to the Cover Date.     

Magmatic inclusions and felsic clasts in the Dar al Gani 319 polymict ureilite

Abstract— Magmatic inclusions occur in type II ureilite clasts (olivine‐orthopyroxene‐augite assemblages with essentially no carbon) and in a large isolated plagioclase clast in the Dar al Gani (DaG) 319 polymict ureilite. Type I ureilite clasts (olivine‐pigeonite assemblages with carbon), as well as other lithic and mineral clasts in this meteorite, are described in Ikeda et al.(2000). The magmatic inclusions in the type II ureilite clasts consist mainly of magnesian augite and glass. They metastably crystallized euhedral pyroxenes, resulting in feldspar component‐enriched glass. On the other hand, the magmatic inclusions in the large plagioclase clast consist mainly of pyroxene and plagioclase, with a mesostasis. They crystallized with a composition along the cotectic line between the pyroxene and plagioclase liquidus fields. DaG 319 also contains felsic lithic clasts that represent various types of igneous lithologies. These are the rare components not found in the common monomict ureilites. Porphyritic felsic clasts, the main type, contain phenocrysts of plagioclase and pyroxene, and their groundmass consists mainly of plagioclase, pyroxene, and minor phosphate, ilmenite, chromite, and/or glass. Crystallization of these porphyritic clasts took place along the cotectic line between the pyroxene and plagioclase fields. Pilotaxitic felsic clasts crystallized plagioclase laths and minor interstitial pyroxene under metastable conditions, and the mesostasis is extremely enriched in plagioclase component in spite of the ubiquitous crystallization of plagioclase laths in the clasts. We suggest that there are two crystallization trends, pyroxene‐metal and pyroxene‐plagioclase trends, for the magmatic inclusions and felsic lithic clasts in DaG 319. The pyroxene‐metal crystallization trend corresponds to the magmatic inclusions in the type II ureilite clasts and the pilotaxitic felsic clasts, where crystallization took place under reducing and metastable conditions, suppressing precipitation of plagioclase. The pyroxene‐plagioclase crystallization trend corresponds to the magmatic inclusions in the isolated plagioclase clast and the porphyritic felsic clasts. This trend developed under oxidizing conditions in magma chambers within the ureilite parent body. The felsic clasts may have formed mainly from albite component‐rich silicate melts produced by fractional partial melting of chondritic precursors. The common monomict ureilites, type I ureilites, may have formed by the fractional partial melting of alkali‐bearing chondritic precursors. However, type II ureilites may have formed as cumulates from a basaltic melt.     

The content of selenium and its chemical form in sea water

By using the new fluorometric method of determination of the total selenium ( Se), Se (IV) and Se (VI), the content of selenium in sea weter was determined in the western North Pacific. Results showed that the content of Se in surface water ranged from 0.06 to 0.12g l^–1, while in deeper layers, the content increased to 0.20g l^–1. It was found that Se (IV) showed rather uniform distribution with depth, while Se (VI) increased with depth to about three times that in the surface. The ratio of Se (IV) to the Se ranged from 0.5 to 0.8 in the surface and 0.4 to 0.6 in the deep. The coexistence of the hexa- and tetravalent ions of selenium was confirmed both in surface and deep layers. Some results of observations on the content of selenium in the coastal areas of Japan were also reported.     

A new fluorometric method of analysis of selenium in sea water

A new method of determination of selenium and separation of Se(IV) and Se(VI) in sea water is described. The selenium is determined by fluorometric method using Se-DAN complex in cyclohexane media. Prior to the fluorometric determination, Se(IV) is separated from sea water by means of Se(IV)-DDTC complex which is adsorbed on the macroreticular resin. As to the separation of the total selenium from sea water sample, the reduction and coprecipitation method is used. Se(VI) is determined with the same method as used for the total selenium after the separation of Se(IV). The average recoveries are 92.5±1.3% for Se(IV) and 97.4±0.9% for Se. The standard deviation of analytical results is below 10%.