Development and Extension of Seawater Desalination by Reverse Osmosis

Seawater desalination has been people‘s fond dream since ancient times,the dream is now becoming a reality.This paper presents a brief development history of reverse osmosis.Much attention was paid to innovative development in mebranes,modules.equipments and applied technology,including asymmetric and composite membranes,spiral-wound element and hollow fiber module,energy recovery equipments and different technological processes.The extension of reverse osmosis,such as desalination,pre-concentration,integrated processes and nanofiltration,is also briefly mentioned.     

Subunit composition and chromophore content of R-phycocyanin and allophycocyanin from Porphyra haitanensis

ＳｕｂｕｎｉｔｃｏｍｐｏｓｉｔｉｏｎａｎｄｃｈｒｏｍｏｐｈｏｒｅｃｏｎｔｅｎｔｏｆＲ－ｐｈｙｃｏｃｙａｎｉｎａｎｄａｌｌｏｐｈｙｃｏｃｙａｎｉｎｆｒｏｍＰｏｒｐｈｙｒａｈａｉｔａｎｅｎｓｉｓ￥ＧａｏＨｏｎｇｆｅｎｇ；ＣａｏＷｅｎｄａａｎｄＪｉＭｉｎｇ...     

海上油井密封套管内海水冻胀特性试验分析

1998年首次进行了海上油井密封套管内海水冻胀特性模拟试验,建立了一套各种参数的测量系统.文中介绍了管内海水冻结过程、海水过冷温度、结冰水温、轴向冻胀力以及管体应变测量结果.     

中国海岸风成沙ESR测年的研究

介绍ＥＳＲ测年的基本原理，并讨论风成沙Ｇｅ心测年的可行性、风成沙Ｅ＇心的特征、测年误差及可靠性等问题。１９９２－１９９３年在渤、黄、东、南海沿岸采集的１００余个风成沙样品ＥＳＲ测年实验表明，绝大部分海岸风成沙的年龄为１－７万年。     

基于GIS的区域经济统计分析系统的设计与实现

随着经济的发展,区域间经济相互作用和影响的关系越来越密切,忽略空间相互作用的传统区域经济分析手段和方法开始显现出一些明显的不足。而GIS在处理和分析区域地理数据上具有强大的空间分析能力,为此我们引入GIS工具对区域经济进行分析,相较于传统的分析手法有了很大改善。本文以江西省区域经济数据为例,设计了一个基于GIS的区域经济统计分析系统,并利用Arcob-jects二次开发控件结合VB可视化编程语言,实现了大部分区域经济统计分析功能,最后并将结果进行网络发布。研究结果表明将GIS引入到区域经济统计分析中,更能正确、有效的揭示区域经济发展在空间上的联系,为区域经济研究决策提供服务。     

节理岩体卸荷强度特性的试验研究

卸荷状态工程岩体的强度特性与传统的加载岩体有本质的区别。目前对于岩石卸荷强度特性的研究比较多见,但对于含节理的岩体在卸荷应力状态下的强度特性,尤其是节理面对其强度的影响研究实属少见。本文通过岩体三轴模拟试验研究了卸荷应力状态下节理岩体的破坏特征,突出考虑了节理面性质对卸荷强度的影响,在此基础上提出了节理岩体卸荷强度准则的一般表达式并进行了对比验证。     

2004年夏季哈尔滨 5次短时强降水天气过程的对比分析

2004年夏季, 哈尔滨在 40d中发生了 5次短时强降水灾害,城市内涝严重,部分交通干线瘫痪.短时强降水天气多发生于中小尺度天气系统,空间尺度小,生命史短,预报难度大.虽然前人在此方面已做过大量工作,但在干旱的气候背景下,为什么频繁发生短时强降水天气,它们的共同特征是什么？本文从环流条件、卫星云图、多普勒雷达回波以及物理量场进行分析,对上述问题进行了探讨.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.