Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

On penetration depth of the Shoemaker-Levy 9 fragments into the Jovian atmosphere

The actual penetration depth of the Shoemaker-Levy 9 fragments into the Jovian atmosphere is still an open question. From fundamental equations of meteoric physics with variable cross-section, a new analytic model of energy release of the fragments is presented. In use of reasonable parameters, a series of results are calculated for different initial mass of the fragments. The results show that the largest fragment explodes above pressure levels of 3 bars and does not penetrate into the H₂O cloud layer of the Jovian atmosphere, and that airburst of smaller fragments occur even above the upper cloud layer.     

A MESO-β SCALE SIMULATION OF THE EFFECTS OF BOREAL FOREST ECOSYSTEM ON THE LOWER ATMOSPHERE

Based on the Intensive Field Campaign(IFC-1)data of Boreal Ecosystem-Atmosphere Study(BOREAS).a three-dimensional meso-β scale model is used to simulate the effect of boreal forests onthe lower atmosphere.A fine horizontal resolution of 2 km×2 km is used in order to distinguish thevegetative heterogeneity in the boreal region.A total of 20×25 grid points cover the entire sub-modeling area in BOREAS' South Study Area(SSA).The ecosystem types and their coverage ineach grid square are extracted from the North American Land Cover Characteristics Data Base(NALCCD)generated by the U.S.Geographical Survey(USGS)and the University of Nebraska-Lincoln(UNL).The topography of the study area is taken from the Digital Elevation Map(DEM)of USGS.The model outputs include the components of the energy balance budget within the canopyand at the ground.the turbulence parameters in the atmospheric boundary layer and the wind.temperature and humidity profiles extending up to a height of 1500 m.In addition to the fine timeand spatial step,the unique feature of the present model is the incorporation of both dynamic andbiological effects of the Boreal forest into the model parameterization scheme.The model resultscompare favorably with BOREAS' IFC-1 data in 1994 when the forest was in the luxuriant growingperiod.     

基于Chandra的活动星系核观测

活动星系核（AGN）是宇宙中最奇特的天体之一。它是真正意义上的全波天体，其中X射线波段的发射功率占到全波段功率的50％左右。AGN的X射线辐射研究涉及天体物理中的最基本问题，例如能量产生、辐射机制和宇宙论等，而Chandra X射线卫星的高分辨率图像和光谱对这一研究有着重要作用。以Chandra卫星的部分观测结果为例，简要介绍了几类不同类型AGN的X射线辐射研究进展：（1）宽吸收线类星体APM08279＋5255（z=3．91）的X射线谱分析，以及高红移类星体的观测概况；（2）Seyfert星系NGC 4151延展X射线发射问题的解决，及NGC 1068X射线辐射与光学波段的高激发态发射线（[OⅢ]λ5007）有很强相关性的发现；（3）6个BLLac天体样本的X射线环境分析；（4）射电星系X射线喷流的观测等。     

彭州市立体农业气候资源的研究(二)热量资源分析

利用彭州市境内市气象站，新兴，白果坪的日平均气温资料，进行热量资源分析。结果表明，彭州市7－8月为最热月，多年平均温度低于24．9℃，12－2月为最冷月，多年平均温度高于1．7℃。大多数年全年稳定通过0℃，可一年四季进行农业耕作，有利于作物越冬和多年生作物的种植，生长期长，积温丰富。界限温度的初，终日期及持续日数变化较大，积温际变化显著，热量资源随海拔高度增加而减少，各界限温度的初日推迟，终日提前，持续日数和积温减少，温度强度也降低，形成显著的立体农业气候。     

彭州市立体农业气候资源的研究(一)降水资源分析

分析了彭州市境内位于不同海拔高度的4个观测站的降水资料，结果表明，彭州市雨量充沛，但降水量的年际变化显著，雨季起、止时间和雨季长、短的年际变化很大，降水的时间分配极不均匀，因为这4个站具有相同的气候背景、，降水量的年、季、月变化呈现基本一致的规律和趋势，但因为海拔高度不同等气候背的差异，4站的降水特点又显著不同。降水量随海拔高度的升高而增加，降水变幅和雨日也阴海拔高度的升高而增加，大降水过程具有明显的局地性，不同海拔高度的旱、涝情况亦有差异，降水的空间分布表现出明显的立体性特征。     

Formation Pressure Evaluation Method for Single Well

The paper deals with the methods of formation pressure evaluation for a single well by using the very common ac-cepted parameters, such as drilling exponent , and flowline temperature , etc. which is part of compiling the end well report.     

用PCI中断实现射电望远镜跟踪的方法

讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。