Oxygen isotope cosmothermometer revisited

A previously published estimate of the oxygen isotopic composition of the gas of the early solar nebula must be revised in light of the discovery of non-chemical isotope effects in carbonaceous chondrites. The solids which accreted to form the Earth, Moon and ordinary chondrites probably did not equilibrate isotopically with the gas below 1000 K.     

Mbosi: An anomalous iron with unique silicate inclusions

Abstract— The Mbosi iron meteorite contains millimeter size silicate inclusions. Mbosi is an ungrouped iron meteorite with a Ge/Ga ratio >10, which is an anomalous property shared with the five-member IIF iron group, the Eagle Station pallasites and four other ungrouped irons. Neither the IIF group nor the four other ungrouped irons are known to have silicate inclusions. Chips from three Mbosi inclusions were studied, but most of the work concentrated on a whole 3.1 mm circular inclusion. This inclusion consists of a mantle and a central core of different mineralogies. The mantle is partially devitrified quartz-normative glass, consisting of microscopic crystallites of two pyroxenes and plagioclase, which are crystalline enough to give an x-ray powder diffraction pattern but not coarse enough to permit analyses of individual minerals. The core consists of silica. The bulk composition does not match any known meteorite type, although there is a similarity in mode of occurrence to quartz-normative silicate inclusions in some HE irons. Mbosi silicate appears to be unique. The bulk rare earth element (REE) pattern of the mantle is flat at ? 7×C1; the core is depleted in REE but shows a small positive Eu anomaly. The O-isotope composition of bulk silicate lies on a unit slope mixing line (parallel and close to the C3 mixing line) that includes the Eagle Station pallasites and the iron Bocaiuva (related to the IIF irons); all of these share the property of having Ge/Ga ratios >10. It is concluded that Mbosi silicate represents a silica-bearing source rock that was melted and injected into metal. Melting occurred early in the history of the parent body because the metal now shows a normal Widmanstätten structure with only minor distortion that was caused when the parent body broke up and released meteorites into interplanetary space. The cause of Ge/Ga ratios being >10 in these irons is unknown. The fact that silicates in Mbosi, Bocaiuva (related to IIF irons) and the Eagle Station trio of pallasites, all characterized by a Ge/Ga ratio >10, lie on a unit slope mixing line in the O-isotope diagram suggests that their origins are closely related. The C3 chondrites appear to be likely precursors for silicates in Mbosi, Bocaiuva and the Eagle Station pallasites.     

CMT data inversion using a Bayesian information criterion to estimate seismogenic stress fields

We developed an inversion method to estimate the stress fields related to earthquake generation (seismogenic stress fields) from the centroid moment tensors (CMT) of seismic events by using Akaike's Bayesian information criterion (ABIC). On the idea that the occurrence of an earthquake releases some part of the seismogenic stress field around its hypocentre, we define the CMT of a seismic event by a weighted volume integral of the true but unknown seismogenic stress field. Representing each component of the seismogenic stress field by the superposition of a finite number of 3-D basis functions (tri-cubic B-splines), we obtain a set of linear observation equations to be solved for the expansion coefficients (model parameters). We introduce prior constraint on the roughness of the seismogenic stress field and combine it with observed data to construct a Bayesian model with hierarchic, highly flexible structure controlled by hyper-parameters. The optimum values of the hyper-parameters are objectively determined form observed data by using ABIC. Given the optimum values of the hyper-parameters, we can obtain the best estimates of model parameters by using a maximum likelihood algorithm. We tested the validity of the inversion method through numerical experiments on two synthetic CMT data sets, assuming the distribution of fault orientations to be aligned with the maximum shear stress plane in one case and to be random in the other case. Then we applied the inversion method to actual CMT data in northeast Japan, and obtained the pattern of the seismogenic stress field consistent with geophysical and geological observations.     

Predicting Soil-Water and Soil-Air Transport Properties and Their Effects on Soil-Vapor Extraction Efficiency

Accurate prediction of water and air Iran sport parameters in variably saturated soil is necessary for modeling of soil-vapor extraction (SVE) at soil sites contaminated with volatile organic chemicals (VOCs). An expression for predicting saturated water permeability (k_l,s) in undisturbed soils from the soil total porosity and the field capacity soil-water content was developed by fitting a tortuous-tube fluid flow model to measured water permeability and gas diffusivity data. The new k_l,s expression gave accurate predictions when tested against independent k_l,s data. The k_l,s expression was implemented in the Campbell relative water permeability model to yield a predictive model for water permeability in variably saturated, undisturbed soil. The water permeability model, together with recently developed predictive equations for gas permeability and gas diffusivity, was used in a two-dimensional numerical SVE model that also included non-equilibrium mass transfer of VOC from a separate phase (nonaqueous phase liquid [NAPL]) to the air phase. SVE: calculations showed that gas permeability is likely the most important factor controlling VOC migration and vapor extraction efficiency. Water permeability and gas diffusivity effects became significant at water contents near and above field capacity. The NAPL-air mass transfer coefficient also had large impacts on simulated vapor extraction efficiency. The calculations suggest that realistic SVE models need to include predictive expressions for both conveciive, diffusive. and phase-partitioning processes in natural, undisturbed soils.     

Watson: A new link in the HE iron chain

Abstract— Watson, which was found in 1972 in South Australia, contains the largest single silicate rock mass seen in any known iron meteorite. A comprehensive study has been completed on this unusual meteorite: petrography, metallography, analyses of the silicate inclusion (whole rock chemical analysis, INAA, RNAA, noble gases, and oxygen isotope analysis) and mineral compositions (by electron microprobe and ion microprobe). The whole rock has a composition of an H-chondrite minus the normal H-group metal and troilite content. The oxygen isotope composition is that of the silicates in the HE iron meteorites and lies along an oxygen isotope fractionation line with the H-group chondrites. Trace elements in the metal confirm Watson is a new HE iron. Whole rock Watson silicate shows an enrichment in K and P (each ～2X H-chondrites). The silicate inclusion has a highly equilibrated igneous (peridotite-like) texture with olivine largely poikilitic within low-Ca pyroxene: olivine (Fa₂₀), opx (Fs₁₇Wo₃), capx (Fs₉Wo₄₁) (with very fine exsolution lamellae), antiperthite feldspar (An_1–Or₅) with <1 μm exsolution lamellae (An_1–3Or_>40), shocked feldspar with altered stoichiometry, minor whitlockite (also a poorly characterized interstitial phosphate-rich phase) and chromite, and only traces of metal and troilite. The individual silicate minerals have normal chondritic REE patterns, but whitlockite has a remarkable REE pattern. It is very enriched in light REE (La is 720X C1, and Lu is 90X C1, as opposed to usual chonditic values of ～300X and 100–150X, respectively) with a negative Eu anomaly. The enrichment of whole rock K is expressed both in an unusually high mean modal Or content of the feldspar, Or₁₃, and in the presence of antiperthite. Whole rock trace element data for the silicate mass support the petrography. Watson silicate was an H-chondrite engulfed by metal and melted at > 1550 °C. A flat refractory lithophile and flat REE pattern (at ～1x average H-chondrites) indicate that melting took place in a relatively closed system. Immiscible metal and sulfide were occluded into the surrounding metal host. Below 1100 °C, the average cooling rate is estimated to have been ～1000 °C/Ma; Widmanstätten structure formed, any igneous zoning in the silicates was equilibrated, and feldspar and pyroxene exsolution took place. Cooling to below 300 °C was completed by 3.5 Ga B. P. At 8 Ma, a shock event took place causing some severe metal deformation and forming local melt pockets of schreibersite/metal. This event likely caused the release of Watson into interplanetary space. The time of this event, 8Ma, corresponds to the peak frequency of exposure ages of the H-chondrites. This further confirms the link between HE irons and the H-chondrites, a relationship already indicated by their common oxygen isotope source. Watson metal structures are very similar to those in Kodaikanal. Watson, Kodaikanal and Netschaëvo form the young group of HE meteorites (ages 3.7 ± 0.2 Ga). They appear to represent steps in a chain of events that must have taken place repeatedly on the HE parent body or bodies from which they came: chondrite engulfed in metal (Netschaëvo); chondrite melted within metal (Watson); and finally melted silicate undergoing strong fractionation with the fractionated material emplaced as globules within metal (Kodaikanal). Watson fills an important gap in understanding the sequence of events that took place in the evolution of the IIE-H parent body(ies). This association of H-chondrite with HE metal suggests a surface, or near surface process-a suggestion made by several other researchers.     

BOCAIUVA—A SILICATE-INCLUSION BEARING IRON METEORITE RELATED TO THE EAGLE-STATION PALLASITES

Bocaiuva is a unique meteorite consisting of major metal having a high Ge/Ga ratio and minor (～ 50 mg/g) silicates. The silicates are generally chondritic and consist of major olivine (Fa.7.7) and orthopyroxene (Fs7.6) and minor plagioclase (Ab49, An49) and clinopyroxene (Fs4.5, Wo42). The low alkali content of the silicates is the only property inconsistent with a chondritic composition. Based on metal composition Bocaiuva seems distantly related to certain iron meteorites having similar Ge contents and similar Ge/Ga ratios, but detailed comparison with six such irons shows none to be closely related to Bocaiuva. Perhaps most closely related is Cold Bay, a member of the Eagle-Station trio of pallasites, but its composition is too different to suggest formation on the same parent body. Oxygen-isotope data show that Bocaiuva silicates are closely related to those in the Eagle-Station pallasites and to the CO and CV chondrites. The composition and texture of the Bocaiuva metal-silicate assembly indicate mixing in an impact event. We suggest that the Eagle-Station pallasites were also formed by impact heating rather than by a long-lived internal heat source.     

Cristobalite-pyroxene in an L6 chondrite: implications for metamorphism

CRISPY is a cristobalite-pyroxene assemblage in the L6 chondrite ALHA 76003. It was formed by reaction of a very siliceous inclusion with the surrounding olivine-rich rock. Oxygen isotopes show that the inclusion was derived from a source with non-chondritic isotopic composition. The isotopes also show that the oxygen of the pyroxene reaction product was derived by simple mixing of oxygen from the inclusion and its immediately adjacent surroundings, with exchange with the bulk meteorite limited to a distance of about a millimeter. The persistence of cristobalite in close proximity to olivine, and the lack of isotopic equilibration, show that the metamorphic processes that form petrographic grade 6 chondrites involve transport of major elements over distances only on the order of millimeters.     

Petrography and geochemistry of eclogites from the Mir kimberlite,Yakutia, Russia

 Diamond-bearing eclogites are an important component of the xenoliths that occur in the Mir kimberlite, Siberian platform, Russia. We have studied 16 of these eclogite xenoliths, which are characterized by coarse-grained, equigranular garnet and omphacite. On the basis of compositional variations in garnet and clinopyroxene, this suite of eclogites can be divided into at least two groups: a high-Ca group and a low-Ca group. The high-Ca group consists of high-Ca garnets in equilibrium with pyroxenes that have high Ca-ratios [Ca/(Ca+Fe+Mg)] and high jadeite contents. These high-Ca group samples have high modal% garnet, and garnet grains often are zoned. Garnet patches along rims and along amphibole- and phlogopite-filled veins have higher Mg and lower Ca contents compared to homogeneous cores. The low-Ca group consists of eclogites with low-Ca garnets in equilibrium with pyroxenes with a low Ca-ratio, but variable jadeite contents. These low-Ca group samples typically have low modal% of garnet, and garnets are rarely compositionally zoned. Three samples have mineralogic compositions and modes transitional to the high- and low-Ca groups. We have arbitrarily designated these samples as the intermediate-Ca group. The rare-earth-element (REE) contents of garnet and clinopyroxene have been determined by ion microprobe. Garnets from the low-Ca group have low LREE contents and typically have [Dy/Yb]_n < 1. The high-Ca group garnets have higher LREE contents and typically have [Dy/Yb]_n > 1. Garnets from the intermediate-Ca group have REE contents between the high- and low-Ca groups. Clinopyroxenes from the low-Ca group have convex-upward REE patterns with relatively high REE contents (ten times chondrite), whereas those from the high-Ca group have similar convex-upward shapes, but lower REE contents, approximately chondritic. Reconstructed bulk-rock REE patterns for the low-Ca group eclogites are relatively flat at approximately ten times chondrite. In contrast, the high-Ca group samples typically have LREE-depleted patterns and lower REE contents. The δ¹⁸O values measured for garnet separates range from 7.2 to 3.1‰. Although there is a broad overlap of δ¹⁸O between the low-Ca and high-Ca groups, the low-Ca group samples range from mantle-like to high δ¹⁸O values (4.9 to 7.2‰), and the high-Ca group garnets range from mantle-like to low δ¹⁸O values (5.3 to 3.1‰). The oxygen isotopic compositions of two of the five high-Ca group samples and four of the eight low-Ca group eclogites are consistent with seawater alteration of basaltic crust, with the low-Ca group eclogites representative of low-temperature alteration, and the high-Ca group samples representative of high-temperature hydrothermal seawater alteration. We interpret the differences between the low- and high-Ca group samples to be primarily a result of differences in the protoliths of these samples. The high-Ca group eclogites are interpreted to have protoliths similar to the mid to lower sections of an ophiolite complex. This section of oceanic crust would be dominated by rocks which have a significant cumulate component and would have experienced high-temperature seawater alteration. Such cumulate rocks probably would be LREE-depleted, and can be Ca-rich because of plagioclase or clinopyroxene accumulation. The protoliths of the low-Ca group eclogites are interpreted to be the upper section of an ophiolite complex. This section of oceanic crust would consist mainly of extrusive basalts that would have been altered by seawater at low temperatures. These basaltic lavas would probably have relatively flat REE patterns, as seen for the low-Ca group eclogites. Received: 10 July 1995 / Accepted: 17 May 1996     

Lea County 001, an H5 chondrite,and Lea County 002, an ungrouped type 3 chondrite

Abstract— A search of active deflation basins near Jal, Lea County, New Mexico resulted in the discovery of two meteorites, Lea County 001 and 002. Lea County 001 has mean olivine and low-Ca pyroxene compositions of Fa₁₉ and Fs₁₇, respectively. These and all other mineralogical and petrological data collected indicate a classification of H5 for this stone. Lea County 002 has mean olivine and low-Ca pyroxene compositions of Fa₂ and Fs₄, and is unequilibrated. Although it is mineralogically most similar to Kakangari and chondritic clasts within Cumberland Falls, the high modal amount of forsterite makes Lea County a unique type 3 chondrite. Oxygen isotope data for Lea County 002 fall on an ¹⁶O-mixing line through those of the enstatite meteorites and IAB irons, a feature shared by Kakangari.     

Relationship between trace elements and depositional environments in shallow sediments: a case study from Southern Kanto Plain,Central Japan

Underground developments such as subways and shopping facilities have been increasing in number and magnitude in the relatively shallow subsurface of many urban areas where the earth materials commonly are composed of marine sediments. Marine sediments can contain significant amounts of toxic trace elements such as arsenic, boron, and lead. Changes in the subsurface environment caused by excavation and construction in underground developments could potentially cause these toxic elements to be dissolved into pore water of the sediments, which might lead to groundwater pollution. The purpose of this study is to investigate correlations among chemical properties of marine sediments, such as pH and electrical conductivity (EC), concentrations of toxic trace elements, and stratigraphic characteristics of the sediments. We selected three sites with different stratigraphic settings in the southern Kanto Plain around the Tokyo Metropolis. We collected core samples from shallow strata at a site in the Arakawa Lowland, southern Saitama, and at two sites in the Musashino Upland, Middle Tokyo. All sites have both marine and non-marine sediments up to 50–60 m in thickness. We determined trace element concentrations in the pore water, pH, EC, and loss on ignition. The results show that (1) the marine sediments tend to have low pH, high EC, and high sulfur concentration compared to the non-marine sediments (2) the concentration of most of the soluble heavy metals vary depending on the concentration of sulfate, the pH, and the formation processes of the strata, (3) the arsenic concentration is not related to sulfur concentration but apparently to Fe and Al concentrations, (4) the boron concentration is not related to any other properties implying that the boron level is independent of and cannot be predicted by common chemical properties, and (5) for all three sites, concentrations of most of the trace elements, EC, pH, and sulfate concentration were correlated with each other. This study shows that the concentration and potential mobilization of many toxic trace elements in marine sediments could be predicted by easily measurable pore water chemical properties such as pH and EC. This could be useful for predicting and avoiding the risk of groundwater pollution during underground development projects.