基于Matlab的水准点稳定性分析

通过使用Matlab功能强大的数学软件，应用于测量工程的数据处理。具体解决变形监测中水准点是否稳定的判定问题。并通过计算实例说明其可行性和优越性。     

Climatic response of thick leaf spruce (Picea crassifolia) tree-ring width at different elevations over Qilian Mountains, northwestern China

Tree-ring cores of thick leaf spruce (Picea crassifolia) taken from four sites at different elevations, in the middle of the Qilian Mountains, in the arid and semi-arid region of northwestern China, were used to develop four tree-ring width chronologies using standard dendrochronological methods. Results indicate that with increasing altitude the chronologies’ year-to-year variations decreased. Hence, the sensitivity of the tree-ring chronologies to climate decreases with altitude. Further analysis showed that the significant limiting factor on tree growth is spring precipitation. Measurements of stomata density and leaf dry weight suggest the species’ ecological adaptation strategy changes with elevation. At high elevation the metabolic rate of thick leaf spruce decreases, thus showing the effect of the climate.     

高阶边界元方法求解规则波在三维局部渗透海床上的传播

基于线性势流理论,利用高阶边界元法研究了规则波在三维局部渗透海床上的传播。根据Darcy渗透定律推导出渗透海床的控制方程,利用渗透海床顶部和海底处法向速度和压强连续条件得到渗透海床顶部满足的边界条件。根据绕射理论,利用满足自由水面条件的格林函数建立了求解渗透海床绕射势的边界积分方程,采用高阶边界元方法求解边界积分方程进而得到自由水面的绕射势和波浪在局部渗透海床上传播过程中幅值的变化情况。通过与已发表的波浪对圆柱形暗礁的时域全绕射结果对比,证明了本文建立的频域方法计算波幅的正确性和有效性。利用这一模型研究了三维矩形渗透海床区域上波浪的传播特性,并分析了入射波波长、海床渗透特性系数等参数对波浪传播的影响。     

Zircon U-Pb Geochronology,Geochemistry and Petrogenesis of Early Cretaceous A-type Granites in the Mikengshan Area,Southern Jiangxi ProvinceEI北大核心CSCD

In the Mikengshan-Yanbei area, a special region for the tin mineralization in South China, there are some Yanshanian granites and porphyries and associated porphyry tin deposits (e.g., Yanbei). Although the tin mineralization is closely associated with the granitoids magmatism, the age and petrogenesis of the granites remain controversial. The Mikengshan pluton, which intrudes into the rhyolitic tuff and pyroclastic rocks of the Upper Jurassic Jilongzhang Formation, is the largest one in Mikengshan-Yanbei area and mainly consists of K-feldspar bearing granites. In this study, we report new age and geochemical data for the Mikengshan K-feldspar bearing granites. LA-ICP-MS zircon U-Pb age dating shows that they were generated in the Early Cretaceous (~138 Ma). They have high SiO2 (74.42% to 76.69%), low Al2O3 (12.39% to 13.49%) and Mg# (11 to 19), and negative Eu, Sr and Ba anomalies, and are rich in potassium (most K2O/Na2O=1.37 to 1.94) and high field strength elements (HFSEs), and are weakly peraluminous (A/CNK=1.03 to 1.1) with high 10000×Ga/Al ratios (3.46 to 4.96) and slightly high zircon saturation temperatures (807 ℃ to 817 ℃), showing the characteristics of the typical A-type granites. Moreover, they have high Rb contents 842×10-6 to 1295×10-6, Rb/Sr (90 to 255) ratios and show rare earth elements (REE) tetrad effect, which are similar to those of high fractionated granites. Thus, we suggested that the Mikengshan K-feldspar bearing granites are high fractionated and aluminous A-type granite. Their slightly high εNd(t) values (-3.4 to -4.6) indicate that the mantle components should have played a role during their formation. Taking into account regional igneous rocks and tectonic setting data, we suggest that the Mikengshan K-bearing granites were formed in an extensional setting, which was probably related to the roll-back of the subducted Paleo-Pacific plate. © 2018, Science Press. All right reserved.     

Monotonic and cyclic characteristics of K0-Consolidated saturated soft clay under a stress path involving a variable confining pressure

In certain field conditions such as offshore projects under wave loads or embankments under traffic loads, both the vertical and horizontal stresses are variable. However, previous investigations rarely considered the variation in horizontal stress. To better understand the characteristics of natural saturated soft clay, a series of monotonic and cyclic triaxial tests with a K₀-consolidation state were carried out under a variable confining pressure (VCP) stress path. The development of axial strain, pore water pressure and effective stress path is analysed. The results show that with the increase in η (the ratio of the variation in the mean effective principal stress to that of the deviatoric stress), the undrained shear strength (q_f) decreases continuously. The pore water pressure generation is slightly improved under a stress path with increasing confining pressure. Based on the test results, a unified formula was established to predict the pore water pressure under VCP stress paths. The unique p–q–e relationship of normally consolidated clay in monotonic VCP triaxial tests was also demonstrated. Under VCP stress paths, the amplitude of the pore pressure increases, and the effective stress path tilts more sharply to the right. Moreover, a unified formula was established that can provide a good reference for predicting effective stress paths under cyclic VCP triaxial tests.

     

Numerical simulation and evaluation of the fracturing and tight gas production with a new dimensionless fracture conductivity (FCD) model

Hydraulic fracturing is an essential technology for the development of unconventional resources such as tight gas. The evaluation of the fracture performance and productivity is important for the design of fracturing operations. However, the traditional dimensionless fracture conductivity is too simple to be applied in real fracturing operations. In this work, we proposed a new model of dimensionless fracture conductivity (F_CD), which considers the irregular fracture geometry, proppant position and concentration. It was based on the numerical study of the multistage hydraulic fracturing and production in a tight gas horizontal well of the North German Basin. A self-developed full 3D hydraulic fracturing model, FLAC3D^plus, was combined with a sensitive/reliability analysis and robust design optimization tool optiSLang and reservoir simulator TMVOCMP to achieve an automatic history matching as well as simulation of the gas production. With this tool chain, the four fracturing stages were history matched. The simulation results show that all four fractures have different geometry and proppant distribution, which is mainly due to different stress states and injection schedule. The position and concentration of the proppant play important roles for the later production, which is not considered in the traditional dimensionless fracture conductivity F_CD. In comparison, the newly proposed formulation of F_CD could predict the productivity more accurately and is better for the posttreatment evaluation.

     

Research on the panel adjustment method of an active main reflector for a large radio telescope

The surface accuracy of a large parabolic antenna is an important indicator to evaluate the quality of the antenna.It not only directly affects the antenna’s aperture efficiency,thereby determining the shortest wavelength that the antenna can work,but also affects the main lobe width and side lobe structure of the antenna pattern.Microwave holography is an important method for parabolic antenna profile detection.In this article we adopt a new algorithm to adjust the panels for the large radio telescope with an active main reflector through the TM65 m antenna’s aperture phase profile.The panels of the TM65 m radio telescope is in a radial pattern with 14 rings.Each corner of the panel is fixed on the screw of the actuator to move up and down,and the adjacent corners of the four panels share an actuator.We use the method of plane fitting to calculate the adjustment value of every panel’s corner.But one actuator,which simultaneously controls the common corner of the adjacent panels,will have different adjustment values according to the different plane fitting equation based on adjacent panels.In this paper,the adjustment value of the adjacent panels’crosspoints are constrained to be equal to the constraint condition to calculate each actuator’s adjustment value of the TM65 m radio telescope.Through multiple adjustments and application of the new algorithms,the accuracy of the TM65 m antenna reflector profile has been improved from the original 0.28 mm to the current 0.19 mm.     

中国斑岩铜矿与埃达克(质)岩关系探讨

对比研究了中国26个主要斑岩铜矿的地球化学特征和年代学,结果表明其中25个矿床与埃达克(质)岩有成因联系,且多数与玄武质下地壳熔融形成的埃达克岩(C型)有关,现有数据表明土屋-延东和普朗斑岩铜矿可能与俯冲板片熔融形成的埃达克岩(O型)有关。容矿斑岩的初始锶值为0.7034～0.7090,均大于洋中脊玄武岩和亏损地幔的初始锶值,多数与EMI的初始锶值接近,推测其源区或源岩主要为玄武质下地壳,少数为洋中脊玄武岩,并受到中、上地壳不同程度的混染,这与两类埃达克岩的源区基本一致。虽然埃达克质岩浆具有形成斑岩铜矿的巨大潜力,但并非所有埃达克岩都能成矿,不同岩体需具体分析。     

城市群创新联系网络结构与创新效率研究

引入修正引力模型、社会网络分析方法、DEA模型以及Tobit模型,探讨2001—2015年京津冀、长三角、珠三角三大城市群的创新联系网络结构对创新效率的影响。研究表明：① 创新联系格局方面,京津冀城市群呈现以“京津”为核心的放射状发展特征,长三角城市群呈现以“Z”字形为主轴的类钻石型空间格局,珠三角城市群形成了以珠江口两侧城市为核心、其他城市为重要节点的空间格局;② 在创新联系网络结构特征方面,京津冀城市群呈极核式发展,群内创新联系高度依赖于核心城市,长三角和珠三角城市群由单中心驱动转变为多中心驱动,呈均衡发展特征,京津冀和珠三角城市群创新联系网络具有“小世界”网络特征;③ Tobit模型回归结果显示,三大城市群中,城市节点在城市群创新联系网络中的中心位置、中介地位、对结构洞的运用能力和集聚程度对其创新效率的影响存在差异。     

深层地震资料采集的若干问题

本文着重叙述检波器组合效应、最大炮检距的选择、深反射层的共反射点离散效应等项技术和问题。另外讨论了比较理想的深层资料采集方法。