Bed forms and stratification types of modern gravel meander lobes, Nueces River, Texas

All major streams draining the southwestern flank of the Edwards Plateau in south-central Texas transport large volumes of gravel and sandy muddy gravel and are developing meander lobe sequences consisting predominantly of coarse gravel. The largest of these streams, the Nueces River, has a sinuosity index of 1.3 and an average stream surface slope of 1.8 m/km in the study area. Stream discharge is variable and has ranged from no flow to more than 17,000 m³/s. Mean clast b-axis length for the ten largest clasts at thirteen sample sites ranged from 2.5 to 10.8 cm. Velocities of 2.7-4.4 m/s 1 m above the stream bed are required to transport these clasts. Stream velocities of these magnitudes occur about once in 8 years when discharge of the Nueces River exceeds 3300 m³/s. Mean grain size of Nueces River alluvium ranges from 1.2 to 3.4 cm. At a flow depth of 1 m, sediment of this size has a critical erosion velocity of 1.8-3 m/s. Velocities of this magnitude occur about once in two years when discharge exceeds 340 m³/s. Under these conditions flow is subcritical, with critical shear stresses on depositional surfaces ranging from 6.4 to 12.7 kg/m². Gravel clasts are imbricated and channel bed forms are predominantly transverse gravel bars with slip faces ranging up to 2 m high and wavelengths in excess of 100 m. Stratification includes graded planar crossbeds and horizontal beds. Lower lateral accretion face sediments are also predominantly transverse bars; upper lateral accretion face deposits occur as longitudinal gravel ridges deposited in the lee of vegetation and, less commonly, as chute bars. Near the upper limit of meander lobes where vegetation is heavy, mud and muddy sand occur as overbank deposits; in these deposits sedimentary structures other than desiccation cracks are rare. Sedimentary sequences in gravel meander lobe systems deposited by low sinuosity streams are graded or non-graded horizontal beds and planar cross-beds overlain by mud and muddy sand interbedded with horizontally bedded gravels. Sequences may be several metres thick, but probably do not exceed 8-10 m in thickness. These deposits in turn are overlain by overbank deposits of mud and muddy sand. Similar sedimentary sequences occur in the extensive Quaternary terraces that parallel the Nueces River.     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Dissolution of Corundum and Andalusite in H2O-Saturated Haplogranitic Melts at 800{degrees}C and 200 MPa: Constraints on Diffusivities and the Generation of Peraluminous Melts

The mechanisms and kinetics of equilibration between peraluminousminerals and granitic melt were investigated experimentallyby the dissolution of corundum and andalusite into H₂O-saturatedmetaluminous haplogranitic melt at 800°C and 200 MPa. Mineraland haplogranitic glass rods were juxtaposed inside platinumcapsules, and then subjected to experimental conditions fortimes ranging from 12 to 2900 h. Upon melting, the mineral –meltinterface retreats with the square root of time. The compositionof the melt at the interface changes with time, but its ASI[aluminum saturation index = molar Al₂O₃/(CaO + Na₂O + K₂O)]remains constant at     

Fluid-absent Melting of High-grade Semi-pelites: P-T Constraints on Orthopyroxene Formation and Implications for Granulite Genesis

Rocks of semi-pelitic composition are common in high-grade terranes.The first appearance of orthopyroxene in these rocks marks thetransition from amphibolite- to granulite-facies conditions,and is commonly attributed to the process of fluid-absent partialmelting. We have conducted fluid-absent melting experimentson two natural semi-pelitic rocks (quartz, plagioclase, alkalifeldspar, biotite and garnet) with the specific objective ofdetermining the pressure–temperature conditions necessaryto produce orthopyroxene. In contrast to previous experimentalstudies, our starting materials were obtained from a transitionalamphibolite–granulite terrane. Importantly, the high TiO₂(>5 wt %) and F (>1 wt %) contents of biotite in our experimentsare more representative of biotite found in rocks on the vergeof granulite-facies conditions than those used in earlier studies.Experiments were conducted in a piston-cylinder apparatus at800–1050°C and 7–15 kbar. We reversed the firstappearance of orthopyroxene in two-stage experiments at 7 and10 kbar. Fluid-absent melting of biotite began at     

The Depleted Mantle Component in Kerguelen Archipelago Basalts: Petrogenesis of Tholeiitic-Transitional Basalts From the Loranchet Peninsula

A geochemical study of 28 Ma tholeiitic to transitional basaltsfrom the Kerguelen Archipelago (Mont des Ruches and Mont Fontaine)indicates that three distinct magma types erupted within     

Temperatures of Granulite-facies Metamorphism: Constraints from Experimental Phase Equilibria and Thermobarometry Corrected for Retrograde Exchange

This study assesses temperatures of formation of common granulitesby combining experimental constraints on the P–T stabilityof granulite-facies mineral associations with a garnet–orthopyroxene(Grt–Opx) thermobarometry scheme based on Al-solubilityin Opx, corrected for late Fe–Mg exchange. We appliedthis scheme to 414 granulites of mafic, intermediate and aluminousbulk compositions. Our findings suggest that granulites aremuch hotter than traditionally assumed and that the P–Tconditions of the amphibolite–granulite transition portrayedin current petrology textbooks are significant underestimatesby over 100°C. For aluminous and intermediate granulites,mean corrected temperatures based on our method are 890 ±17 and 841 ± 11°C, respectively (uncertainties reportedas 95% confidence limits on the mean), consistent with minimumtemperatures for orthopyroxene production by fluid-absent partialmelting in these bulk compositions. In contrast, mean temperaturesbased on Grt–Opx Fe–Mg exchange equilibria, usingthe same thermodynamic data, are 732 ± 22 and 723 ±11°C, respectively, well below the minimum temperaturesfor Opx stability. For mafic granulites, the mean correctedtemperature using our method is 816 ± 12°C, similarto the mean temperature of 793 ± 13°C from Fe–Mgexchange. Reasons for the differences between the mafic granulitesand aluminous–intermediate granulites are unclear butmay be due to the lower Al concentrations in Opx in the maficrocks and possible deficiencies in the thermodynamic modellingof these low concentrations. We discuss a number of well-knowngranulite terrains in the context of our findings, includingthe Adirondacks, the Acadian granulites of New England, theincipient charnockites of southern India and Sri Lanka, andthe Kerala Khondalite Belt. Our findings carry implicationsfor thermotectonic models of granulite formation. A computerprogram to perform our thermobarometry calculations, RCLC, isavailable from the Journal of Petrology website at http://www.petrology.oupjournals.orgor from the authors at http://www.geo.ucalgary.ca/~pattison/drm_pattison-rclc.htm. KEY WORDS: granulite-facies metamorphism; thermobarometry; garnet; orthopyroxene     

Diurnal Variations of Atmospheric Hydrogen Peroxide Concentrations in Saxony (Germany)

During a 3-year study, gaseous hydrogenperoxide (H₂O₂) concentrations were measuredas part of the SANA project at the Melpitz FieldResearch Station and in the city of Leipzig. Typicaldaily mean H₂O₂ mixing ratios on sunny dayswere 0.15 to 0.25 ppbv with maximum values of 0.3 to0.5 ppbv at Melpitz, and 0.3 to 0.6 ppbv with maximumvalues of 0.4 to 1.0 ppbv in Leipzig. Over the entireperiod of the project the maximum hourly mean valueswere 2.1 ppbv and 5.3 ppbv in Melpitz and Leipzig,respectively. The data were not complete enough to show a trend.Linear regression analysis shows, that ozone(O₃), temperature and solar radiation arepositively correlated with H₂O₂, whereasnitrogen oxides (NO_x), carbon monoxide (CO) andrelative humidity are negatively correlated. Negativecorrelation between H₂O₂ and CO is caused byjoint occurrence of CO with NO_x in exhaust gases.Negative correlation between H₂O₂ andrelative humidity is not necessarily in contradictionto the accelerating effect of water vapour onH₂O₂ formation. The strong positivecorrelation of H₂O₂ with the dew pointdifference however seems to better reflect theinfluence of water vapour. Multiple linear regression analysis (MLRA) of thecomponents measured, indicates the great influence of CO on the formation of H₂O₂ in the gasphase.     

Climatic significance of natric horizons in Permian (Asselian) palaeosols of north-central Kansas, USA

Columnar structured horizons have been recognized in ancient coastal palaeosols of several Lower Permian (Asselian) stratigraphic units of north-central Kansas. These strongly developed columnar, polygonal-shaped peds are characteristic of sodium-influenced (natric) argillic horizons, and are commonly indicative of semi-arid to arid environments. Evaporite features above and below these palaeosols support the conclusion for a dry palaeoclimate. The columnar peds are typically 3–15 cm in diameter and exhibit domed tops. Fine clay fills the cracks between the columnar peds, and is generally of a darker colour than the peds. Each natric horizon has a low value and chroma colour, apparently the result of carbonate accumulation. The natric horizons in these Permian palaeosols appear to have been partially influenced by sodium-rich groundwaters. Root traces and root moulds are found between peds in all natric horizons, indicating plant succession after columnar ped formation. These sodium-influenced palaeosol profiles occur as part of a spectrum of palaeosol types that indicate cyclical climate change associated with glacioeustatic sea-level fluctuations.     

Sedimentary model and high-frequency cyclicity in a Mediterranean, shallow-shelf, temperate-carbonate environment (uppermost Miocene, Agua Amarga Basin, Southern Spain)

Uppermost Tortonian to lower Messinian temperate carbonates crop out in the Agua Amarga Basin (SE Spain). They consist of four units. The lower three units can be tentatively assigned to the lowstand systems tract of a fourth-order sequence, constituting in turn the lowstand (‘megatrough unit’), transgressive (‘breccia unit’) and highstand (‘bedded unit’) stages of a higher-order cycle. All these materials were deposited in a small pull-apart basin related to the sinistral Carboneras strike-slip fault system. The best represented is the bedded unit (up to 25 m thick), which consists of bioclastic, bryozoan/bivalve-dominated calcarenites/calcirudites with abundant fragments of echinoids, barnacles, benthic foraminifers, coralline algae, brachiopods and solitary corals. Facies trends within this unit are roughly arranged in an E-W direction, with the coastline to the north of the basin. The depositional model is that of a gentle ramp with prograding beaches and shoals in its higher parts. Seaward of the shoals was the ‘factory area’, where most organisms lived and maximum carbonate production took place. From this area some of the skeletons were washed landwards by waves and/or currents during storms and incorporated into the shoals and beaches, and others moved downslope along the ramp as mass-flows, accumulating to form the ‘fan-bedded zone’. The factory-area and fan-bedded sediments intercalate five well-defined, thick beds of calcarenites/fine-grained calcirudites. They show bar morphologies (single or amalgamated), or make up sand-waves with very consistent tabular cross-bedding pointing landwards. These beds formed in a very shallow, wave/current-influenced, coastal environment. The bars and sand waves in the fan-bedded zone developed during lowstands, while those located higher up in the ramp interbedded with the factory facies are related to transgressive stages. Prograding beaches, shoals, factory facies and fan-bedded layers developed during the highstands. Net skeletal production occurred mainly during the highstands. Sediment-accretion values of these sediments are similar to those of present and ancient shallow-marine, temperate carbonates considering that the whole bedded unit was deposited in a 100 000-year interval (equivalent to the short eccentricity cycle). The five cycles inside the bedded unit would therefore correspond to the c. 20 000-year precession cycles of the Milankovitch band.