Participatory developing strategies for water management in South Khorasan province,Iran

Groundwater over-exploitation has been increasing in Iran. Competing demands have grown in the face of perennial water shortages, a situation which has been exacerbated by drought conditions in the past decade. This paper describes the strategy development process recently undertaken in South Khorasan, Iran, in which the inclusion of stakeholder views was central to the approach. It involved government officials and various public and private sector interest groups. Particular efforts were made to involve well irrigators, who are likely to be heavily impacted by changes required to reduce groundwater pumping to a sustainable level. The paper concludes with a discussion of lessons learned.     

Effects of biochar and bio-fertilizer on yield and qualitative properties of soybean and some chemical properties of soil

This study attempted to examine the effects of biochar amendment together with bio-fertilizer on soybean yield and its qualitative properties, as well as a few chemical properties of soil through a factorial randomized complete block design at three replications in east of Golestan Province (Iran) during 2014. The two factors under study included the following: (1) biochar amendment (in four levels of 0, 2.5, 8, and 16 tons per hectare), (2) bio-fertilizer containing phosphorus and sulfur growth-promoting rhizobacteria (in two levels of inoculation and non-inoculation) applied through foliar feeding. The results of analysis of variance indicated that interactions of biochar amendment and bio-fertilizer on harvest index and grain yield were significant (p ≤?0.01). According to the results of this study, the highest harvest index and oil content were 56.9, and 17.7%, respectively, in the treatment of 8 tons per hectare biochar and inoculation with bio-fertilizer. The lowest harvest index and the lowest oil content were in the control treatment. The interaction of biochar and bio-fertilizer on bulk density and cation exchange capacity was significant (p ≤?0.01). The results of this study demonstrated that biochar affected the amount of residual nitrogen in the soil after harvest, cation exchange capacity (CEC), acidity (pH), and electrical conductivity (EC). The highest grain yield (3440 kg/ha) was in the 8-ton biochar treatment with inoculated bio-fertilizer. Our study concludes that the biochar and bio-fertilizers can improve grain yield of soybean till 51% relative to the control.     

Issues in Eulerian–Lagrangian modeling of sediment transport under saltation regime

The saltation regime is very important for understanding the sediment transport mechanism. However,there is no consensus on a model for the saltation regime. This study answers several questions raised with respect to the Eulerian-Lagrangian modeling of sediment transport. The first question is why the previous saltation models that use different combinations of hydrodynamic forces yielded acceptable results? The second question is which shear lift model(i.e. a shear lift expression and its coefficient) is more appropriate? Another important question is which hydrodynamic forces have greater contributions to the saltation characteristics of a sediment particle? The last question is what are the contributions of the turbulence fluctuations as well as effects of using two-and three-dimensional(2 D and 3 D) models on the simulation results? In order to fairly answer these questions, a systematic study was done by considering different scenarios. The current study is the first attempt to clearly discuss these issues. A comprehensive 3 D saltation model for non-cohesive sediment was developed that includes all the hydrodynamic forces acting on the particle. The random nature of sediment transport was included using turbulent flow and bed-particle collision models. The eddy interaction model was applied to generate a3 D turbulent flow field. Bed-particle collisions were considered using the concept of a contact zone and a corresponding contact point. The validation of the model was done using the available experimental data for a wide range of sediment size(0.03 to 4.8 cm). For the first question, the results indicated that some of the hydrodynamic effects show opposing trends and some have negligible effects. With these opposing effects it is possible to adjust the coefficients of different models to achieve acceptable agreement with the same experimental data while omitting some aspects of the physics of the process. A suitable model for the shear lift force was developed by linking the lift coefficient to the drag coefficient and the contributions of the hydrodynamic forces and turbulence fluctuations as well as the consequences of using of 2 D and 3 D models were studied. The results indicate that the shear lift force and turbulent flow fluctuations are important factors for the saltation of both sand and gravel, and they cannot be ignored.     

Seismic evaluation of rocking structures through performance assessment and fragility analysis

Numerical studies have been conducted for low- and medium-rise rocking structures to investigate their efficiency as earthquake-resisting systems in comparison with conventional structures. Several non-linear time-history analyses have been performed to evaluate seismic performance of selected cases at desired ground shaking levels, based on key parameters such as total and flexural story drifts and residual deformations. The Far-field record set is selected as input ground motions and median peak values of key parameters are taken as best estimates of system response. In addition, in order to evaluate the probability of exceeding relevant damage states, analytical fragility curves have been developed based on the results of the incremental dynamic analysis procedure. Small exceedance probabilities and acceptable margins against collapse, together with minor associated damages in main structural members, can be considered as superior seismic performance for medium-rise rocking systems. Low-rise rocking systems could provide significant performance improvement over their conventional counterparts notwithstanding certain weaknesses in their seismic response.     

Evaluation of four supervised learning methods for groundwater spring potential mapping in Khalkhal region (Iran) using GIS-based features

One important tool for water resources management in arid and semi-arid areas is groundwater potential mapping. In this study, four data-mining models including K-nearest neighbor (KNN), linear discriminant analysis (LDA), multivariate adaptive regression splines (MARS), and quadric discriminant analysis (QDA) were used for groundwater potential mapping to get better and more accurate groundwater potential maps (GPMs). For this purpose, 14 groundwater influence factors were considered, such as altitude, slope angle, slope aspect, plan curvature, profile curvature, slope length, topographic wetness index (TWI), stream power index, distance from rivers, river density, distance from faults, fault density, land use, and lithology. From 842 springs in the study area, in the Khalkhal region of Iran, 70 % (589 springs) were considered for training and 30 % (253 springs) were used as a validation dataset. Then, KNN, LDA, MARS, and QDA models were applied in the R statistical software and the results were mapped as GPMs. Finally, the receiver operating characteristics (ROC) curve was implemented to evaluate the performance of the models. According to the results, the area under the curve of ROCs were calculated as 81.4, 80.5, 79.6, and 79.2 % for MARS, QDA, KNN, and LDA, respectively. So, it can be concluded that the performances of KNN and LDA were acceptable and the performances of MARS and QDA were excellent. Also, the results depicted high contribution of altitude, TWI, slope angle, and fault density, while plan curvature and land use were seen to be the least important factors.     

Effects of over-consolidation history on flow instability of clean and silty sands

Acta Geotechnica - This article presents an experimental program under the constant volume condition to investigate the influence of over-consolidation on flow instability of clean and silty sand...     

Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests

Geotechnical and Geological Engineering - Rock abrasivity index (RAI) and uniaxial compressive strength (UCS) are two key parameters for assessing abrasivity and durability of building stones,...     

A near-fault probabilistic seismic hazard assessment for Yasouj,located in the Kazerun fault system,southwest Iran

Natural Hazards - The Kazerun fault system (KFS) is located in the central part of the Zagros, the most seismically active orogenic belt in the Iranian plateau. The city of Yasouj is located in the...     

Analysis of soil nail walls performance - Case study

This study surveys the performance of temporary soil nail walls with a maximum height of 29.3 m in the Yas project, located in Tehran. Some numerical models, with various modelling approaches, were developed using finite element software and the proper modelling approaches were specified and verified.The modelling results were analysed and compared with the in situ monitored data. The results demonstrate the model’s horizontal deformations are generally greater than the in situ monitored values. To decrease the differences between models and monitored results, the effect of variations of the soil parameters had been surveyed and the limits of needed variations were specified.