A note on the problem of choosing a model of the Universe,IV

The Friedmannian model of the Universe with ultra-relativistic equation of statep=–1/3 withk=0 is nondecelerative, i.e., it expands with the constant velocityv=c during the whole expanding phase of evolution of the Universe. The ultrastable nondecelerative model is the only model of the Universe which fulfills all conditions resulting from the quantum-mechanical and relativistic analysis of the Universe.     

First U–Pb SHRIMP age of the Hauterivian stage, Neuquén Basin, Argentina

A high-resolution ion-microprobe (SHRIMP) U–Pb zircon age from a tuff layer intercalated in the ammonoid bearing sedimentary succession of the Neuquén Basin in Argentina provides a robust geochronologic date to add to the absolute ages and to improve the relative chronology of the Early Cretaceous Hauterivian stage. The tuff layer appears interbedded between shales of the upper member (Agua de la Mula) of the Agrio Formation within the Spitidiscus riccardii ammonoid zone (base of the Late Hauterivian) yielding a date of 132.5 ± 1.3 Ma. This date confirms and supports an accurate correlation between the ammonoid biostratigraphy of the Neuquén Basin with the Western Mediterranean Province of the Tethys during the Early Cretaceous and matches with the most recently published time scale. It also casts doubts on the validity of K–Ar ages on glauconite-grains recently reported from the Lower Cretaceous of the Vocontian Basin of France.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

A Functional Analysis of the Benthic Macrofauna of the São Sebastião Channel (Southeastern Brazil)

Abstract.  The major problem in coastal areas of developing countries is disturbance caused by anthropogenic influence. This disturbance can be quantified by analysing the distribution and composition of marine communities using uni- and multivariate techniques and the biotic index. A study of benthic macrofauna was carried out along the São Sebastião Channel, northern coast of São Paulo State, Brazil, in an area with a submarine outfall, a petroleum terminal and a commercial harbour. Sampling was undertaken seasonally, by means of a van Veen grab (0.1 m²) at 15 oceanographic stations, from November 1993 to August 1994. A total of 392 species were identified (129 Polychaeta, 127 Mollusca, 98 Crustacea, 28 Echinodermata and 10 other phyla). The sedimentary pattern recorded for the São Sebastião Channel is very heterogeneous, influenced mainly by strong wind-driven currents, and differs from nearby shelf areas. The study area could be divided into three regions based on sediment texture and fauna: one region dominated by medium and coarse sand with low values of organic carbon; a second area where pelitic fractions were dominant with high values of organic carbon and nitrogen; and a third region characterised by fine and very fine sand, presenting intermediate organic carbon values. No temporal significant variation in abundance and species composition was found, except in autumn. The use of the 'marine Biotic Coefficient' showed the same ecological trend as the faunal abundance and demonstrated that the central continental region of the channel is affected by human activities.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Some results of biogeographic research on meadows in the Dyje-Svratka basin in the Czech Republic

Some results of biogeographic research on meadows in the Dyje-Svratka basin in the Czech Republic. The paper shows one example of biogeographic inventory of natural ecosystems in an unflooded meadow in the Dyje-Svratka basin. It is part of the complex physio-geographic research of the Geographic Department of the Masaryk University in Brno aimed at gaining a basis for territorial interpretation of ecological regularities and territorial application of general ecological optimizing principles. A segment of biocenosis of Ulmi-fraxineta carpini has been analyzed (Zlatník 1956).The endeavour of Czech geographers to study geosystems of various dimensions completely gets in the limelight. In question is the understanding of mutual relationship of components of geosystems based on the exchange of mass and energy. There are two ways of studying them: spatial relations or approaches concentrated on processes. In contrast to the above unilateral concept, the endeavour to make the approaches compatible appears rarely. This complex view is made possible by geobiocenologically taken biogeography in papers of Zlatník and Rauer, their students and successors. This paper shows only one example of the results of biogeographic stock-taking of meadows in the Dyje-Svratka basin, indicating relations of eco- and geosystems which confirm the necessity of ecological orientation of the present biogeography and its potential contribution to ecology.     

Geochronology and geochemistry of eclogites from the Mariánské Lázně Complex,Czech Republic: Implications for Variscan orogenesis

The Mariánské Lázn complex (MLC) is located in the Bohemian Massif along the north-western margin of the Teplá-Barrandian microplate and consists of metagabbro, amphibolite and eclogite, with subordinate amounts of serpentinite, felsic gneiss and calcsilicate rocks. The MLC is interpreted as a metaophiolite complex that marks the suture zone between the Saxothuringian rocks to the north-west and the Teplá-Barrandian microplate to the south-east. Sm-Nd geochronology of garnet-omphacite pairs from two eclogite samples yields ages of 377±7, and 367±4 Ma. Samples of eclogite and amphibolite do not define a whole rock Sm-Nd isochron, even though there is a large range in Sm/Nd ratio, implying that the suite of samples may not be cogenetic. Eclogites do not have correlated _Nd values and initial ⁸⁷Sr/⁸⁶Sr ratios. Five of the eight eclogite samples have high _Nd values (+10.2 to +7.1) consistent with derivation from a MORB-like source, but variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7059) which probably reflect hydrothermal seawater alteration. Three other eclogite samples have lower _Nd values (+ 5.4 to –0.8) and widely variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7096). Such low _Nd values are inconsistent with derivation from a MORB, source and may reflect a subduction or oceanic island basalt component in their source. The MLC is an important petrotectonic element in the Bohemian Massif, providing evidence for Cambro-Ordovician formation of oceanic crust and interaction with seawater, Late Devonian (Frasnian-Famennian) high- and medium-pressure metamorphism related to closure of a Saxothuringian ocean basin, Early Carboniferous (Viséan) thrusting of the Teplá terrane over Saxothuringian rocks and Late Viséan extension.     

Dynamical instability in accreting white dwarfs

We study the evolution of solid, CO white dwarfs after explosive carbon ignition at central densities around 10¹⁰ g cm^–3 triggered by steady accretion in a close binary system, in order to elucidate whether these stars can collapse to form a neutron star. We show that as long as the velocity of the burning front remains below a critical value of 0.006c _s (60 km s^–1), gravitational collapse is the final fate. These calculations support the accretion-induced collapse (AIC) scenario for the origin of a fraction of low-mass X-ray binaries.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.