Proposed seismic hazard maps of Sumatra and Java islands and microzonation study of Jakarta city,Indonesia

This paper presents the development of spectral hazard maps for Sumatra and Java islands, Indonesia and microzonation study for Jakarta city. The purpose of this study is to propose a revision of the seismic hazard map in Indonesian Seismic Code SNI 03-1726-2002. Some improvements in seismic hazard analysis were implemented in the analysis by considering the recent seismic activities around Java and Sumatra. The seismic hazard analysis was carried out using 3-dimension (3-D) seismic source models (fault source model) using the latest research works regarding the tectonic setting of Sumatra and Java. Two hazard levels were analysed for representing 10% and 2% probability of exceedance (PE) in 50 years ground motions for Sumatra and Java. Peak ground acceleration contour maps for those two hazard levels and two additional macrozonation maps for 10% PE in 50 years were produced during this research. These two additional maps represent short period (0.2 s) and long-period (1.0 s) spectra values at the bedrock. Microzonation study is performed in order to obtain ground motion parameters such as acceleration, amplification factor and response spectra at the surface of Jakarta. The analyses were carried out using nonlinear approach. The results were used to develop contour of acceleration at the surface of Jakarta. Finally, the design response spectra for structural design purposes are proposed in this study.     

Dynamics of ship collisions

This paper described a procedure for simulation of the outer dynamics in ship collisions.The simulation procedure is derived using the transient equations for the horizontal motion of a ship. The hydrodynamic forces acting on the ships' hull during the collision are calculated by a strip method, where the forces acting on each section are described by means of unit response functions. These functions are determined by cosine transformation of the sectional dampings. The sectional added masses and dampings, and thereby also the sectional unit response functions, are calculated by an approximate method. The deformations of the slip structures during the collisions are modelled as non-linear springs.The resulting system of non-linear equations is solved using a numerical time-integration procedure.A number of different collision situations are simulated by means of the procedure.     

Diamondiferous eclogites from Yakutia,Siberia: evidence for a diversity of protoliths

Major-element and REE compositions of 14 diamondiferous eclogites from the Udachnaya kimberlite in Yakutia, Siberia have been determined by electron microprobe and secondary ion mass spectrometer (SIMS). Based on previous clinopyroxene classification schemes (e.g., Taylor and Neal 1989), all of these eclogite xenoliths belong to Group B/C, although some of the garnet compositions and mineral REE abundances are inconsistent with the indicated groups. This demonstrates the inadequacy of the classification scheme based on African eclogites for application to Siberian samples. Because of the coarse grain size of the Udachnaya nodules, meaningful modal abundances could not be obtained. However, reconstructed REE compositions using various garnet: clinopyroxene ratios demonstrate relative insensitivity to changes in mode for common eclogitic assemblages. Many of these reconstructed REE compositions show LREE depletions. Some depletions are consistent with an origin (either directly or through partial melting) as normal or Type-I ocean floor basalt. Others, however, require material of eclogitic or pyroxenitic affinities to undergo partial melting; this facilitates the depletion of LREE while leaving the HREE at nearly original levels. Many of the eclogites of South Africa are consistent with a protolith of anomalous or Type II ocean floor basalt. This fundamental difference between the two regions is the likely cause of the inconsistencies with the chemicallybased classification.     

Different response of δD values of n-alkanes, isoprenoids, and kerogen during thermal maturation

This study investigates the extent of post-depositional alteration of δD values of n-alkyl lipids, isoprenoids, and kerogen isolated from a continuous 450 m core that covers the transition from thermally immature to early mature sediments in the lacustrine Kissenda Formation, Lower Cretaceous, Gabon Basin. Large variations in δD values (up to 40‰ for nC₁₇ and up to 30‰ for nC₂₉ alkanes as well as up to 10‰ for kerogen) in closely spaced samples are evident throughout the core and remain preserved even at the bottom of the section. δD values of individual n-alkanes show a slight overall D-enrichment with depth, and a general trend of increasing δD values with increasing n-alkane chain length characterizes all samples, particularly in those below 600 m depth. Hydrogen isotopic compositions of kerogen samples overlap with those of n-alkanes throughout the section. δD values of pristane and phytane are more negative than those of nC₁₇ alkane by as much as 120‰ at shallow depths but increase dramatically and approach δD values of nC₁₇ alkane in the samples closest to the oil window. Integration of analytical and computational results indicates that: (1) n-alkanes and isoprenoids have the potential to preserve the original biological signal before the onset of oil generation; (2) isomeric and structural rearrangements taking place at the beginning stages of oil generation do not influence significantly the δD values of n-alkanes and kerogen. However, these processes have a major effect on the isotopic composition of isoprenoids, causing isotopic D-enrichment up to 90‰.     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

Greenhouse Gas Emissions and Costs over the Life Cycle of Wood and Alternative Flooring Materials

Increased use of wood can substitute more energy demanding products and thus contribute to a long-term solution to the global warming problem. The aim of this article is to provide an empirical study on this substitution impact, its cost-effectiveness, and which methodological assumptions that are of highest importance for the results obtained. We have made a case study where we compare use of various flooring materials. The results show that floor covering in solid oak causes lower greenhouse gas (GHG) emissions than the other materials. The difference can be ranked in the following order, after their potential for reduction in GHG emissions: Carpet in wool, carpet in polyamide, vinyl, and linoleum. At 2% pro anno discount rate, the avoided GHG emission in tons per m³ of oak flooring used is 0.1–1.9 for linoleum, and 11.8–15.5 for wool carpets. Unless the solution in solid oak is on total less expensive over the lifetime of the building, only the price of avoided emissions from a substitution between solid oak and carpet in wool is reasonable, compared to present carbon fees. The assumptions that influence the result most are choice of discount rate, carbon fixation on forest area, and waste handling. Empirical case studies like this indicate GHG emission reduction potentials caused by substitution, but should be complemented by dynamic input/output analyses and econometric studies. To analyse the flow of CO₂ over time, they should also be linked to forest management models.     

Shark interactions in pelagic longline fisheries

Substantial ecological, economic and social problems result from shark interactions in pelagic longline fisheries. Improved understanding of industry attitudes and practices towards shark interactions assists with managing these problems. Information on fisher knowledge and new strategies for shark avoidance may benefit sharks and fishers. A study of 12 pelagic longline fisheries from eight countries shows that incentives to avoid sharks vary along a continuum, based on whether sharks represent an economic disadvantage or advantage. Shark avoidance practices are limited, including avoiding certain areas, moving when shark interaction rates are high, using fish instead of squid for bait and deeper setting. Some conventionally employed fishing gear and methods used to target non-shark species contribute to shark avoidance. Shark repellents hold promise; more research and development is needed. Development of specifically designed equipment to discard sharks could improve shark post release survival prospects, reduce gear loss and improve crew safety. With expanding exploitation of sharks for fins and meat, improved data collection, monitoring and precautionary shark management measures are needed to ensure that shark fishing mortality levels are sustainable.