Green Lake Landslide and other giant and very large postglacial landslides in Fiordland,New Zealand

Green Lake Landslide is an ancient giant rock slide in gneiss and granodiorite located in the deeply glaciated Fiordland region of New Zealand. The landslide covers an area of 45 km² and has a volume of about 27 km³. It is believed to be New Zealand's largest landslide, and possibly the largest landslide of its type on Earth. It is one of 39 known very large (10⁶–10⁷ m³) and giant (≥10⁸ m³) postglacial landslides in Fiordland discussed in the paper. Green Lake Landslide resulted in the collapse of a 9 km segment of the southern Hunter Mountains. Slide debris moved up to 2.5 km laterally and 700 m vertically, and formed a landslide dam about 800 m high, impounding a lake about 11 km long that was eventually infilled with sediments. Geomorphic evidence supported by radiocarbon dating indicates that Green Lake Landslide probably occurred 12 000–13 000 years ago, near the end of the last (Otira) glaciation. The landslide is described, and its geomorphic significance, age, failure mechanism, cause, and relevance in the region are discussed, in relation to other large landslides and recent earthquake-induced landslides in Fiordland. The slope failure occurred on a low-angle fault zone undercut by glacial erosion, and was probably triggered by strong shaking (MM IX–X) associated with a large (≥ M 7.5–8) earthquake, on the Alpine Fault c. 80 km to the northwest. Geology was a major factor that controlled the style and size of Green Lake landslide, and in that respect it is significantly different from most other gigantic landslides. Future large earthquakes on the Alpine Fault in Fiordland are likely to trigger more very large and giant landslides across the region, causing ground damage and devastation on a scale that has not occurred during the last 160 years, with potentially disastrous effects on towns, tourist centres, roads, and infrastructure. The probability of such an event occurring within the next 50 years may be as high as 45%.     

Discrimination of sedimentary facies by association analysis

The ability of association analysis to discriminate sedimentary facies was tested on Purdy's modal analyses of modern sediments of the Great Bahama Bank. Purdy's data set has served in the past as a standard reference for evaluating various multivariate classification algorithms. In order to adapt Purdy's data to association analysis, the percent abundance of the 12 constituents was converted to binary form by dichotomizing each variable on its mean value. The results obtained by association analysis are virtually identical to those obtained by Purdy and other authors. The same four main sedimentary facies were discriminated; 86% of the samples were identically classified (97% when misclassified borderline cases are counted as matches); the total partition variance of the classification is only negligibly greater (4%); and the grouping of the variables yielded the same four groups. The rank order of the three division-attributes responsible for the sample classification is fines, oolites, and corals. Association analysis has been employed by other authors to differentiate meaningful facies groups in studies of ancient reef carbonates, modern reef sediments, and heavy minerals in stream sediments. In all these studies, the results were found to be compatible with those obtained by using the continuous quantitative measurements, indicating that qualitative binary data may often be sufficient for the purpose of facies discrimination in many branches of geology and that association analysis is an effective method for this purpose.     

An internal variable model for the creep of rocksalt

Summary The creep strain rate of rocksalt, like that of other ductile crystalline materials, can be described by a power law equation of the type ( ) ⁿ , where the active stress is the difference between the total deviatoric applied stress and an internal stress _i . In this paper, the origin and the nature of this internal stress, which develops during inelastic deformation of the material, are discussed. It is shown that this internal stress can serve as an internal (or state) variable in the constitutive model of rocksalt, which reflects the microstructure evolution of the material under the competitive action of hardening and recovery mechanisms.An analysis of experimental data, both our own and those taken from the literature, demonstrates that such a law is able to correctly reproduce rocksalt creep test results in the steady-state domain. The proposed model is in accordance with the macroscopic and microscopic behavior of salt, and with direct measurements of the internal stresses made by others on this material.     

The impact of shrimp trawling and associated sediment resuspension in mud dominated, shallow estuaries

To address the relative importance of shrimp trawling on seabed resuspension and bottom characteristics in shallow estuaries, a series of disturbance and monitoring experiments were conducted at a bay bottom mud site (2.5 m depth) in Galveston Bay, Texas in July 1998 and May 1999. Based on pre- and post-trawl sediment profiles of ⁷Be; pore water dissolved oxygen and sulfide concentration; and bulk sediment properties, it was estimated that the trawl rig, including the net, trawl doors, and “tickler chain,” excavate the seabed to a maximum depth of approximately 1.5 cm, with most areas displaying considerably less disturbance. Water column profile data in the turbid plume left by the trawl in these underconsolidated muds (85–90% porosity; <0.25 kPa undrained shear strength) demonstrate that suspended sediment inventories of up to 85–90 mg/cm² are produced immediately behind the trawl net; an order of magnitude higher than pre-trawl inventories and comparable to those observed during a 9–10 m/s wind event at the study site. Plume settling and dispersion caused suspended sediment inventories to return to pre-trawl values about 14 min after trawl passage in two separate experiments, indicating particles re-settle primarily as flocs before they can be widely dispersed by local currents. As a result of the passage of the trawl rig across the seabed, shear strength of the sediment surface showed no significant increase, suggesting that bed armoring is not taking place and the trawled areas will not show an increase in critical shear stress.     

Complexation of mercury by dissolved organic matter in surface waters of Galveston Bay, Texas

The chemical speciation of dissolved mercury in surface waters of Galveston Bay was determined using the concentrations of mercury-complexing ligands and conditional stability constants of mercury-ligand complexes. Two classes of natural ligands associated with dissolved organic matter were determined by a competitive ligand exchange-solvent solvent extraction (CLE-SSE) method: a strong class (L_s), ranging from 19 to 93 pM with an average conditional stability constant (K_HgLs) of 10²⁸, and a weak class (L_w) ranging from 1.4 to 9.8 nM with an average K_HgLs of 10²³. The range of conditional stability constants between mercury and natural ligands suggested that sulfides and thiolates are important binding sites for dissolved mercury in estuarine waters. A positive correlation between the estuarine distribution of dissolved glutathione and that of mercury-complexing ligands supported this suggestion. Thermodynamic equilibrium modeling using stability constants for HgL, HgCl_x, Hg(OH)_x, and HgCl(OH) and concentrations of each ligand demonstrated that almost all of the dissolved mercury (> 99%) in Galveston Bay was complexed by natural ligands associated with dissolved organic matter. The importance of low concentrations of high-affinity ligands that may originate in the biological system (i.e., glutathione and phytochelatin) suggests that the greater portion of bulk dissolved organic matter may not be important for mercury complexation in estuarine surface waters.     

Rapid orbit determination of LEO satellites using IGS clock and ephemeris products

Different types of GPS clock and orbit data provided by the International GPS Service (IGS) have been used to assess the accuracy of rapid orbit determination for satellites in low Earth orbit (LEO) using spaceborne GPS measurements. To avoid the need for reference measurements from ground-based reference receivers, the analysis is based on an undifferenced processing of GPS code and carrier-phase measurements. Special attention is therefore given to the quality of GPS clock data that directly affects the resulting orbit determination accuracy. Interpolation of clock data from the available 15 min grid points is identified as a limiting factor in the use of IGS ultra-rapid ephemerides. Despite this restriction, a 10-cm orbit determination accuracy can be obtained with these products data as demonstrated for the GRACE-B spacecraft during selected data arcs between 2002 and 2004. This performance may be compared with a 5-cm orbit determination accuracy achievable with IGS rapid and final products using 5 min clock samples. For improved accuracy, high-rate (30 s) clock solutions are recommended that are presently only available from individual IGS centers. Likewise, a reduced latency and more frequent updates of IGS ultra-rapid ephemerides are desirable to meet the requirements of upcoming satellite missions for near real-time and precise orbit determination.     

Issues of Globalization and Reflexivity in the Japanese Tourism Production System: The Case of Whistler,British Columbia

This article examines contemporary Japanese overseas tourism from a supplier‐side perspective using the concept of production systems. We first outline characteristics of the evolving structure of Japanese overseas tourism, with an emphasis on the global spread of Japanese travel companies. This provides a frame for presenting an empirical account of the transactional relationships in the Japanese package tour production system in Whistler, British Columbia, where Japanese tour operators play a pivotal role. We conclude that the recent expansion of Japanese travel companies is fostering the functional integration of the global tourism production system and exhibits increasing reflexivity.