Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.     

The effects of Population III stars on the chemical and photometrical evolution of ellipticals

We have studied the effects of a hypothetical initial generation containing very massive stars [   M > 100 M_⊙  , pair-creation supernovae] on the chemical and photometric evolution of elliptical galaxies. To this purpose, we have computed the evolution of a typical elliptical galaxy with luminous mass of the order of  10¹¹ M_⊙  and adopted chemical evolution models already tested to reproduce the main features of ellipticals. We have tested several sets of yields for very massive zero-metallicity stars: these stars should produce quite different amounts of heavy elements than lower-mass stars. We found that the effects of Population III stars on the chemical enrichment is negligible if only one or two generations of such stars occurred, whereas they produce quite different results from the standard models if they continuously formed for a period not shorter than 0.1 Gyr. In this case, the results are at variance with the main observational constraints of ellipticals such as the average  [〈α/ Fe〉_*]  ratio in stars and the integrated colours. Therefore, we conclude that if Population III stars ever existed they must have been present for a very short period of time and their effects on the following evolution of the parent galaxy must have been negligible. This effect is minimum if a more realistic model with initial infall of gas rather than the classic monolithic model is adopted. Ultimately, we conclude that there is no need to invoke a generation of very massive stars in ellipticals to explain their chemical and photometric properties.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Chemical evolution of Elliptical Galaxies and the ICM

We present a new model for the chemical evolution of elliptical galaxies taking into account SN feedback, detailed nucleosynthesis and galactic winds. We discuss the effect of galactic winds on the chemical enrichment of the ICM and compute the energy per particle injected by the galaxies into the ICM. This revised version was published online in August 2006 with corrections to the Cover Date.     

On the restricted three-body problem with generalized forces

By introducing general functions which depend on distance, a general scheme which determines the equilibrium solutions for the generalized restricted three-body problem is given. Applications to problems such as primaries considered as rigid bodies, influence of the radiation pressure of the primaries, and a combination of radiation pressure and rigid body are presented.     

Re-equilibration of detrital muscovite and the formation of interleaved phyllosilicate grains in low temperature metamorphism,northern Apennines,Italy

Low temperature metamorphosed clastic rocks of northern Apennines (Verrucano) contain detrital and metamorphic muscovite along with aggregates of interleaved phyllosilicate grains. The extent of celadonite substitution in the metamorphic muscovite progressively increases from Al-rich pyrophyllite-bearing samples to Al-poor K-feldspar-bearing samples and appears to be compatible with the phase relation in the AKF and AKNa diagrams. Some detrital muscovite grains, not equilibrated with the present metamorphic mineral assemblages, seem to be unreacted grains retaining their premetamorphic composition. The chemistry of the re-equilibrated detrital muscovite is mainly controlled by the activity of Al₂O₃ that is implied by mineral assemblages in the host rocks and is independent of the original composition of detrital mica. Four types of phyllosilicate associations in the interleaved phyllosilicate grains were recognized: 1) muscovite- pyrophyllite-sudoite; 2) muscovite-pyrophyllite-chlorite; 3) muscovite-paragonite-chlorite; 4) muscovite-chlorite. A microstructural and petrological model is proposed for the origin of interleaved phyllosilicate grains in the Verrucano rocks. The model supports the idea that the interleaved phyllosilicate grains are the result of the trend towards equilibrium between detrital muscovite, metamorphic mineral assemblages and the fluid phase.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

The use of principle component analyses in characterising trace and major elemental distribution in a 55 kyr peat deposit in tropical Australia: Implications to paleoclimate

The Lynch’s Crater peat deposit in NE-Australia is a sensitive environmental archive located in the tropical Southern Hemisphere. This unique deposit illustrates that local and regional changes had a profound effect on the local Australian ecosystem over the past 55 kyr. To obtain a proxy of past climate changes, trace and major element geochemistry analyses were applied to a 13 m peat core from the crater. Principle component analysis (PCA) was used to identify the main factors that control elemental distribution in the peat and to add interpretative strength to the geochemical behavior of selected major and trace elements. For example, Sc, Al, Cu, and Pb were found to be related to increased erosion of the basin soils, and from this, several periods of significant flux from atmospheric input and/or terrigenous run-off were identified. Geochemically mobile elements during rock weathering and pedogenesis, such as Mg, Ca, and Sr helped to identify the peat ombrotrophic-minerotrophic boundary at ∼1.5 m depth and offered important information about fluxes of these nutrients to the mire and their dynamics within the deposit. Arsenic and V comparisons between the peat record (high concentrations in some peat sections) and in local basin rocks (very low concentrations), suggested the presence of a long range, atmospheric dust source early in the formation of the mire. The Lynch’s Crater peat record presents a continuous record of environmental change in tropical Australia and contributes new understanding to geochemical processes in peatlands.