Temperature and Salinity Effects on Alkenone Ratios Measured in Surface Sediments from the Indian Ocean

We compare alkenone unsaturation ratios measured on recent sediments from the Indian Ocean (20°N–45°S) with modern sea oceanographic parameters. For each of the core sites we estimated average seasonal cycles of sea surface temperature (SST) and salinity, which we then weighted with the seasonal productivity cycle derived from chlorophyll satellite imagery. The unsaturation index (U₃₇^K′) ranges from 0.2 to 1 and correlates with water temperature but not with salinity. TheU₃₇^K′versus SST relationship for Indian Ocean sediments (U₃₇^K′= 0.033 SST + 0.05) is similar to what has been observed for core tops from the Pacific and Atlantic oceans and the Black Sea. A global compilation for core tops givesU₃₇^K′= 0.031 T + 0.084 (R= 0.98), which is close to a previously reported calibration based on particulate organic matter from the water column. For temperatures between 24° and 29°C, however, the slope seems to decrease to about 0.02U₃₇^K′unit/°C. For Indian Ocean core tops, the ratios of total C₃₇alkenones/total C₃₈alkenones and the slope of theU₃₇^K′-SST relationship are similar to those previously observed for cultures ofEmiliania huxleyibut different from those previously published forGephyrocapsa oceanica.EitherE. huxleyiis a major producer of alkenones in the Indian Ocean or strains ofG. oceanicaliving in the northern Indian Ocean behave differently from the one cultured. In contrast with coccolithophorid assemblages, the ratios of C₃₇alkenones to total C₃₈alkenones lack clear geographic pattern in the Indian Ocean.     

珠江三角洲世界工厂的非正规职业中介及其作用——以广东省东莞市塘厦镇为例

国内外现有研究认为,农民工的求职渠道非常单一,主要依赖社会关系网络。本文选取典型的珠江三角洲世界工厂所在地——广东省东莞市塘厦镇为案例,对非正规职业中介机构进行了深入调查研究。发现非正规中介机构在农民工的求职过程中发挥着重要作用,帮助农民工实现灵活、即时的就业,其存在是在我国转型期市场改革不断深入的背景下,企业/工厂的用工需求、农民工的求职需要、中介机构的逐利目的和地方政府的宽容态度共同作用的结果。非正规职业中介机构是市场动力作用下的新型农民工非正规求职渠道,是原有的社会关系网络求职渠道的延伸。研究表明,在现阶段中国城市化过程中,非正规的动力在解决农民工求职乃至城市化过程中具有重要的作用。     

Wind-Tunnel Simulation of the Wake of a Large Wind Turbine in a Stable Boundary Layer. Part 1: The Boundary-Layer Simulation

Measurements have been made in both a neutral and a stable boundary layer as part of an investigation of the wakes of wind turbines in an offshore environment, in the EnFlo stratified flow wind tunnel. The working section is long enough for the flow to have become very nearly invariant with streamwise distance. In order to be systematic, the flow profile generators of Irwin-type spires and surface roughness were the same for both neutral and stable conditions. Achieving the required profiles by adjusting the flow generators, even for neutral flow, is a highly iterative art, and the present results indicate that it will be no less iterative for a stable flow (as well as there being more conditions to meet), so this was not attempted in the present investigation. The stable-case flow conformed in most respects to Monin–Obukhov similarity in the surface layer. A linear temperature profile was applied at the working section inlet, resulting in a near-linear profile in the developed flow above the boundary layer and ‘strong’ imposed stability, while the condition at the surface was ‘weak’. Aerodynamic roughness length (mean velocity) was not affected by stability even though the roughness Reynolds number ${<}1$ , while the thermal roughness length was much smaller, as is to be expected. The neutral case was Reynolds-number independent, and by inference, the stable case was also Reynolds-number independent.     

Burial of redox-sensitive metals and organic matter in the equatorial Indian Ocean linked to precession

Authigenic metals (uranium, cadmium, and molybdenum), organic carbon (OC) and total C₃₇ alkenone (totC₃₇) concentrations were measured for the last 350 kyr in core MD900963, located in the eastern equatorial Arabian Sea. Authigenic metal concentrations on a carbonate-free basis range between 1 and 17 ppm, 0.5 and 6 ppm, and 0.5 and 4 ppm for U, Cd, and Mo, respectively. The profiles are characterized by well-defined 23 kyr cycles between oxic and mildly suboxic conditions. The redox-sensitive metal profiles also follow variations in the concentrations of OC (0.2-0.9%) and alkenones (0.2-6.7 ppm). The coupled variations in inorganic and organic constituents are attributed to a 23-kyr cycle in primary production above site MD900963, as suggested by clear correlations with independent micropaleontologic proxies (primary productivity indices based on foraminifera and coccoliths and fragmentation of foraminiferal shells). The 23-kyr cycles do appear to be primarily driven by productivity rather than changes in bottom water oxygen. Comparison with other records indicates that if this interpretation is correct, productivity variations across much of the Indian Ocean have been dominated by precessional forcing, with high productivity in phase with low summer insolation in the Northern Hemisphere. This interpretation contrasts with the traditional attribution of enhanced productivity in the Indian Ocean with periods of high summer insolation.     

The regional pressure impact of CO<Subscript>2</Subscript> storage: a showcase study from the North German Basin

A regional scale, showcase saline aquifer CO₂ storage model from the North German Basin is presented, predicting the regional pressure impact of a small industrial scale CO₂ storage operation on its surroundings. The intention of the model is to bridge the gap between generic and site-specific, studying the role of fluid flow boundary conditions and petrophysical parameters typically found in the North German Basin. The numerical simulation has been carried out using two different numerical simulators, whose results matched well. The most important system parameters proved to be the model’s hydrological boundary conditions, rock compressibility, and permeability. In open boundary aquifers, injection-induced overpressures dissipate back to hydrostatic level within a few years. If a geological flow barrier is present on at least one side of the aquifer, pressure dissipation is seriously retarded. In fully closed compartments, overpressures can never fully dissipate, but equilibrate to a compartment-wide remnant overpressure. At greater distances to the injection well, maximum fluid pressures are in the range of a few bar only, and reached several years to decades after the end of the actual injection period. This is important in terms of long-term safety and monitoring considerations. Regional pressure increase impacts the storage capacities of neighbouring sites within hydraulically connected units. It can be concluded that storage capacities may be seriously over- or underestimated when the focus is on a single individual storage site. It is thus necessary to assess the joint storage capacities and pressure limitations of potential sites within the same hydraulic unit.     

Structural evolution and strike-slip tectonics off north-western Sumatra

Based on new multi-channel seismic data, swath bathymetry, and sediment echosounder data we present a model for the interaction between strike-slip faulting and forearc basin evolution off north-western Sumatra between 2°N and 7°N. We examined seismic sequences and sea floor morphology of the Simeulue- and Aceh forearc basins and the adjacent outer arc high. We found that strike-slip faulting has controlled the forearc basin evolution since the Late Miocene. The Mentawai Fault Zone extends up to the north of Simeulue Island and was most probably connected farther northwards to the Sumatran Fault Zone until the end of the Miocene. Since then, this northern branch jumped westwards, initiating the West Andaman Fault in the Aceh area. The connection to the Mentawai Fault Zone is a left-hand step-over. In this transpressional setting the Tuba Ridge developed. We found a right-lateral strike-slip fault running from the conjunction of the West Andaman Fault and the Tuba Ridge in SSW-direction crossing the outer arc high. As a result, extrusion formed a marginal basin north of Simeulue Island which is tilted eastwards by uplift along a thrust fault in the west. The shift of strike-slip movement in the Aceh segment is accompanied by a relocation of the depocenter of the Aceh Basin to the northwest, forming one major Neogene unconformity. The Simeulue Basin bears two major Neogene unconformities, documenting that differences in subsidence evolution along the northern Sumatran margin are linked to both forearc-evolution related to subduction processes and to deformation along major strike-slip faults.     

Wind-tunnel Modelling of Dispersion from a Scalar Area Source in Urban-Like Roughness

A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ _p = λ _f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w _T /U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness.     

Determining sea level change in the German Bight

Regional mean sea level changes in the German Bight are considered. Index time series derived from 15 tide gauge records are analysed. Two different methods for constructing the index time series are used. The first method uses arithmetic means based on all available data for each time step. The second method uses empirical orthogonal functions. Both methods produce rather similar results for the time period 1924–2008. For this period, we estimate that regional mean sea level increased at rates between 1.64 and 1.74 mm/year with a 90% confidence range of 0.28 mm/year in each case. Before 1924, only data from a few tide gauges are available with the longest record in Cuxhaven ranging back till 1843. Data from these tide gauges, in particular from Cuxhaven, thus receive increasingly more weight when earlier years are considered. It is therefore analysed to what extent data from Cuxhaven are representative for the regional sea level changes in the German Bight. While this cannot be clarified before 1924, it is found that this is not the case from 1924 onwards when changes in Cuxhaven can be compared to that derived from a larger data set. Furthermore, decadal variability was found to be substantial with relatively high values towards the end of the analysis period. However, these values are not unusual when compared to earlier periods.