Crystalline basement and fold complex of the Volga-Ural, Pericaspian, and Fore-Caucasus petroliferous basins

3D models of apparent magnetization and density of rocks allow us to provide insights into the deep structure of the Volga-Ural, Pericaspian, and Fore-Caucasus petroliferous basins. In the Volga-Ural Basin, some Riphean rifts reveal close spatial relations to Paleoproterozoic linear zones, presumably of the rift nature as well. The structure of the Paleoproterozoic Toropets-Serdobsk Belt is interpreted in detail. Rocks with petrophysical properties inherent to basic volcanics are established in the pre-Paleozoic basement of the marginal zone of the Pericaspian Basin. These rocks locally spread beyond the boundary escarpment and may be regarded as a part of the Riphean plume-related basaltic province. It is shown that the Pericaspian Basin was formed on the place of a triple junction of Riphean rifts: the Sarpa and Central Pericaspian oceanic branches and the continental branch of the Pachelma Aulacogen. The drastically different petrophysical properties of the basement beneath Baltica and the Astrakhan Arch indicate that this arch is an element of the large terrane that was attached to Baltica in the Vendian. The suture along which the Astrachan Terrane is conjugated with the basement of the central and southern segments of the Karpinsky Ridge is traced beneath the Paleozoic complex. A system of northwest-verging thrust faults formed during the collision between Scythia and Eurasia is mapped in the basement of the junction zone between the Karpinsky Ridge and Scythian Platform (Terrane). According to geological data, this event took place in the Early Paleozoic.     

Using a Convection Model to Predict Altitudes of White Stork Migration Over Central Israel

Soaring migrants such as storks, pelicans and large birds of prey rely on thermal convection during migration. The convection model ALPTHERM was designed to predict the onset, strength, duration and depth of thermal convection for varying topographies for glider pilots, based on atmospheric conditions at midnight. We tested ALPTHERM predictions as configured for two topographies of central Israel, the Coastal Plains and the Judean and Samarian Mountains in order to predict altitudes of migrating white storks (Ciconia ciconia). Migrating flocks of white storks were tracked with a motorized glider, to measure maximum altitudes of migration during spring 2000. A significant positive correlation was found between the maximum daily altitudes of migration measured and the predicted upper boundary of thermal convection for the Coastal Plains and Samarian Mountains. Thirty-minute predictions for the Coastal Plains and Samarian Mountains correlated positively with measured maximum migration altitudes per thermal. ALPTHERM forecasts can be used to alter flight altitudes in both civil and especially military aviation and reduce the hazard of serious aircraft collisions with soaring migrants.     

Groundwater resources evaluation in calcareous limestone using geoelectrical and VLF-EM surveys (El Salloum Basin,Egypt)

Understanding and developing groundwater resources in arid regions such as El Salloum basin, along the northwestern coast of Egypt, remains a challenging issue. One-dimensional (1D) electrical sounding (ES), two-dimensional (2D) electrical resistivity imaging (ERI), and very low frequency electromagnetic (VLF-EM) measurements were used to investigate the hydrogeological framework of El Salloum basin with the aim of determining the potential for extraction of potable water. 1D resistivity sounding models were used to delineate geoelectric sections and water-bearing layers. 2D ERI highlighted decreases in resistivity with depth, attributed to clay-rich limestone combined with seawater intrusion towards the coast. A depth of investigation (DOI) index was used to constrain the information content of the images at depths up to 100 m. The VLF-EM survey identified likely faults/fractured zones across the study area. A combined analysis of the datasets of the 1D ES, 2D ERI, and VLF-EM methods identified potential zones of groundwater, the extent of seawater intrusion, and major hydrogeological structures (fracture zones) in El Salloum basin. The equivalent geologic layers suggest that the main aquifer in the basin is the fractured chalky limestone middle Miocene) south of the coastal plain of the study area. Sites likely to provide significant volumes of potable water were identified based on relatively high resistivity and thickness of laterally extensive layers. The most promising locations for drilling productive wells are in the south and southeastern parts of the region, where the potential for potable groundwater increases substantially.

     

Physical modeling of long-range infrasonic propagation in the atmosphere

The results of experiments on the physical modeling of long-range infrasonic propagation in the atmosphere are given. Such modeling is based on the possible coincidence between the forms of the vertical profiles of the effective sound speed stratification in the atmospheric boundary layer (between 0 and 600 m for the case under consideration) and in the atmosphere as a whole (from the land surface up to thermospheric heights (about 150 km)). The source of acoustic pulses was an oscillator of detonation type. Owing to the detonation of a gas mixture of air (or oxygen) and propane, this generator was capable of producing short, powerful (the maximum acoustic pressure was on the order of 30 to 60 Pa at a distance of 50 to 100 m from the oscillator), and sufficiently stable acoustic pulses with a spectral maximum at frequencies of 40 to 60 Hz and a pulsing period of 20 to 30 s. The sites of acoustic-signal recording were located at different distances (up to 6.5 km) from the source and in different azimuthal directions. The temperature and wind stratifications were monitored in real time during the experiments with an acoustic locator—a sodar—and a temperature profiler. The data on the physical modeling of long-range sound propagation in the atmosphere are analyzed to verify the physical and mathematical models of predicting acoustic fields in the inhomogeneous moving atmosphere on the basis of the parabolic equation and the method of normal waves. A satisfactory agreement between calculated and experimental data is obtained. One more task was to compare the theoretical relations between variations in the azimuths and angles of tilting of sound rays about the horizon and the parameters of anisotropic turbulence in the lower troposphere and stratosphere with the experimental data. A theoretical interpretation of the experimental results is proposed on the basis of the theory of anisotropic turbulence in the atmosphere. The theoretical and experimental results are compared, and a satisfactory agreement between these results is noted.     

The effect of Tschermak's substitution on assemblages in aluminous dolomites

A calculated petrogenetic grid for the system CaO-MgO-Al₂O₃-SiO₂-CO₂-H₂O (CaMASCH), incorporating Tschermak's substitutions in amphibole, chlorite, talc and clinopyroxene, is used to examine phase relationships in aluminous marbles. A series of diagrams illustrating the effect upon stable mineral assemblages of increasing the aluminium content of a bulk composition is used to show the way aluminous minerals enter mineral assemblages in progressively more aluminous rocks. The effects of changing pressure and the incorporation of Fe into the bulk composition on the stable mineral assemblages are also examined. The calculated equilibria are shown to be in reasonable agreement with natural assemblages, and the incorporation of new experimental data on amphiboles into the existing dataset is shown to improve the agreement between observed and natural amphibole compositions.     

Analysis of spatial relationships among geomorphic,petrographic and structural characteristics of the dartmoor tors

The granite tors of Dartmoor are characterized by using the regional spatial patterns of 21 geomorphic, petrographic, and structural variables. The data were derived from topographic maps, field measurement, and laboratory analysis of rock samples collected in the field. Identification of spatial patterns and comparison of patterns between variables were made on contour maps generated from the data using ARC/INFO. Three tor types—summit tors, valleyside tors, and spur tors—are semiquantitatively characterized using these data and procedures. The three types of tors are distinguished with respect to variations in relative relief, joint spacing and joint type, rock texture, grain size, and composition. Summit tors have the highest relative relief (mean: 125·7 m), contain the most potassium feldspar (>30 per cent), and have the most widely-spaced primary vertical (>300 cm) and secondary horizontal joints (> 10 cm). The rocks are the most megacrystic (> 15 per cent) and the coarsest grained. Plagioclase is also abundant in summit tors. Valleyside tors have the lowest relative relief (mean: 72·9 m) and the most widely-spaced horizontal joints (primary, 60-200 cm; secondary, > 10 cm). Grain size, vertical joint spacing, and quartz and potassium feldspar abundances are intermediate. The shapes of valleyside tors are controlled by horizontal joints and the rocks are either very feebly magcrystic or equigranular in texture. Spur tors have intermediate relative relief (mean: 115·4 m), the narrowest joint spacing (vertical joints, < 200 cm, 50-75 cm; horizontal joints <60 cm, < 10 cm) and the finest grain. In addition, the rocks are feebly magacrystic.     

Military geology of Antietam battlefield, Maryland, USA—geology, terrain, and casualties

The geology of a battlefield, or that which underlies the area in which a military campaign occurs, rarely truly affects the outcome of battle. Confederate General Robert E. Lee's Maryland campaign and the Battle of Antietam fought against Union General George B. McClellan in 1862 during the American Civil War, are however, major exceptions to this rule. Lee used the geology and structure of the area in choosing the invasion route, in a major delaying tactic prior to the battle, and in the battle itself. In this article, we show the affects of geology on the battle by using standard morphometric measures to quantify terrain variables and relate these data to the numbers of killed and wounded during the battle. We also include a field guide to various locations on the battlefield where the relations between geology, terrain, and casualties can easily be seen.