Capacity based design of pile foundations limits the soil-structure interaction mechanism to group bearing capacity estimation, neglecting, in most cases, the contribution of the raft. On the other hand, a straightforward, nonlinear, 3-D analysis, accounting for soil and structural nonlinearities and the effects arising from pile–soil–pile interaction, would be extremely high CPU-time demanding and will necessitate the use of exceptionally powerful numerical tools. With the aim of investigating the most efficient, precise, and economical design for a bridge foundation, a hybrid method, compatible with the notion of sub-structuring is proposed. It is based on both experimental data and nonlinear 3-D analysis. The first step to achieve these targets is a back-analysis of a static pile load test, fitting values for soil shear strength, deformation modulus, and shear strength mobilization at the soil–pile interface. Subsequently, the response of 2 × 2 and 3 × 3 pile group configurations is numerically established and the distribution of the applied load to the raft and the characteristic piles is discussed. Finally, a design strategy for an optimized design of pile raft foundations subjected to non-uniform vertical loading is proposed. 相似文献
Coastal imagery obtained from a coastal video monitoring station installed at Faro Beach, S. Portugal, was combined with topographic
data from 40 surveys to generate a total of 456 timestack images. The timestack images were processed in an open-access, freely
available graphical user interface (GUI) software, developed to extract and process time series of the cross-shore position
of the swash extrema. The generated dataset of 2% wave run-up exceedence values R2 was used to form empirical formulas, using as input typical hydrodynamic and coastal morphological parameters, generating
a best-fit case RMS error of 0.39 m. The R2 prediction capacity was improved when the shore-normal wind speed component and/or the tidal elevation ηtide were included in the parameterizations, further reducing the RMS errors to 0.364 m. Introducing the tidal level appeared
to allow a more accurate representation of the increased wave energy dissipation during low tides, while the negative trend
between R2 and the shore-normal wind speed component is probably related to the wind effect on wave breaking. The ratio of the infragravity-to-incident
frequency energy contributions to the total swash spectra was in general lower than the ones reported in the literature Einfra/Einci > 0.8, since low-frequency contributions at the steep, reflective Faro Beach become more significant mainly during storm
conditions. An additional parameterization for the total run-up elevation was derived considering only 222 measurements for
which ηtotal,2 exceeded 2 m above MSL and the best-fit case resulted in RMS error of 0.41 m. The equation was applied to predict overwash
along Faro Beach for four extreme storm scenarios and the predicted overwash beach sections, corresponded to a percentage
of the total length ranging from 36% to 75%. 相似文献
Foundation scour can have a detrimental effect on the performance of bridge piers, inducing a significant reduction of the lateral capacity of the footing and accumulation of permanent settlement and rotation. Although the hydraulic processes responsible for foundation scour are nowadays well known, predicting their mechanical consequences is still challenging. Indeed, its impact on the failure mechanisms developing around the foundation has not been fully investigated. In this paper, numerical simulations are performed to study the vertical and lateral response of a scoured bridge pier founded on a cylindrical caisson foundation embedded in a layer of dense sand. The sand stress–strain behaviour is reproduced by employing the Severn-Trent model. The constitutive model is firstly calibrated on a set of soil element tests, including drained and undrained monotonic triaxial tests and resonant column tests. The calibration procedure is implemented considering the stress and strain nonuniformities within the samples, by simulating the laboratory tests as boundary value problems. The numerical model is then validated against the results of centrifuge tests. The results of the simulations are in good agreement with the experimental results in terms of foundation capacity and settlement accumulation. Moreover, the model can predict the effects of local and general scour. The numerical analyses also highlight the impact of scouring on the failure mechanisms, revealing that the soil resistance depends on the hydraulic scenario.
Prespa Lake and Ohrid Lake constitute a hydraulic system shared between Albania, FYR of Macedonia and Greece. Karst rocks
separate both lakes. The elevation of Prespa Lake is about 150 m higher than that of Ohrid Lake. Considering these facts,
Cvijić formulated in 1906 the hypothesis that Prespa Lake recharges the St. Naum and Tushemisht springs at Ohrid lakeside.
Environmental isotopes demonstrated that Prespa Lake recharges about 37–42 and 52–54% of water emerging in St. Naum, and Tushemisht
springs, respectively. An artificial tracer experiment carried out in 2002 physically demonstrated the underground connection
between both lakes. This experiment confirmed the supposed underground connection and brought important information about
the groundwater velocity, transit time, and karst water conduits development. 相似文献
Ioannis Liritzis and Helen Vassiliou assess the evidence that the Ancient Greeks saw the aurora borealis, and that it was a rare and special event, strongly enough associated with particular gods to build temples of unusual orientation. 相似文献
In the present work, a model combination is developed in order to provide the public, in north-western Greece, with the next day air quality forecast. Generally, the development and deployment of a real-time numerical air quality prediction system is technically challenging while even more in complex terrain. The Air Pollution Model (TAPM) (http://www.cmar.csiro.au/research/tapm) is a hydrostatic prognostic mesoscale model. It has been calibrated for the area in recent studies and used in air quality assessments. In 2007, TAPM has started operating in a real-time operational mode for the prediction of next day’s weather forecast, particulate matter (PM10 with an aerodynamic diameter <10 μm) daily average concentration and Air Pollution Indexes. The model setup is a link up between TAPM and SKIRON modeling system (http://forecast.uoa.gr). 相似文献
Temperature changes are known to induce specific couplings in clay, in particular, an anomalously high thermal pressurization in undrained conditions or a thermal compaction in drained conditions, both of which are potential threats for the mechanical stability and sealing capacity of the geomaterials. Thermodynamical analysis of those peculiar thermomechanical couplings points to a potentially important latent energy, which in turn could limit the temperature change upon heating or cooling. The direct measurement of latent energy developed during a laboratory geomechanical test is challenging. Instead, proper identification of thermal hardening in conventional experiments with temperature changes provides an alternative route to estimate latent energy. In this work, existing laboratory thermomechanical tests of clays are analyzed with a rigorous thermodynamic framework to quantify the magnitude of latent energy in thermomechanically loaded clays. A thermodynamically consistent constitutive model for fully saturated clays that combines two key features, (a) the temperature dependence of the blocked energy and (b) the framework of bounding plasticity, is proposed. The performance of the model is validated by reproducing results obtained in laboratory tests for Boom and Opalinus clays. The thermomechanical loads considered to validate the model performance were then used to estimate the percentage of work that remains latent in the clayey material during plastic yielding. We find that the magnitude of latent energy is quite significant, typically a few tens of percent of the total dissipated energy, and increases significantly with temperature. Accordingly, it is expected to play an important role in the thermomechanical response of clays. 相似文献
This paper presents a macroelement formulation for the prediction of the planar dynamic response of inelastic deformable rocking bodies. The formulation is based on a previous macroelement developed by the authors able to describe the cyclic response of inelastic rocking bodies, which takes into account the deformability both along the height of the member, as well as near the rocking end. Modifications of this formulation to account for other motion modes of rocking members during their dynamic response, namely, sliding and upthrow, as well as modifications to account for damping in a uniform manner during the whole motion, including impacts, are introduced. The dynamic response predicted by the macroelement for free-standing rigid and deformable rocking bodies is presented and compared with existing theoretical solutions, and the effect of deformability, damping, inelasticity, and friction on the response is discussed. 相似文献
In this paper a recently developed multimode pushover procedure for the approximate estimation of structural performance of asymmetric in plan buildings under biaxial seismic excitation is evaluated. Its main idea is that the seismic response of an asymmetric multi-degree-of-freedom system with \(N\) degrees of freedom under biaxial excitation can be related to the responses of \(N\) ‘modal’ equivalent single-degree-of-freedom (E-SDOF) systems under uniaxial excitation. The steps of the proposed methodology are quite similar to those of the well-known modal pushover analysis. However, the establishment of the (E-SDOF) systems is based on a new concept, in order to take into account multidirectional seismic effects. The proposed methodology does not require independent analysis in the two orthogonal directions and therefore the application of simplified superposition rules for the combination of seismic component effects is avoided. After a brief outline of the theoretical background and the application process, an extensive evaluation study is presented, which shows that, in general, the proposed methodology provides a reasonable estimation for the vast majority of the calculated response parameters. 相似文献