Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

马面卵巢在不同贮藏温度下磷脂成分的变化

在20℃、4℃、-10℃、-20℃四种温度下贮藏马面卵巢，对其中磷脂含量的变化进行了测定，并利用薄层层析分析测定了不同温度下贮存3d后马面卵巢中磷脂各组分的相对百分比。结果表明马面卵巢中磷脂的损失率随贮藏温度的上升而增加；在不同温度下贮藏3d，磷脂各组分的相对百分比都发生了变化；随贮藏温度的升高磷脂酰胆碱的降解速度大大加快，所占的百分比快速下降，而溶血磷脂酰胆碱的比例有不同程度的增加。相对而言，-20℃下贮藏数天，磷脂的含量及组分的变化较小。     

Effective collision strengths with inclusion of resonance for hyperfine-structure transitions in H- and Li-like ions

Calculations are made of the resonance contribution to electron-impact excitation of H-like ¹³C and Li-like ²³Na, ²⁵Mg, ²⁷Al and ²⁹Si to the upper hyperfine levels that produce millimetre (mm) lines of likely astrophysical interest. The resonance contribution is found to be very important for these Li-like ions, considerably more important than for Li-like ⁵⁷Fe considered previously. However, resonances are found to be rather unimportant for H-like ¹³C. The effect of radiative decay on the resonance contribution is found to be insignificant in all of the present calculations.     

Force-free magnetic fields on curvilinear coordinate surfaces

To seek nonlinear solutions of force-free magnetic fields, some symmetries or approximations are usually invoked. We consider magnetic fields lying on coordinate surfaces of an orthogonal curvilinear coordinate system. We conclude that only fields on parallel planes or spherical shells can be expressed in the form provided by Low in 1980s. These force-free fields are stable against small perturbations with rigid boundaries. Fields on cylindrical shells are also considered.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

A note on the algorithm of symplectic integrators

For a Hamiltonian that can be separated into N+1(N\geq 2) integrable parts, four algorithms can be built for a symplectic integrator. This research compares these algorithms for the first and second order integrators. We found that they have similar local truncation errors represented by error Hamiltonian but rather different numerical stability. When the computation of the main part of the Hamiltonian, H ₀, is not expensive, we recommend to use S ^* type algorithm, which cuts the calculation of the H ₀ system into several small time steps as Malhotra(1991) did. As to the order of the N+1 parts in one step calculation, we found that from the large to small would get a slower error accumulation. This revised version was published online in July 2006 with corrections to the Cover Date.     

广西中三叠统浊流流向及坡向

通过对广西中三叠统浊积岩系中溢堤流沉积的识别,结合同一鲍马层序Tc段斜层理倾向与其底部槽模走向不一致的分析,以及横向冲刷模、U形障碍冲刷痕等冲蚀构造、大型滑动模等压刻构造的认识,筛选出宽阔水道充填沉积、扇状体及分支水道沉积中底模构造的指向数据,来指示浊流主体流向,并区分出溢堤流流向。从而确定了本区中三叠世时的浊流主体流向为NW向,平均为300°。根据滑塌沉积中滑塌包卷层轴面、滑塌面的测定,确定凤山县金牙处的古坡向平均为322°,与浊流主体流向基本一致。还认为中三叠世时右江盆地沉积物源来自桂东和桂东南蚀源区,海水由其南的越南境内进入。     

单片机在卫星天线控制系统中的应用

主要介绍卫星天线控制系统中天线旋转定位控制的软硬件设计和实现。该部分的主要功能是：接收红外遥控器的信号；检测前面板上的按键信号；检测传感器反馈的信号；根据所得信号作出相应的动作。