Problems in data compilation

Concepts involved in the estimation of target quantities and other adjustment parameters are critically discussd. We point out that one can find more accurate precepts for the reduction of data by utilizing all available constraints on all available data in the derivation of the reduction precepts. We introduce a measure for theefficiency of a set of adjustment parameters such that adjustments carried out using different precepts can be objectively compared. Finally, having applied our suggestions to a specific problem, we show that we have obtained estimates of a set of target quantities (in our case, star positions and proper motions) which have smaller formal errors than estimates of the same target quantities derived from the same input material but following traditional procedures.     

Shale basins,sulfur-deficient ore brines and the formation of exhalative base metal deposits

The massive sulfide deposits of the Iberian Pyrite Belt are interbedded with felsic volcanic rocks and shale, and underlain by several thousand meters of siliciclastic sedimentary rocks known as the PQ Group. Isotope geochemistry and regional geology are both consistent with equilibration of the ore-forming fluids with the PQ Group, prior to ore deposition near the former seafloor. The average Cu:Zn:Pb ratio of the PQ Group rocks (ca. 26:55:19) is similar to the weighted average of all the massive sulfide orebodies combined (ca. 25:52:23).The genetic relationship between massive sulfide deposits and a siliciclastic sedimentary metal source is explained here by a thermodynamic model, proposing that mildly reducing redox conditions imposed by equilibration with the sedimentary rocks are most critical for the formation of an effective ore-forming fluid. Relatively metal-rich but organic-poor pyrite-bearing shale undergoing dewatering of saline pore fluids is an effective source for the generation of sulfur-deficient but relatively iron and base metal-rich brines. Thus, we propose that the giant deposits of the Iberian Pyrite Belt owe their existence not to exceptionally metal-enriched (e.g., magmatic) fluids, but to the existence of a fairly ordinary but large metal source in reactive siliciclastic sediments, combined with an underlying igneous heat source and a particularly efficient mechanism of sulfide precipitation by mixing with H₂S-rich fluids at or near the seafloor.Essentially similar mineral equilibria are imposed when saline fluids are buffered by typical continental basement rocks. Leaching of retrograde minerals and possibly residual salts from their magmatic or metamorphic prehistory is expected to generate similar, variably metal-rich but relatively sulfide-deficient fluids. Thus, the existence of mildly reducing rocks can be the dominant chemical control in the source of fluids generating many volcanogenic, Irish-type or sedex deposits, many of which are known to precipitate their metal load in response to biogenic sulfide addition at the ore deposition site.     

Provenance of late Palaeozoic metasediments of the Patagonian proto-Pacific margin (southernmost Chile and Argentina)

In this provenance study of late Palaeozoic metasediments of the Eastern Andean Metamorphic Complex (EAMC) along the south Patagonian proto-Pacific margin of Gondwana, the palaeogeological setting of the continental margin in Devonian–Carboniferous and Permian times is reconstructed. The study is based on detrital heavy mineral contents, chemical compositions of tourmaline grains, and whole rock element and Nd-Sr isotopic compositions. Element and isotopic compositions reveal that Devonian–Carboniferous metaturbidites deposited before the development of a Late Carboniferous–Permian magmatic arc along the margin were mainly fed from felsic, recycled, old continental rocks. The last recycling phase involved erosion of metasediments that were exposed in Patagonia. Feeder systems to the basin cut either through epidote-rich or garnet-rich metasediments. In Permian time, EAMC metaturbidites were deposited next to the evolving magmatic arc and were derived from felsic, crustal rocks. Two provenance domains are recognised. The metasediments of the northern one are chemically similar to those of the Devonian–Carboniferous metasediments. This domain was fed from the metasedimentary host rocks of the magmatic arc. The southern domain probably was fed from the arc proper, as indicated mainly by the dominance of metaplutonic lithic fragments, abundant detrital biotite, and the major element composition of the metasediments.     

Generalized ‘dependencies’ and parameter variance

The autodependence, (a special case of the — now quite obsolete — dependences, which had been introduced for very specialized astrometric purposes) is proportional to the parameter variance which is the expectation of the variance of the systematic error of a function evaluated with estimated parameters.     

Chemical exchange during hydrothermal alteration of basalt by seawater—I. Experimental results for major and minor components of seawater

Fresh mid-ocean ridge basalt of varying crystallinity has been powdered and reacted with seawater and an artificial Na-K-Ca-Cl solution at 200–500°C and 500–1000 bar in sealed gold capsules. Water/rock mass ratios of 1–3 were used and durations ranged from 2 to 20 months.These time periods were sufficient for most elements to approach a steady-state concentration in solution which was determined by equilibrium with alteration minerals (Mg, SiO₂, SO₄), by rate of formation of these minerals (Na, Ca), or by depletion from the rock (K, B, Ba). The resulting solutions closely resemble the brines from the basalt-seawater geothermal system at Reykjanes, Iceland. Mg was almost completely removed from seawater into the alteration products smectite, tremolite-actinolite, or talc. Sulfate also was removed to low concentrations, both by precipitation of anyhydrite and by reduction to sulfide. Net transfer of Na from seawater into solids occurred in most experiments by formation of sodic feldspar and possibly analcime. Sr was removed from seawater in some experiments but showed no change or a small gain in others. SiO₂, Ca, K, Ba, B and CO₂ were leached from basalt and enriched in solution. SiO₂ concentrations were controlled by saturation with quartz at 300°C and above. The principal Ca-bearing phases which formed were anhydrite, the hydrated Ca-silicate truscottite, tremolite-actinolite, and possibly wairakite. No K-rich phases formed. For some minerals the crystallinity of the starting basalt affected the amount which formed.Removal of Mg from seawater into solid alteration products occurred rapidly and was balanced largely by leaching of Ca from basalt. Net transfer of Na from seawater into solids occurred more slowly and was balanced mainly by leaching of additional Ca from basalt. Thus, reaction between seawater and basalt at low water/rock ratios can be considered to consist of two exchanges: Mg for Ca, and Na for Ca.     

Provenance analysis and tectonic setting of the Ordovician clastic deposits in the southern Puna Basin, NW Argentina

Provenance studies on Early to Middle Ordovician clastic formations of the southern Puna basin in north-western Argentina indicate that the sedimentary detritus is generally composed of reworked crustal material. Tremadoc quartz-rich turbidites (Tolar Chico Formation, mean composition Q_t89 F7 L4) are followed by volcaniclastic rocks and greywackes (Tolillar Formation, mean Q_t33 F42 L25). These are in turn overlain by volcaniclastic deposits (mean Q_t24 F30 L46) of the Diablo Formation (late Arenig–early Llanvirn) that are intercalated by lava flows. All units were deformed in the Oclóyic Orogeny during the Middle and Late Ordovician. Sandstones of the Tolar Chico Formation are characterized by Th/Sc ratios > 1, La/Sc ratios ≈ 10, whereas associated fine-grained wackes show slightly lower values for both ratios. LREE (light rare earth elements) enrichment of the arenites is ≈ 50× chondrite, Eu/Eu* values are between 0·72 and 0·92, and flat HREE (heavy rare earth elements) patterns indicate a derivation from mostly felsic rocks of typical upper crustal composition. The ε_{Nd(t = sed)} values scatter around −11 to −9. The calculated Nd-T_DM residence ages vary between 1·8 and 2·0 Ga indicating contribution by a Palaeoproterozoic crustal component. The Th/Sc and La/Sc ratios of the Tolillar Formation are lower than those of the Tolar Chico Formation. Normalized REE (rare earth elements) patterns display a similar shape to PAAS (post-Archaean average Australian shale) but with higher abundances of HREEs. Eu/Eu* values range between 0·44 and 1·17, where the higher values reflect the abundance of plagioclase and feldspar-bearing volcanic lithoclasts. Average ε_{Nd(t = sed)} values are less negative at −5·1, and Nd-T_DM are lower at 1·6 Ga. This is consistent with characteristics of regional rocks of upper continental crust composition, which most probably represent the sources of the studied detritus. The rocks of the Diablo Formation have the lowest Th/Sc and La/Sc ratios, lower LREE abundances than the average continental crust and are slightly enriched in HREEs. Eu/Eu* values are between 0·63 and 1·17. The Nd isotopes (ε_{Nd(t = sed)} = −3 to −1; T_DM = 1·2 Ga) indicate that one source component was less fractionated than both the underlying Early Ordovician and the overlying Middle Ordovician units. Synsedimentary vulcanites in the Diablo Formation show the same isotopic composition. Our data indicate that the sedimentary detritus is generally composed of reworked crustal material, but that the Diablo Formation appears to contain ≈ 80% of a less fractionated component, derived from a contemporaneous continental volcanic arc. There are no data indicating an exotic detrital source or the accretion of an exotic block at this part of the Gondwana margin during the Ordovician.     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.