Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spectra of quasiperiodic oscillations of galactic X-ray sources–dynamical regimes from a simple model

We suggest that the dynamical regime(s) underlying quasi-periodic oscillations observed in the spectra of bright galactic-bulge X-ray sources are nonlinear with a mixed phase space. The important feature of such regimes is that they are generic among nonlinear Hamiltonian and nearly Hamiltonian systems of more than two degrees of freedom. We give a simple example of such chaotic (deterministic) systems whose spectra share a number of features with those observed for quasiperiodic oscillations of such sources.     

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.     

National ocean policy—new opportunities for Malaysian ocean development

Being a littoral state, Malaysian maritime sectors provide the basis for the growth and development of marine-related activities. As the country enters the new millennium along with the ‘2020 Vision’ which serves as the basic template against which the economic performance of these sectors should be judged, it poses a new challenge for Malaysia in developing these sectors. This paper attempts to address three basic issues: Firstly, is there any national ocean policy in place? Secondly, are the maritime sectors adequately organized to play an important role in achieving the objectives? Thirdly, what are the opportunities available in developing the ocean?It can be seen that existing policies to develop comprehensive ocean governance have not received the full attention they deserve. Organizational structures governing the ocean for implementing national policies are well in place but in a fragmented and uncoordinated fashion. As a result, sectoral and intersectoral management problems were created such as multiple-use conflicts, overlapping of jurisdiction and duplication of efforts. Environmental problems have also not been properly addressed. A few sectors have been identified as offering opportunities to further develop the Malaysian maritime areas. Among these are marine education and human resources development, marine tourism and the seafood industry.     

Finite-β effects on the radiative thermal instability in magnetized plasmas

The radiative thermal instability is investigated taking into account finite-, or electromagnetic, effects. The two-fluid model for magnetized plasmas together with the Maxwell equations are used to derive a general dispersion relation valid for compressional perturbations with frequency below the electron-cyclotron frequency. The growth rates of the radiative thermal instabilities involving fast magnetosonic flute-like and low-frequency hydromagnetic perturbations are presented.     

Analysis of red and infrared wide-band photometry of Algol

The basic physical picture of the Algol system is reviewed, and, using collected red and infrared observations, photometric curve fits are investigated by applying numerical quadratures to determine theoretical light curves appropriate to Roche model stars. The contact nature of Algol B appears to be confirmed, and effective temperatures of the three components areT _A=11 400°,T _B=5300°,T _C=7600°. In terms of a Lambert's law approach to the reflection effect, the effective heat-albedo is required to be reduced from unity to one half; and it is also found that the averaged gravity-darkening coefficient is close to a value appropriate for a diffusion type of heat-transfer mechanism operating in sub-photospheric layers.     

Economic analysis for the production of four grape cultivars using microcatchment water harvesting systems in Iran

An economic analysis was conducted for temporal yield variations of four local grape cultivars grown in rain-fed microcatchments in the Bajgah area of Fars province, in Islamic Republic of Iran. For this study, four local cultivars of grapes were considered. The cultivars examined were Black Rishbaba, Rotabi, Asgari and Black grapes. The soil type was a gravely loam with an average slope of 5–6%, in microcatchment systems, and in plots without microcatchments. Analysis of yield data with a multiple regression model indicated that a 9 m² (3×3 m) microcatchment area for each individual plant (vine) was the most appropriate area for vineyards in this region. The results also demonstrated that by using this area for each grapevine, yields (kg/ha) were 40% greater than yields obtained for vines in the standard vineyard (without microcatchments) in this area. Economic analysis was performed and the cost and income were compared for a depreciation period (life-span period) of 50 years and interest rate of 14%. The analysis showed that a microcatchment area of 9 m² is economically feasible. The Black Rishbaba rain-fed vines were the most suitable cultivar for this region. The benefit probabilities of rain-fed Black Rishbaba, Rotabi, Asgari and Black grapes with a microcatchment area of 9 m² and without such an area were 63.3% (i.e. two of 3 years), 52.4% (i.e. one of 2 years), 32.9% (i.e. one of 3 years), 13.3% (i.e. one of 8 years), and 59.5% (i.e. two of 3 years), 39.4% (i.e. two of 5 years), 31.8% (i.e. one of 3 years), and 10.7% (i.e. one of 9 years), respectively. Therefore, the Black Rishbaba and Rotabi cultivars are economically more stable in microcatchment system, while only the Black Rishbaba cultivar would be such in the standard vineyard system.     

Ionic conductivity in gem-quality single-crystal alkali feldspar from the Eifel: temperature,orientation and composition dependence

We measured the ion conductivity of single-crystal alkali feldspar originating from two different locations in the Eifel/Germany, named Volkesfeld and Rockeskyller sanidine and having potassium site fractions \(C_\mathrm{K}\) of 0.83 and 0.71, respectively. The dc conductivities resulting from electrochemical impedance spectroscopy over the temperature range of 300–900 \(^{\circ }\hbox {C}\) show a weak composition dependence but pronounced differences between the b-direction [\(\perp (010)\)] and \(c^{*}\)-direction [\(\perp (001)\)] of the monoclinic feldspar structure. Conductivity activation energies obtained from the observed linear Arrhenius plots are close to 1.2 eV in all cases, which is closely similar to the activation energies of the \(^{22}\mathrm{Na}\) tracer diffusivity in the same crystals. Taking into account literature data on K tracer diffusion and diffusion correlation effects, the present results point to a predominance of the interstitialcy mechanism over the vacancy mechanism in mass and charge transport on the alkali sublattice in potassium-rich alkali feldspar.     

Application of multivariate statistical methods to indicate the origin and geochemical behavior of potentially hazardous elements in sediment around the Sarcheshmeh copper mine,SE Iran

Multivariate statistical techniques, i.e., correlation coefficient analysis, principal components analysis (PCA), and hierarchical cluster analysis (CA), were applied to the total and water-soluble concentrations of potentially hazardous metals in sediments associated with the Sarcheshmeh mine, one of the largest Oligo-Miocene porphyry copper deposits in the world. The samples were analyzed for hazardous metal concentration levels by inductively coupled plasma mass spectrometry method. Results indicate that the contaminant metals As, Cd, Cu, Mo, S, Sb, Sn, Se, Pb, and Zn were positively correlated with the total concentrations. These hazardous metals also have strong association in the PCA and CA results. Different anthropic versus natural sources of contaminant metals were distinguished by using CA method. Water-soluble fraction of hazardous metals showed that the hydro-geochemical behavior of these metals in sediments is different considerably. Elements such as Cd, Co, Cr, Cu, Fe, Mn, Ni, S, and Zn are readily water soluble from contaminated samples, especially from evaporative mineral phases, while the release of As, Mo, Sb, and Pb into the water is limited by adsorption processes. Results obtained from the application of multivariate techniques on the water-soluble fraction data set show that the hazardous metals are categorized into three groups including (1) Ni, S, Co, Cu, Cr, and Fe; (2) Se, Mn, Cd, and Zn; and (3) Sb, As, Mo, and Sn. This classification describes the hydro-geochemical behavior of hazardous metals in water–sediment environments of the Sarcheshmeh porphyry copper mine and can be used as a basis in remedial and treatment strategies.     

Estimation of sediment load and erosion of different geological units: A case study from a basin of north-eastern Iran

Erosion of geological units and sediment load in rivers can be considered as the serious problems in recent decades.Increasing sediment loads generate major hazards for water resources development,particularly in terms of loss of reservoir storage due to sedimentation and siltation of water distribution systems.In this paper,the performance of four sediment rating curve (SRC) development methods was evaluated for the Shirin Darreh River(SDR) basin (1750 km2),located in North Khorasan Province,Iran.Data of flow discharge (Q) and suspended sediment flux (SSF)(Q-SSF pairs,N=957)and daily flow discharge,recorded by the Regional Water Company of North Khorasan (RWCNK) at the Qaleh-Barbar (QB) gauging site during 1989-2018were used.The flow discharge classification method performed best by meeting the desired criteria of most statistical indices,including normalized root mean square error (NRMSE),mean bias error (MBE),mean absolute error (MAE),index of agreement (d),and coefficient of determination (R~2).Based on the optimized method,the rate of suspended sediment transportation at the study site was estimated about2.7×10~6 ton year~(-1).Erodibility of the exposed formations in the study area was estimated based on a factorial scoring model (FSM).Three indices,focused on the outcrop and erodibility,were calculated for the geological units at sub-basin and total scales.Marl deposits are the most extensive geological unit in the three sub-basins and the maximum formation outcrop ratio (FOR) and participation in erosion (PCE)were obtained for these rocks at total scale.In fact,marl unit can be regarded as the main source to supply the suspended sediments in the study basin.