Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

The comparison between allozyme and RAPD makers for the population genetic structure analysis of scallop Chlamys farreri

1INTRODUCTION Since the first use in human genetic research in1966,allozyme has become the most popular genetic marker for population genetics studies for almost all groups of animals and plants(Lewontin and Hubby,1966;Murphy et al.,1996).In the past seve…     

Neutrino mass,luminosity variation,and spectrum of SN1987A

In this paper, the neutrino mass has been determined from SN1987a observation in a manner that the simultaneity of neutrino emission is not regarded as the starting point, but is itself defined through the analysis by Monte-Carlo simulation. The result is that the neutrino mass lies in 3–4 eV, possiblym _v 3.6 eV. Neutrino luminosity variation and neutrino spectrum are also obtained. Comparison with theories gives further support to the mass determination, and also predicts the mass of progenitor star of SN1987a to be in the range of 12–25M .The project supported by the National Natural Science Foundation of China.     

Triassic Nb-enriched basalts, magnesian andesites, and adakites of the Qiangtang terrane (Central Tibet): evidence for metasomatism by slab-derived melts in the mantle wedge

New chronological, geochemical, and isotopic data are reported for Triassic (219–236 Ma) adakite-magnesian andesite-Nb-enriched basaltic rock associations from the Tuotuohe area, central Qiangtang terrane. The adakites and magnesian andesites are characterized by high Sr/Y (25–45), La/Yb (14–42) and Na₂O/K₂O (12–49) ratios, high Al₂O₃ (15.34–18.28 wt%) and moderate to high Sr concentrations (220–498 ppm) and ε_ND (t) (+0.86 to +1.21) values. Low enrichments of Th, Rb relative to Nb, and subequal normalized Nb and La contents, and enrichments of light rare earth elements combine to distinguish a group of Nb-enriched basaltic rocks (NEBs). They have positive ε_ND (t) (+2.57 to +5.16) values. Positive correlations between Th, La and Nb and an absence of negative Nb anomalies on mantle normalized plots indicate the NEBs are products of a mantle source metasomatized by a slab melt rather than by hydrous fluids. A continuous compositional variation between adakites and magnesian andesites confirms slab melt interaction with mantle peridotite. The spatial association of the NEBs with adakites and magnesian andesites define an “adakitic metasomatic volcanic series” recognized in many demonstrably subduction-related environments (e.g., Mindanao arc, Philippines; Kamchatka arc, Russia; and southern Baja California arc, Mexico). The age of the Touhuohe suite, and its correlation with Triassic NEB to the north indicates that volcanism derived from subduction-modified mantle was abundant prior to 220 Ma in the central Qiangtang terrane.     

圆柱螺线法测斜计算中的数值方法

圆柱螺线法是井眼轨迹计算中最常使用的方法之一,在实钻轨迹监控、中靶分析和预测、井身质量评价等实际问题中都有重要的应用.但是当井段2个端点的井斜角之差或者方位角之差等于零时,圆柱螺线法坐标计算公式需要进行特殊处理才能正常计算;在井斜角之差或者方位角之差很小时,坐标计算会出现较大误差.对圆柱螺线法坐标计算公式进行了改进,用一组计算公式统一处理井斜角之差或者方位角之差等于零和不等于零的情况,提高了坐标的数值计算的精度和稳定性.对圆柱螺线型井眼轨迹的平均井眼曲率的数值计算进行了研究,提出了使用高斯型数值积分公式计     

基于AGA的SVM需水预测模型研究

需水预测是一个由城市人口、工业水平、社会经济水平共同作用的多因素、多层次的复杂非线性系统.其结果将直接影响受区域水资源承载力约束的产业结构、布局形态等决策.作为一种集中参数预报方法,支持向量机方法具有对未来样本的较好的泛化性能,对于这类资料缺乏、系统结构尚欠清晰的问题可以取得较好的模拟和预测结果.基于此,本文将支持向量机方法引入需水预测领域,建立了需水预测支持向量机模型.同时,本文将加速遗传算法和支持向量机方法耦合起来,构造了支持向量机模型参数的自适应优化算法.模型在珠海市的应用实例表明:与简单遗传算法比较,AGA的模型参数寻优效率更高;与BP神经网络模型相比,SVM模型较好地解决了小样本、经验性等问题,并取得了较高的预测精度.     

山东近海牙鲆(Paralichthys olivaceus)自然和养殖群体10个微卫星基因座位的遗传多态性分析

采用微卫星遗传标记技术对山东近海牙鲆自然群体和养殖群体的遗传多样性进行了研究。实验所用牙鲆于2003年5月分别采自山东近海和青岛胶南养鱼场，各20尾，取全血或肌肉组织，以酚-仿抽提方法提取基因组DNA，利用筛选获得的10对微卫星引物进行PCR扩增，反应产物经8％非变性聚丙烯酰胺凝胶电泳分离、EB显色，用ImageMasterl D Elite(Version 3．01)软件分析电泳结果，并计算了相应的遗传学参数。结果表明，在自然和养殖群体中，10个基因座位的等位基因平均数(α)分别为6．7和6．1，每个基因座位有效等位基因数(αe)分别为1．8—6．8和2．5—6．7，群体平均杂合度(H)分别为0．8120和0．7310；两个群体间的遗传相似性系数、遗传距离和基因分化系数为0．8558、0．1557和0．0558；自然群体内每个座位上的多态信息含量(PIC)为0．59—0．84、个体识别率(DP)为0．54—0．86、非父排除率(PPE)为0．41—0．72，其累积个体识别率和非父排除率均达到0．9999，表明所选座位属中高识别力的遗传标记，可以将它们应用于今后牙鲆雌核发育群体的遗传变异分析以及进一步的遗传育种的研究中。     

中太平洋铁锰结壳铅同位素研究

已有研究表明大洋中溶解的铅(Pb)来源于陆源物质，但是，对Pb进入大洋的途径争议很大。为此分析了取自中太平洋两块铁锰结壳样品的Pb同位素组成，获得了整个新生代的中太平洋Pb同位素演化历史。结果表明这两块结壳的Pb同位素随时间的演化曲线与中北太平洋沉积物岩心LL44-GPC3中风成碎屑的Pb同位素演化曲线相似。证实该区深水中的天然溶解铅主要来自风成粉尘，并且50Ma之前中太平洋中溶解Pb同位素组成主要取决于源自美洲的风成粉尘的输入，40Ma之后主要取决于源自亚洲的风成粉尘的输入。     

海洋沉积样品~(14)C测年差异来源及其结果解释

~(14)C测年已为海洋研究工作广泛应用,但由于时有不合理取样或在运用数据时没有充分考虑各种海洋环境和动力因素,因而产生无法使用数据作合理解释的现象。本文试从海洋样品本身和海洋各种营力作用分析各种数据差异的来源,认为海洋环境特别是海岸带环境的复杂性是造成海洋样品~(14)C测年数据差异的主要原因,它可能影响样品的代表性或使数据解释时得出错误结论.并指出在运用年代结果时一定要充分考虑地质地理和各种营力作用因素。     

烟单14号玉米产量与土壤养分关系的研究

根据大量田间试验和调查资料分析,作者提出烟单14号玉米生长过程中,小喇叭口期土壤中全氮、大喇叭口期土壤中速效磷的含量与产量相关密切。并据此建立了产量及构成三因素与土壤养分间的最优相关模型。