Scanning electron microscopy,cathodoluminescence, and Raman spectroscopy of experimentally shock‐metamorphosed quartzite

Abstract— We studied unshocked and experimentally (at 12, 25, and 28 GPa, with 25, 100, 450, and 750°C pre‐shock temperatures) shock‐metamorphosed Hospital Hill quartzite from South Africa using cathodoluminescence (CL) images and spectroscopy and Raman spectroscopy to document systematic pressure or temperature‐related effects that could be used in shock barometry. In general, CL images of all samples show CL‐bright luminescent patchy areas and bands in otherwise nonluminescent quartz, as well as CL‐dark irregular fractures. Fluid inclusions appear dominant in CL images of the 25 GPa sample shocked at 750°C and of the 28 GPa sample shocked at 450°C. Only the optical image of our 28 GPa sample shocked at 25°C exhibits distinct planar deformation features (PDFs). Cathodoluminescence spectra of unshocked and experimentally shocked samples show broad bands in the near‐ultraviolet range and the visible light range at all shock stages, indicating the presence of defect centers on, e.g., SiO₄ groups. No systematic change in the appearance of the CL images was obvious, but the CL spectra do show changes between the shock stages. The Raman spectra are characteristic for quartz in the unshocked and 12 GPa samples. In the 25 and 28 GPa samples, broad bands indicate the presence of glassy SiO₂, while high‐pressure polymorphs are not detected. Apparently, some of the CL and Raman spectral properties can be used in shock barometry.     

Infinitesimal orbits around lagrange points in the elliptic,restricted three-body problem

This study presents a method of obtaining asymptotic approximations for motions near a Lagrange point in the planar, elliptic, restricted three-body problem by using a von Zeipel-type method. The calculations are carried out for a second-order escape solution in the proximity of the equilateral Lagrange point, L ₄, where the primaries' orbital eccentricity is taken as the small parameter .     

Water pollution in gold mining industry: a case study in Roşia Montană district, Romania

The preliminary study of streams and rivers from the Roşia Montană area revealed that the concntration of heavy metals— Cd, Mn, Cu, Pb, and Zn—are above accepted limits. The gold extraction method is based on flotation. The most important pollution sources are mine tailings. The determinations were performed for samples collected in: April 2004, July 2004, September 2004, November 2004, February 2005 and May 2005. The highest concentrations were found for cadmium in September 2004: 0.17 mg/L; for copper in September 2004: 1.38 mg/L; for manganese in July 2004: 239.4 mg/L; for lead in May 2005: 0.54 mg/L; and for zinc in September 2004: 35.37 mg/L;. This study involved three small rivers (streams) that flow into the Mureş River and finally into the Danube River, having a great impact on human health and environmental stability in the area. In May 2005, a sample of drinking water from the mining district was also collected.     

Land-surface segmentation as a method to create strata for spatial sampling and its potential for digital soil mapping

Sampling efforts are constrained by limited availability of resources. Therefore, methods to reduce the number of samples, while still achieving reasonable accuracy are needed. Land-surface segmentation (LSS) has proven a powerful technique to partition digital elevation models (DEMs) and their derivatives into relatively homogeneous areas, which can be further employed as support in soil sampling. Though topography is one of the main soil forming factors, a robust assessment of the potential of this technique to digital soil mapping (DSM) is still missing. In this study, we aimed at evaluating the potential of LSS in stratifying a landscape into relatively homogeneous areas, which can be used as strata for guiding the selection of sampling points in DSM. The experiments were carried out in two study areas where soil samples were available. Land-surface derivatives were derived from DEMs and segmented with a tool based on the multiresolution segmentation algorithm, into objects considered as homogeneous soil-landscape divisions. Thus, one sample was randomly selected within each segment from the existing sample data, based on which predictions of soil classes/sub-orders and properties, i.e. soil texture and A-horizon thickness, were made. Results were compared with predictions based on simple random sampling (SRS) and conditioned Latin hypercube (cLHS). The segmentation-based sampling (SBS) scheme performed better than SRS and cLHS schemes in predicting the A-horizon thickness, soil texture fractions and soil classes, showing a high potential of LSS in stratifying a landscape for the purposes of DSM. The novelty of this study is in the way strata are constructed, rather than in the sampling design itself. Further research is needed to demonstrate the value of a SBS design for practical use. The analyses presented here further highlight the importance of considering locally adaptive techniques in optimization of sampling schemes and predictions of soil properties.     

Sulfide and platinum mineralization in the Merensky Reef: evidence from hydrous silicates and fluid inclusions

The base metal sulfides of the Merensky Reef are associated with hydrous silicates and intense deuteric hydrous alteration of cumulus and postcumulus silicates. Biotite and phlogopite crystallized in the vicinity of sulfides from a volatile-enriched highly fractionated intercumulus melt. Amphibole, chlorite, and talc are later alteration phases of cumulus pyroxene and intercumulus plagioclase. Biotite is often accompanied by zircon, rutile, and quartz. Accessory quartz hosts a complex suite of H₂O-NaCl-(CaCl₂)-CO₂-CH₄ fluid inclusions which have thus far not been described from the Merensky Reef. The earliest fluid inclusion compositions are NaCl-(H₂O) with less than 10 vol.% water; CO₂ coexisting with a halite daughter crystal and brine; and polyphase inclusions with up to six daughter and accidental phases and high contents of divalent cations. The maximum trapping temperature is around 730° C at 4 to 5 kb pressure. Later inclusion generations are H₂O-NaCl, CO₂-H₂O, and pure CO₂ and CH₄. The presence of Cl-rich fluids during the intercumulus stage of the crystallizing Merensky Reef is directly related to the mode of sulfide precipitation. Prior to sulfide unmixing in a hydrous magma sulfur is likely to be present as H₂S. Sulfur saturation causes reaction of H₂S with oxides of the silicate melt to form a sulfide melt plus water. During reaction the magma is enriched in water until a separate fluid unmixes. It carries all compounds with high fluid/melt partition coefficients, as well as metals capable of forming OH- and Cl-complexes. Precious metals are assumed to have fractionated into the Cl-rich fluid as Cl-complexes rather than being dissolved in the sulfide melt. During the cooling evolution of the fluid the precious elements precipitate around the periphery of sulfide melt droplets. The model proposed explains the distribution pattern of platinum-group minerals in the Merensky Reef better than any orthomagmatic mineralization concept offered so far.     

Anmerkungen zu „Geochemische Untersuchungen an Sedimenten des Persischen Golfs“

Ohne Zusammenfassung     

Biologische Untersuchung der Limmat zwischen Zürichsee und Wettingen, 1974 bis 1980

Biological investigations of that part of the River Limmat lying between Quaibrücke and Wettingen were carried out from 1974 to 1980. An influence of the waste water from the Werdhölzli sewage treatment plant on the plant and animal communities of the river bed was evident. This influence was especially plain to be seen immediately below the point of introduction of the waste water. The incidence of pollution indicators decreased downriver from this point. Biotests, using periphyton from stones taken from the shore of the Zürichsee, yielded harvests which were clearly higher in Limmat water taken from points downstream from the sewage works than in water taken from points upstream.     

Impact of the past mining activity in Roşia Montană (Romania) on soil and vegetation

The paper presents the results of a combined soil and vegetation survey in Ro?ia Montan? mining area (western Romania), famous for its gold and silver deposits, extensively exploited over the last 2,000 years. As the ore extraction has ceased in 2006 and new operations could be initiated in the future, the study contributes to the definition of the environmental baseline. Samples of topsoil and leaves of the tree species Betula pendula and Carpinus betulus have been collected from the inside and outside of the mining area, on a total surface of more than 60 km². The pH and heavy metal concentrations (Cd, Cr, Cu, Ni, Pb, and Zn) have been measured on 262 soils/sediments samples, revealing the predominantly acidic character of soils and the generally low contents of heavy metals. Stronger acidity and higher contents of heavy metals have been noticed in the proximity of the mining site, on the tailings and waste rock dumps, and along the streams with acid water. More than 100 leaf samples have been analysed for the same heavy metals as soils and also for chlorophyll fluorescence and pigment concentrations. B. pendula has shown a particular ability to concentrate Zn in leaves, at levels that may greatly exceed the Zn content in the corresponding soil samples. The correlation between the heavy metal contents in leaves and in soils, in most of the cases, is not very strong, presumably in relation to the low concentrations in soils. The chlorophyll concentration in leaves of B. pendula slightly diminishes on soils with low pH.