排序方式: 共有27条查询结果,搜索用时 15 毫秒
1.
Muyiwa Ebenezer Alalade Binod Kafle Frank Wuttke Tom Lahmer 《Geomechanics and Geoengineering》2018,13(2):146-157
Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort. 相似文献
2.
Time delay problem and its compensation in active control of civil engineering structures were studied. It has been shown by stability analysis of a SDOF system with time delayed feedback that the maximum allowable time delay depends not only on the natural period of the structure but also on feedback gains. We have demonstrated by numerical simulation that the performance of the control system degrades significantly when the time delay is close to this value and it even becomes unstable when time delay is greater than or equal to this value. The maximum allowable time delay decreases with decrease in natural period of the structure as well as with increase in active damping. The paper presents a technique for compensation by modelling time delay as transportation lag. This method ensures the stability of the controlled system as well as the desired response reduction. 相似文献
3.
4.
Spatio-temporal dynamics of heavy metals in sediments of the river estuarine system: Mahanadi basin (India) 总被引:1,自引:1,他引:0
Sanjay Kumar Sundaray Binod Bihari Nayak Byeong-Gweon Lee Dinabandhu Bhatta 《Environmental Earth Sciences》2014,71(4):1893-1909
Dynamics of heavy metals in the surface sediments of Mahanadi river estuarine system were studied for three different seasons. This study demonstrates that the relative abundance of these metals follows in the order of Fe > Mn > Zn > Pb > Cr > Ni ≥ Co > Cu > Cd. The spatial pattern of heavy metals supported by enrichment ratio data, suggests their anthropogenic sources possibly from various industrial wastes and municipal wastes as well as agricultural runoff. The metal concentrations in estuarine sediments are relatively higher than in the river due to adsorption/accumulation of metals on sediments during saline mixing, while there is a decreasing trend of heavy metal concentrations towards the marine side. The temporal variations for metals, such as Fe, Mn, Zn, Ni and Pb exhibit higher values during monsoon season, which are related to agricultural runoff. Higher elemental concentrations are observed during pre-monsoon season for these above metals (except Ni) at the polluted stations and for metals, such as Cr, Co and Cd at all sites, which demonstrate the intensity of anthropogenic contribution. R-mode factor analysis reveals that “Fe–Mn oxy hydroxide”, “organic matter”, “CaCO3”, and “textural variables” factors are the major controlling geochemical factors for the enrichment of heavy metals in river estuarine sediment and their seasonal variations, though their intensities were different for different seasons. The relationships among the stations are highlighted by cluster analysis, represented in dendrograms to categorize different contributing sites for the enrichment of heavy metals in the river estuarine system. 相似文献
5.
Soil–structure frictional resistance is required while designing foundation systems and retaining walls. Although much more attention has been paid in recent years regarding soil–structure interaction for dynamic loading, highly conservative values of the static frictional resistance between soil and structure are used in design. Not much emphasis has been given lately to evaluate static frictional resistance between soil and structure. In this study, a well graded sand, as per USCS classification system, was prepared in the laboratory at different relative densities and moisture contents i.e. dry and saturated, and frictional resistances of those soils were measured. Those soil samples were also sheared against wood, concrete, and steel blocks and corresponding soil–structure frictional resistances were measured. Moreover, similar experiments were performed for saturated and loose poorly graded sand (SP), silty sand (SM) and poorly graded sand with silt (SP–SM). The study result shows that the difference between frictional resistance of soil and skin friction depends on the type of soil, relative density and the moisture content. Interestingly, shear envelopes for soil–soil and soil–structure shearing resistance exhibited curvature. The traditionally adopted soil–structure frictional resistance values adopted by various geotechnical manuals were found to be highly conservative. 相似文献
6.
Tsering Karma Shrestha Manish Shakya Kiran Bajracharya Birendra Matin Mir Lozano Jorge Luis Sanchez Nelson Jim Wangchuk Tandin Parajuli Binod Bhuyan Md Arifuzzaman 《Natural Hazards》2022,110(3):1821-1845
Natural Hazards - The Hindu Kush Himalayan region is extremely susceptible to periodic monsoon floods. Early warning systems with the ability to predict floods in advance can benefit tens of... 相似文献
7.
Impacts of climate variability on water quality with best management practices in sub‐tropical climate of USA
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Efficiency of non‐point source pollution control methods may be altered in future climate. This study investigated climate change impacts on sediment and nutrient transport, and efficiency of best management practices (BMPs), in the Upper Pearl River Watershed (UPRW) in Mississippi. The Soil and Water Assessment Tool was applied to the UPRW using observed flow, sediment and nutrient data. Water quality samples were collected at three US geological survey gauging stations. The model was successfully calibrated and validated for daily time steps (Nash Sutcliffe efficiency and coefficient of determination – R2 up to 0.7) using manual and automatic (sequential uncertainty fitting version 2) methods from February 2010 to May 2011. Future weather scenarios were simulated using the LARS‐WG model, a stochastic weather generator, with Community Climate System Model, global climate model, which was developed by the National Center for Atmospheric Research in the USA. On the basis of the Special Report on Emissions Scenarios A1B, A2 and B1 of the Intergovernmental Panel on Climate Change, climate change scenarios were simulated for the mid (2046–2065) and late (2080–2099) century. Effectiveness of four BMPs (Riparian buffer, stream fencing, sub‐surface manure applications and vegetative filter strips) on reducing sediment and nutrient were evaluated in current and future climate conditions. Results show that sediment, nitrogen and phosphorus loadings will be increased up to a maximum of 26.3%, 7.3% and 14.3%, respectively, in future climate conditions. Furthermore, the effectiveness of BMPs on sediment removal will be reduced in future climate conditions, and the efficiency of nitrogen removal will be increased, whereas phosphorus removal efficiency will remain unchanged. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
The M w 7.8 2015 Gorkha earthquake and its aftershocks significantly impacted the lives and economy of Nepal. The consequences of landslides included fatalities, property losses, blockades of river flow, and damage to infrastructural systems. Co-seismic landslides triggered by this earthquake were significantly widespread and pose a major geodisaster. There were tens of thousands of landslides triggered by the earthquake, majority of which were distributed in between the epicenter of the main shock and the M w 7.3 aftershock. Although 14,670 landslides triggered by this earthquake were identified, only approximately 23% of them were of moderate to large scale with areas greater than 100 m2. Of the moderate- to large-scale landslides identified, just over 90% were triggered by the main shock and smaller aftershocks prior to the major (M w 7.3) aftershock, while nearly 10% were triggered by the ground shaking induced by the major aftershock. Moreover, the number of landslides triggered by the 2015 Gorkha earthquake, specifically by the main shock, was slightly more than the expected number of landslides for the recorded maximum peak ground acceleration (PGA) in comparison to the co-seismic landslides triggered by 26 earthquakes. Over 90% of those moderate- to large-scale landslides were concentrated within the estimated fault rupture surface. Majority of these moderate- to large-scale landslides were disrupted failures with over 96% of which were classified as earth falls. However, the majority of small-scale landslides were rock or boulder falls. The most number of moderate- to large-scale landslides were triggered in the slate, shale, siltstone, phyllite, and schist of the Lesser Himalayan formation followed by an equally significant number in both schist, gneiss, etc. of the Higher Himalayan formation and the phyllite, metasandstone, schist, etc. of the Lesser Himalayan formation. The sizes (i.e., areas) of the landslides were lognormally distributed, with a mode area of 322.0 m2. Slope inclinations of the moderate- to large-scale landslides followed a normal distribution with a mean slope inclination of 32.6° and standard deviation of 13.5°. There exists a strong correlation between the number of landslides and the peak ground acceleration within the study area, specific for different geological formations. 相似文献
9.
Nepal lies on the southern slope of Himalaya in Asia. In a width ranging between 150 and 250 km, the altitude varies greatly from about 100 m at its southern border to a maximum of 8848 min the northern part. Like the variation in altitude, climatic condition varies quite a lot. Long-term monthly mean erythemal UV daily dose values for Nepal are evaluated using Total Ozone Mapping Spectrometer (TOMS) estimation from the time of its overpass between 1996 and 2003. The results are presented as summer and winter maps of mean UV levels in each satellite grid. The mean winter erythemal UV daily dose ranges between 2.1 and 3.6 kJ m-2 whereas summer values are found to lie between 4.6 and 9.7 kJ m-2. The altitude variation increases the UV levels by about 0.2 kJ km-1 in winter months, and 0.9 kJ km-1 in summer. A multiyear monthly average erythemal daily dose in most of the areas shows that the summer value is about three times higher than that in winter. Although year-to-year variation is not pronounced in high- and mid-elevation regions, UV levels seemed to decrease from 1997 to 2002 in the southern part of the country in the low elevation region by about 5.35%. Due to the combined effects of the altitude, low ozone concentration in the troposphere, and thin air, surface UV radiation at higher altitudes is found to be higher than in the surrounding regions. 相似文献
10.
Triaxial shear testing of polished slickensided surfaces 总被引:1,自引:1,他引:0
Christopher L. Meehan Binod Tiwari Thomas L. Brandon J. Michael Duncan 《Landslides》2011,8(4):449-458
A series of consolidated-drained triaxial tests were performed on precut and polished clay specimens to measure their drained
residual strength. Two soils were tested during this research program: Rancho Solano Clay and San Francisco Bay Mud. Specimens
were tested using a specially modified triaxial compression device which was developed to minimize the effects of end-platen
restraint on the measured strengths. Special attention was paid to the influence of changing specimen area and membrane effects
during the test. Triaxial test results were compared with baseline measurements of drained residual shear strength that were
made for each of the clay soils using Bromhead ring shear tests and polished-specimen direct shear tests. Residual strength
values measured in the triaxial device were higher than the drained residual strengths measured in the Bromhead ring shear
apparatus and the direct shear device, indicating that this test approach is more challenging than the use of direct shear
tests conducted on polished slickensided surfaces. Comparison of single stage and multistage triaxial test data indicates
that multistage triaxial testing may work well for specimens that fail along a well-defined plane, provided that careful attention
is given to the effects of end platen restraint, membrane restraint, and changes in specimen area during shear. 相似文献