2-D deformation of two welded half-spaces due to a blind dip-slip fault

The solution of two-dimensional problem of an interface breaking long inclined dip-slip fault in two welded half-spaces is well known. The purpose of this note is to obtain the corresponding solution for a blind fault. The solution is valid for arbitrary values of the fault-depth and the dip angle. Graphs showing the variation of the displacement field with the distance from the fault, for different values of fault depth and dip angle are presented. Contour maps showing the stress field around a long dip-slip fault are also obtained     

Application of satellite infrared data for mapping of thermal plume contamination in coastal ecosystem of Korea

The 5900 MW Younggwang nuclear power station on the west coast of Korea discharges warm water affecting coastal ecology [KORDI report (2003). Wide area observation of the impact of the operation of Younggwang nuclear power plant 5 and 6, No. BSPI 319-00-1426-3, KORDI, Seoul, Korea]. Here the spatial and temporal characteristics of the thermal plume signature of warm water are reported from a time series (1985-2003) of space-borne, thermal infrared data from Landsat and National Oceanic and Atmospheric Administration (NOAA) satellites. Sea surface temperature (SST) were characterized using advanced very high resolution radiometer data from the NOAA satellites. These data demonstrated the general pattern and extension of the thermal plume signature in the Younggwang coastal areas. In contrast, the analysis of SST from thematic mapper data using the Landsat-5 and 7 satellites provided enhanced information about the plume shape, dimension and direction of dispersion in these waters. The thermal plume signature was detected from 70 to 100 km to the south of the discharge during the summer monsoon and 50 to 70 km to the northwest during the winter monsoon. The mean detected plume temperature was 28 degrees C in summer and 12 degrees C in winter. The DeltaT varied from 2 to 4 degrees C in winter and 2 degrees C in summer. These values are lower than the re-circulating water temperature (6-9 degrees C). In addition the temperature difference between tidal flats and offshore (SSTtidal flats - SSToffsore) was found to vary from 5.4 to 8.5 degrees C during the flood tides and 3.5 degrees C during the ebb tide. The data also suggest that water heated by direct solar radiation on the tidal flats during the flood tides might have been transported offshore during the ebb tide. Based on these results we suggest that there is an urgent need to protect the health of Younggwang coastal marine ecosystem from the severe thermal impact by the large quantity of warm water discharged from the Younggwang nuclear power plant.     

VRANCEA99—the crustal structure beneath the southeastern Carpathians and the Moesian Platform from a seismic refraction profile in Romania

The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.

The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.

Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle.     

Hydrologic characteristics of floods in Ganges–Brahmaputra–Meghna (GBM) delta

In the middle of 2007, a severe flood affected the People’s Republic of Bangladesh. This is a natural disaster that takes people’s lives, destroys livestock, infrastructures and communication systems and, damages crops and fish ponds. Despite many adverse impacts, the flood situation is an accepted phenomenon to the citizens of Bangladesh, due to the immense increase of soil fertility due to the flood, plus, the recharge of aquifer, ecosystem and fish. The flood of 2007 was the 5th major flood of the last 20 years when more than thirty-five percent of the area of the country was inundated with flood water. As in the past, the flood of 2007 had its own significance. The geography of the country contains a floodplain delta of three major river basins: the Ganges, the Brahmaputra and the Meghna (GBM). The mean monthly rainfall plot from the TRMM satellite data has shown that for both the Meghna and Brahmaputra basins, the rainfall was higher during July 2007 than any other months of the last 2 years. This excess rainfall had accumulated in the Brahmaputra and Meghna rivers and carried downstream to Bangladesh. This was the main cause of the flooding in 2007. The first crossing above the danger level of the river waters was observed at Durgapur station of the Someswari and at Sunamganj station of the Surma on the nineteenth of July, 2007 inside Bangladesh. In terms of magnitude of the peak and duration of the flood, the Brahmaputra was higher in 2007 than during 2004. However, the Ganges river water level never crossed the danger level during flood of 2007. The Meghna was lower during the flood peak for the duration of the flood in 2007. The year–to-year variability in both the magnitude and duration of the flood suggests changes in rainfall and landuse pattern of the catchment.     

Fast versus slow response in climate change: implications for the global hydrological cycle

Recent studies have shown that changes in global mean precipitation are larger for solar forcing than for CO₂ forcing of similar magnitude. In this paper, we use an atmospheric general circulation model to show that the differences originate from differing fast responses of the climate system. We estimate the adjusted radiative forcing and fast response using Hansen’s “fixed-SST forcing” method. Total climate system response is calculated using mixed layer simulations using the same model. Our analysis shows that the fast response is almost 40% of the total response for few key variables like precipitation and evaporation. We further demonstrate that the hydrologic sensitivity, defined as the change in global mean precipitation per unit warming, is the same for the two forcings when the fast responses are excluded from the definition of hydrologic sensitivity, suggesting that the slow response (feedback) of the hydrological cycle is independent of the forcing mechanism. Based on our results, we recommend that the fast and slow response be compared separately in multi-model intercomparisons to discover and understand robust responses in hydrologic cycle. The significance of this study to geoengineering is discussed.     

The effect of horizontal resolution on simulation of very extreme US precipitation events in a global atmosphere model

We investigate the ability of a global atmospheric general circulation model (AGCM) to reproduce observed 20 year return values of the annual maximum daily precipitation totals over the continental United States as a function of horizontal resolution. We find that at the high resolutions enabled by contemporary supercomputers, the AGCM can produce values of comparable magnitude to high quality observations. However, at the resolutions typical of the coupled general circulation models used in the Fourth Assessment Report of the Intergovernmental Panel on Climate Change, the precipitation return values are severely underestimated.     

地震岩问题

在过去的82年(1931—2013)中,共出现了39个成因术语。在这39个术语中,只有10个是真正沉积成因的(例如浊积岩),其他29个术语都是比较草率地提出的(just jargons;例如地震岩、海啸岩等)。“地震岩”(seismites)这一成因术语是赛拉赫(Seilacher,1969)提出的,它指沉积记录中的古地震。这是一个误用的(misnomer)术语。赛拉赫仅仅根据美国加利福尼亚州的中新统蒙特雷组(Miocene Montery Formation)10,m厚的露头观察,就匆忙地提出这个术语。他并未对这个露头进行认真的科学研究。最根本的问题是,地震是一个触动因素^①,并不是一个沉积作用。在古代的沉积记录中,鉴别不出各种触动因素(trigger)^②,因为自然界不能保留触动因素曾经存在过的证据。“软沉积物变形构造”(soft-sediment deformation structures,可简称为SSDS),通常被人们用来作为地震岩的鉴别标志,其实它是“液化作用”(liquefacation)的结果。液化作用可以由21种触动因素中的任何一种引起,其中包括地震(earthquake)、陨石冲击(meteorite impact)、海啸(tsunami)、沉积负载(sediment loading)等。在死海盆地中的角砾碎屑,所谓典型的由地震引起的沉积,实际上是常见的同沉积作用的碎屑流的产物,与地震没有关系。其他类型的SSDS,例如 “双向叠层构造”(duplex-like structures)和碎屑注入体(clastic injections),也可以说是同沉积作用的产物,与地震没有关系。世界上广泛分布的砂岩储油层,包括墨西哥湾、北海、挪威海、尼日利亚、赤道几内亚、加逢、孟加拉湾,都表明这些地区的SSDS的第一起因(primary cause)是沉积负载,其证据是可以观察到的和令人信服的。海啸及陨石冲击,都可以形成大量的沉积,例如SSDS的侧向延伸(lateral extent of SSDS),但这些沉积都不能当作地震的鉴别标志。位于印度东部大陆边缘的Krishna-Godavari(KG)盆地中的SSDS,是多种触动因素^①引起的沉积物的失控和液化作用的结果,即多成因的SSDS。由于这些原因,“地震岩”这个成因术语确实没有什么科学价值,应当废弃。     

Measurement of radon exhalation rate in various building materials and soil samples

Indoor radon is considered as one of the potential dangerous radioactive elements. Common building materials and soil are the major source of this radon gas in the indoor environment. In the present study, the measurement of radon exhalation rate in the soil and building material samples of Una and Hamirpur districts of Himachal Pradesh has been done with solid state alpha track detectors, LR-115 type-II plastic track detectors. The radon exhalation rate for the soil samples varies from 39.1 to 91.2 mBq kg^?1 h^?1 with a mean value 59.7 mBq kg^?1 h^?1. Also the radium concentration of the studied area is found and it varies from 30.6 to 51.9 Bq kg^?1 with a mean value 41.6 Bq kg^?1. The exhalation rate for the building material samples varies from 40.72 (sandstone) to 81.40 mBq kg^?1 h^?1 (granite) with a mean value of 59.94 mBq kg^?1 h^?1.