Particulate content of savanna fire emissions

As part of the FOS-DECAFE experiment at Lamto (Ivory Coast) in January 1991, various aerosol samples were collected at ground level near prescribed fires or under local background conditions, to characterize the emissions of particulate matter from the burning of savanna vegetation. This paper deals with total aerosol (TPM) and carbon measurements. Detailed trace element and polycyclic hydrocarbon data are discussed in other papers presented in this issue.Near the fire plumes, the aerosols from biomass burning are primarily of a carbonaceous nature (C%70% of the aerosol mass) and consist predominantly of submicron particles (more than 90% in mass.) They are characterized by their organic nature (black to total carbon ratio Cb/Ct in the range 3–20%) and their high potassium content (K/Cb0.6). These aerosols undergo aging during their first minutes in the atmosphere causing slight alterations in their size distribution and chemical composition. However, they remain enriched in potassium (K/Cb=0.21) and pyrene, a polycyclic aromatic hydrocarbon, such that both of these species may be used as tracers of savanna burning aerosols. We show that during this period of the year, the background atmosphere experiences severe pollution from both terrigenous sources and regional biomass burning (44% of the aerosol). Daynight variations of the background carbon concentrations suggest that fire ignition and spreading occur primarily during the day. Simultaneous TPM and CO₂ real-time measurements point to a temporal and spatial heterogeneity of the burning so that the ratio of the above background concentrations (TPM/CO₂) varies from 2 to 400 g/kg C. Smoldering processes are intense sources of particles but particulate emissions may also be important during the rapidly spreading heading fires in connection with the generation of heavy brown smoke. We propose emission factor values (EF) for aerosols from the savanna biomass burning aerosols: EF (TPM)=11.4±4.6 and 69±25 g/kg C_{dry plant} and EF(Ct)=7.4±3.4 and 56±16 g C/kg C_{dry plant} for flaming and smoldering processes respectively. In these estimates, the range of uncertainty is mostly due to the intra-fire variability. These values are significantly lower than those reported in the literature for the combustion of other types of vegetation. But due to the large amounts of vegetation biomass being burnt in African savannas, the annual flux of particulate carbon into the atmosphere is estimated to be of the order of 8 Tg C, which rivals particulate carbon emissions from anthropogenic activities in temperate regions.     

Interpretation of gamma-ray logs: The distribution of uranium in carbonate platform

High gamma-radioactivity in carbonates is usually ascribed to uranium of detrital minerals and organic matter, and to thorium and potassium of clays. The present study based on Urgonian marls and marly limestones (France) shows that some of the most radioactive values correspond instead to some ‘pure’ limestones. These peaks are generally associated with a sequence boundary or a maximum flooding surface. Low-level γ-spectrometry and ICP–MS analyses show that although high radioactivities are mostly associated with uranium, there is no obvious correlation between uranium enrichment and lithology. Also, correlation between high radioactivity and argillaceous beds might not be systematic. To cite this article: M.C. Raddadi et al., C. R. Geoscience 337 (2005).     

北京市地面沉降分布及典型灾害类型初探

地面沉降为北京主要次生地质灾害之一,近年来呈现快速发展趋势,对城市规划发展和经济建设的影响日趋明显。目前对于北京地面沉降灾害类型及特征认识较为局限,缺乏全面、系统认识。本文通过区域水准测量监测数据及以往调查资料的搜集整理,结合现场调查,阐明了北京地面沉降分布特征,总结归纳了地面沉降灾害类型及特征,发现区域性地面沉降形成的以井管抬升为代表的点状破坏现象,该类灾害以点为中心呈辐射状分布,影响范围较小。局部差异沉降形成包括墙体开裂、地表开裂及桥梁开裂等具有线状破坏形式的灾害,该类灾害多呈线性沿固定方向延伸,影响范围较大。     

Studying Resource-Dependent Communities Through a Social-Ecological Lens? Examining Complementarity with Existing Research Traditions in Canada

This article explores the suitability of Ostrom and colleagues' social-ecological systems framework (SESF) for the study of resource-dependent communities in Canada. Through a broad literature about resource-dependent communities in Canada, three main approaches are identified, named staples research, rural development, and sustainability studies. Each of these research traditions is analyzed with regards to a common set of criteria – focus, scale, methods, treatment of institutions, and treatment of environmental dimensions. Research in each category is compared and contrasted with the SESF approach, to identify areas of overlap and divergence. Results indicate that the SESF is unlikely to provide additional benefit in terms of in-depth of social analysis, however, it does provide a unique contribution in terms of its coupled approach to conceiving social and ecological systems and its ability to operationalize these relationships through structured variables.     

京津冀夏季强降水下冰云宏微观特征

根据Aqua MODIS 2级云产品和Cloudsat的2级产品资料,结合降水数据和MODIS L1B级辐射率数据,对发生在京津冀地区夏季的三次强降水过程中冰云的宏微观物理量的特征进行分析,并探究这些物理量和降水强度的关系。结果表明：在水平分布中,强降水过程中降水强度高值区内云相为冰云,冰云云顶高度在8~17 km,冰云粒子有效半径、冰云光学厚度、冰水路径分别最高可达60 μm、 150、 5 000 g?m^-2;冰云光学厚度、冰水路径、冰云云顶高度随降水强度增大而增大。在垂直分布中,冰云主要分布在3.5 km以上,发生强降水站点的冰云为深对流云,冰云粒子有效半径、冰水含量、冰云粒子数浓度分别最高可达150 μm、 3 000 mg?m^-3 、 500 L^-1;冰云粒子有效半径高值区存在于云层中下部,且随高度上升而减小,冰云粒子数浓度高值区存在于云层中上部,且随高度上升而增加,冰水含量高值区则存在于云层中部;冰云粒子有效半径、冰水含量、冰云粒子数浓度在9 km以上随降水强度增大而增大。     

Present limitations of accurate satellite Doppler positioning for tectonics. An example: Djibouti

One of the possibilities of the Doppler positioning from satellite is to provide geodetic measurements continuous in time without the need for reference stations. If measurements of sufficient accuracy can be achieved they may be used to study local surface displacements in relation to tectonic activity. A Doppler receiver of the MEDOC network is located near Djibouti in the Ghoubhat-Asal rift region which corresponds to the accreting plate boundary between the Arabian and African plates. In November 1978, a seismic and volcanic crisis occured in this area. Surface geodetic measurements and levellings performed in 1973 and 1978–79, just after the crisis, reveal a 60–80 cm sinking of the graben floor and a lateral extension of about 2 meters. Here we analyse Doppler measurements for the period January 1977 to November 1980. Point positions are computed for 7 to 10 day intervals using a precise ephemeris, and a moving window analysis is applied to the data. An apparent 2 meter uplift preceding the November 1978 seismic crisis is detected at Djibouti, whereas no similar phenomenon is observed at the two closest stations, Pretoria and Uccle-Brussels. However, field observations rule out a tectonic origin for this uplift. In Djibouti, the correlation between the apparent vertical station position and the electron density in the ionospheric F-layer reveals that a bias may be induced by the third order term of the ionospheric refractive index not previously taken into account, or more probably by the ray curvature through the ionosphere. This bias is particularly strong for our data set, from a station located close to the magnetic equator, and related to a period of rapid increase in the solar activity. Although our analysis fails to detect any tectonic displacement related to the rift seismic activity, it shows that similar tectonic studies by the Doppler method will be possible once the residual ionospheric errors are removed, for example by use of higher radio frequencies.     

Development and validation of a metallic haunch seismic retrofit solution for existing under‐designed RC frame buildings

The feasibility and efficiency of a seismic retrofit solution for existing reinforced concrete frame systems, designed before the introduction of modern seismic‐oriented design codes in the mid 1970s, is conceptually presented and experimentally investigated. A diagonal metallic haunch system is introduced at the beam–column connections to protect the joint panel zone from extensive damage and brittle shear mechanisms, while inverting the hierarchy of strength within the beam–column subassemblies and forming a plastic hinge in the beam. A complete step‐by‐step design procedure is suggested for the proposed retrofit strategy to achieve the desired reversal of strength hierarchy. Analytical formulations of the internal force flow at the beam–column‐joint level are derived for the retrofitted joints. The study is particularly focused on exterior beam–column joints, since it is recognized that they are the most vulnerable, due to their lack of a reliable joint shear transfer mechanism. Results from an experimental program carried out to validate the concept and the design procedure are also presented. The program consisted of quasi‐static cyclic tests on four exterior, ? scaled, beam–column joint subassemblies, typical of pre‐1970 construction practice using plain round bars with end‐hooks, with limited joint transverse reinforcement and detailed without capacity design considerations. The first (control specimen) emulated the as‐built connection while the three others incorporated the proposed retrofitted configurations. The experimental results demonstrated the effectiveness of the proposed solution for upgrading non‐seismically designed RC frames and also confirmed the applicability of the proposed design procedure and of the analytical derivations. Copyright © 2006 John Wiley & Sons, Ltd.