Regional gravity investigation of Honduras, Central America

A regional gravity study of Honduras was performed as part of a major study of the geothermal resource potential of Honduras. This study was conducted by Los Alamos National Laboratory, in cooperation with the Honduras government. Regional offshore free-air and onshore Bouguer gravity maps, and residual/isostatic gravity maps of Honduras and surrounding regions were produced. From these data several regional crustal and upper mantle models were produced. These models pass through two local geothermal sites, Platanares and San Ignacio. The regional geologic and tectonic implications of the models and their relevance to the geothermal potential of Honduras and to six well known geothermal sites in particular are examined. No obvious regional structures observed in the gravity data can explain the thermal enhancement in general or the specific geothermal sites. More local tectonic or structural conditions must control the distribution of the thermally enhanced areas.     

Geophysical investigations of the Platanares geothermal site, Honduras, Central America

Geophysical studies were carried out in Platanares in Western Honduras, as part of an investigation of the geothermal resource potential of Honduras by Los Alamos National Laboratory in cooperation with the Honduran government and the U.S. Geological Survey. Geological and geochemical studies later followed by exploratory bore-holes indicate this area of rugged topography has the best geothermal potential in Honduras. In order to better understand the geology of the area, gravity, audiomagnetotelluric and telluric surveys were carried out. The site is in a graben of Tertiary volcanics and Cretaceous red beds, with numerous hot springs along faults in the center of the graben. Gravity mapped the thickness of low-density tuffs and the position of associated normal faults. It also indicated the presence of persuasive, shallow, highly silicified, high-density tuffs and gravels. The electrical surveys mapped shallow, high-resistivity silicified zones and faults as low-resistivity zones. The red beds below the tuffs are considered to contain the geothermal reservoir, but their maximum thickness could not be determined by these surveys due to the lack of density contrast and the high surface electrical conductivities. Three geologic cross-sections constructed by others have been re-evaluated using gravity modeling and analysis of eletrical anomalies, showing general agreement but in detail significant differences.     

Characterization of the subsurface architecture and identification of potential groundwater paths in a clay-rich floodplain using multi-electrode resistivity imaging

The interaction between surface water and groundwater in clay-rich fluvial environments can be complex and is generally poorly understood. Airborne electromagnetic surveys are often used for characterizing regional groundwater systems, but they are constrained by the resolution of the method. A resistivity imaging survey has been carried out in the Macquarie Marshes (New South Wales, Australia) in combination with water chemical sampling. The results have enabled the identification of buried palaeochannels and the location of potential recharge points. The data have been compared with previously published airborne electromagnetic data in the same area. Deeper less conductive features suggest that there is a potential connection between the Great Artesian Basin and groundwater contained within the shallow sand aquifer. Even though the chemistry of the groundwater samples does not indicate interaction with the Great Artesian Basin, the observed discontinuity in the saprolite implies potential for this to happen in other locations.     

Tectono-sedimentary evolution of transverse extensional faults in a foreland basin: Response to changes in tectonic plate processes

Late Paleocene to Middle Eocene strata in the easternmost part of the Southern Pyrenees, up to 4 km thick, provide information on tectono-sedimentary evolution of faults transversal to the Pyrenean chain. To know how changes in tectonic plate processes control the structural evolution of transverse faults and the synchronous thickness and lithological distribution of sedimentary strata in a foreland basin, field observations, interpretation of 2D seismic lines tied to lithostratigraphic data of exploration wells and gravity modelling constrains were carried out. This resulted in the following two tectono-sedimentary phases in a foreland basin: first phase, dominated by transverse extensional faulting, synchronous with deposition of marine carbonates (ca. 57 to 51 Ma); and second phase, characterized by transverse contractional faulting, coeval to accumulation of marine and transitional siliciclastics (51 to 44 Ma). During the first phase, Iberia and Adria were moving to the east and west respectively. Therefore, lithospheric flexure in the easternmost part of the Iberian plate was developed due to that Sardinia was over-thrusting Iberia. Consequently, activation of E-dipping normal faults was generated giving rise to thick-deep and thin-shallow carbonate platform deposits across the hanging walls and footwalls of the transverse structures. During the second phase, a shearing interaction between Iberia and Sardinia prevailed re-activating the transverse faults as contractional structures generating thin-shelf and thick-submarine fan deposits across the hanging walls and footwalls of the transverse structures. In the transition between the first and second phases, evaporitic conditions dominated in the basin suggesting a tectonic control on basin marine restriction. The results of our study demonstrate how thickness and lithology distribution, controlled by transverse faulting in a compressional regimen, are influenced by phases related to processes affecting motions and interactions between tectonic plates and continental blocks.     

Vulnerability,pressures, and protection of karst caves and their speleothems in Ha Long Bay,Vietnam

This paper presents the results of morphological and microclimatic surveys and speleothem analyses of ten karst caves located in different isles in Ha Long Bay, a famous tourist attraction in Vietnam. Characteristically, the caves have enormous entrances, roomy interiors, but short length, typical of karst caves in tropical climates. The cave microclimate was found to be significantly dependent on the outside atmosphere and human activities. There was a clear spatial variation in macro features and fabrics of speleothems from entrance (porous, microcrystalline) to rear (solid, macrocrystalline) of the caves. Microstructure analysis with the use of an environmental scanning electron microscope shows a gradual decrease of biological activity and microclimate instability from outside to the innermost parts of the caves are the causes for this spatial variation. Past and present deterioration of caves and speleothems directly due to tourist activities and vandalism has been observed. On the other hand, there are signs of speleothem regrowth in the caves where tourism has been stopped. This study has proved that caves and their speleothems in Ha Long Bay are highly dynamic and understanding of their environment requires immediate methodological attention. Based on the analytical results, it is recommended that regulation of visitor frequency and removal of lamp-flora are necessary for sustainable development of the show caves and their speleothems.     

High precision symplectic integrators for the Solar System

Using a Newtonian model of the Solar System with all 8 planets, we perform extensive tests on various symplectic integrators of high orders, searching for the best splitting scheme for long term studies in the Solar System. These comparisons are made in Jacobi and heliocentric coordinates and the implementation of the algorithms is fully detailed for practical use. We conclude that high order integrators should be privileged, with a preference for the new $(10,6,4)$ method of Blanes et al. (2013).     

A snapshot of environmental iodine and selenium in La Pampa and San Juan provinces of Argentina

Soil and water samples were collected from farmsteads and provincial towns across the provinces of La Pampa and San Juan in Argentina. Inductively coupled plasma mass spectrometry was used for the determination of iodine in water following addition of TMAH to 1% v/v and soils extracted with 5% TMAH. Iodine in agricultural soils was in the range of 1.3–20.9 mg/kg in La Pampa located in central Argentina and 0.1–10.5 mg/kg in San Juan located in the northwest Andean region of Argentina, compared to a worldwide mean of 2.6 mg/kg. Mean selenium concentrations for soils from both provinces were 0.3 mg/kg, compared to a worldwide mean of 0.4 mg/kg. The majority of soils were slightly alkaline at pH 6.7 to 8.8. The organic content of soils in La Pampa was 2.5–5.9% and in San Juan 0.1–2.3%, whilst, mobile water extractable soil-iodine was 1–18% for La Pampa and 2–42% for San Juan. No simple relationship observed for pH and organic content, but mobile iodine (%) was highest when organic content was low, higher for lower total iodine concentrations and generally highest at pH > 7.5. Water drawn for drinking or irrigation of a variety of crops and pasture was found to range from 52 to 395 µg/L iodine and 0.8 to 21.3 µg/L selenium in La Pampa and 16–95 µg/L iodine and 0.6 to 8.2 µg/L selenium in San Juan. The water samples were all slightly alkaline between pH 8 and 10. Water–iodine concentrations were highest at pH 7.8 to 8.8 and in groundwaters positively correlated with conductivity. Raw water entering water treatment works in La Pampa was reduced in iodine content from approximately 50 µg/L in raw water to 1 µg/L in treated drinking water, similar to levels observed in regions experiencing iodine deficiency.     

A regional strategy for geothermal exploration with emphasis on gravity and magnetotellurics

As part of the resource evaluation and exploration program conducted by Los Alamos Scientific Laboratory for the national Hot Dry Rock (HDR) Geothermal Program, a regional magnetotelluric (MT) survey of New Mexico and Arizona is being performed. The MT lines are being located in areas where the results of analysis of residual gravity anomaly maps of Arizona and New Mexico, integrated with other geologic and geophysical studies indicate the greatest potential for HDR resources.The residual gravity anomalies are derived by applying the concept of predicting gravity anomalies from topography. This can be accomplished by employing reductions similar to those used in some isostatic investigations, in which a regional topographic surface is used as the Bouguer reduction datum. The datum is derived by comparison of various harmonics of Bouguer anomalies and elevations of stations. Topography can be used to predict Bouguer anomalies because of isostatic compensation; the resultant anomalies can be considered high frequency residual anomalies or isostatic anomalies corrected for regional compensation. Such maps have been produced for Arizona, New Mexico, west Texas, and Chihuahua, Mexico.The main objective of the MT project is to produce a regional geoelectric contour map of the pervasive deep electrical conductor within the crust and/or upper mantle beneath the Colorado Plateau and the adjacent Basin and Range Province and Rio Grande Rift. The MT survey consists of 200 sites along several long profiles with site spacing of 15–20 km. Pre-existing available MT data are being integrated with the new data. After the data are processed, a one-dimensional inversion is applied to the sounding curve and used as a starting point for 2-D modeling. Such a project and ultimate map will be of major value in studying the regional geophysics and tectonics of the southwest United States as they now apply to HDR resources in particular and geothermal resources in general.Electrical conductivity anomalies of large areal extent are of particular interest in geothermal exploration. Correlation analysis of large conductive anomalies with other geophysical, geological, and geotectonic data is being performed. Preliminary analysis of the data has suggested several major regions of anomalously shallow high electrical conductivity. Among these is the Aquarius area of northwest Arizona which is the site of a longwavelength residual anomaly low, which when modeled and correlated with other geophysical data can be shown to be possibly related to low density and high temperature in the crust at depths of 20 km or less. Preliminary analysis of MT data indicates the possible existence of a mid-crustal high electrical conductivity anomaly in this same region.     

Geoelectrical Classification of Gypsum Rocks

Gypsum rocks are widely exploited in the world as industrial minerals. The purity of the gypsum rocks (percentage in gypsum mineral in the whole rock) is a critical factor to evaluate the potential exploitability of a gypsum deposit. It is considered than purities higher than 80% in gypsum are required to be economically profitable. Gypsum deposits have been studied with geoelectrical methods; a direct relationship between the electrical resistivity values of the gypsum rocks and its lithological composition has been established, with the presence of lutites being the main controlling factor in the geoelectrical response of the deposit. This phenomenon has been quantified in the present study, by means of a combination of theoretical calculations, laboratory measurements and field data acquisition. Direct modelling has been performed; the data have been inverted to obtain the mean electrical resistivity of the models. The laboratory measurements have been obtained from artificial gypsum-clay mixture pills, and the electrical resistivity has been measured using a simple electrical circuit with direct current power supply. Finally, electrical resistivity tomography data have been acquired in different evaporite Tertiary basins located in North East Spain; the selected gypsum deposits have different gypsum compositions. The geoelectrical response of gypsum rocks has been determined by comparing the resistivity values obtained from theoretical models, laboratory tests and field examples. A geoelectrical classification of gypsum rocks defining three types of gypsum rocks has been elaborated: (a) Pure Gypsum Rocks (>75% of gypsum content), (b) Transitional Gypsum Rocks (75–55%), and (c) Lutites and Gypsum-rich Lutites (<55%). From the economic point of view, the Pure Gypsum Rocks, displaying a resistivity value of >800 ohm.m, can be exploited as industrial rocks. The methodology used could be applied in other geoelectrical rock studies, given that this relationship between the resistive particles embedded within a conductive matrix depends on the connectivity of the matrix particles.