The behaviour of 59Fe in marine microhabitat

Under the artificial condition the 59Fe morphology in sea water, its concentration in sediment and phytoplankton, its distribution and metabolism in tissue organs of marine animals were studied. The results showed that the morphology of 59Fe was in a particulate state in sea water. The adsorption rule of 59Fe by three kinds of sediments was similar. The concentration ability of 59Fe by phytoplankton was very strong. The critical concentration organs of S9Fe by marine animals were viscera. The gross radioactivity of 59Fe was mainly concentrated in protein. The concentration factor of 59Fe by DNA was the highest one. After excretion experiment, 59Fe of all the tissue organs was not detected. Small part of59Fe remained in the organic acid and protein state. There was a redistribution process in sediment for59Fe.     

The impact of several chemical poisons on the absorbing 45Ca by the Arca granosa

The impact of several chemical poisons on the Arca granosa absorbing 45Ca was studied. The results showed that the absorption of 45Ca in the blood and the soft tissue by Arca granosa was inhibited by the inorganic compounds of Cu, Zn, Pd, Cd, Hg and so on, among which the inhibition of Cd was the strongest, next was that of Cu and Hg. But the inhibition of the absorption of 45Ca in the shell of Arca granosa was little. The impact of three kinds of energy metabolism inhibitory substances on the absorption of 45Ca by the Area granosa showed that the absorption was an active transfer process.     

一类广义Hamilton系统的辛格式

通过引人泊松括号，分析了无限维Hamilton的性质，并将其推广到广义Hamilton系统，且从理论和实用角度讨论了这类广义Hamilton系统的辛格式构造问题，从而为辛几何算法在一般的时间发展方程的数值求解提供新的具体途径。     

MTCLIM模型系列研究报告(4):辐射估算方法在我国南方亚热带山地的改进

以已有的数据、理论和模型为基础,在我国南方亚热带山地对MTCLIM模型的辐射估算方法进行了改进,对模型参数作了重新估计。经过改进后,辐射子模型中的参数B的变化不再用月平均温差表示,而是用月平均水汽压来表示。交互验证估计参数的方法能消除不良数据的影响,获得较好的模拟效果,最后估计的参数T0 nadir.dry、α、C、a和b分别为0 823、0 000039、1 7、0 0173和0 0000122。与用原来参数估计的结果相比,参数估计后预测的日总辐射结果有明显改善,相关系数R2从原来的0 55～0 73提高到0 65～0 82,总平均绝对误差从原来的3 81MJ/m·d-1降低为2 90MJ/m·d-1,减少了约1MJ/m·d-1。     

An approach to determination of phenolic compounds in seawater using SPME-GC-MS based on SWCNTs coating

Phenolic compounds have become one kind of the important pollutants of the marine environment. Single-walled Carbon nanotubes, as one-dimensional nano materials, have light weight and perfect hexagonal structure of connections, with many unusual mechanical, chemical and electrical properties. In recent years, with the research of carbon nanotubes and other nano materials, the application prospect is also constantly discussed. In this paper, homemade single-walled carbon nanotubes(SWCNTs) coating was used for establishing an analytical approach to the determination of five kinds of phenolic compounds in seawater using SPME-GC-MS. Optimal conditions: After saturation was conducted with Na Cl, and p H was adjusted to 2.0 with H_2SO_4, the extract was immersed in a water bath at 40 for GC℃-MS determination through 40-min agitating extraction at 500 rmin~(-1) and 3-min desorption at 280℃. The liniearities ranged between 0.01-100 μg L~(-1), and the determination limits ranged between 1.5-10 ngL~(-1). The relative standard deviation(RSD, n = 5) was less than 6.5%. For the phenolic compounds obtained from the spiked recovery test for actual seawater samples, the rates of recovery were 87.5%-101.7%, and the RSDs were less than 8.8%, which met the requirements of determination. Due to its simplicity, high efficiency and low consumption, this approach is suitable for the analysis of trace amounts of phenolic compounds in marine waters.     

A Comparative Study of the Coal‐forming Characteristics of Marginal Sea Basins and Epicontinental Sea Basins

The coal-forming characteristics,as well as the similarities and differences between epicontinental sea basins and continental marginal sea basins developed during different time periods,were analyzed in this study by adopting comparative analysis thoughts and methods.The results obtained in this study revealed that epicontinental basins and marginal sea basins are both characterized by the main development of thin coal seams or extremely thin coal seams.In addition,changes in sea levels were determined to be the main controlling factors for coal formation,and there were similarities in the continent-sea interactions and coal-forming sedimentary systems of the different basins.However,there were also significant differences observed in the sea level change events,basin basement structural characteristics,coal seam stability levels,accumulation and aggregation characteristics,and the migration patterns of coal-forming materials.For example,the marginal sea basins in the South China Sea were found to be characterized by strong tectonic activities,diversity and complexity.The basin structures showed complex patterns of depressions,uplifts and concave or sag uplifts,which tended to lead to greater complexity in the paleogeographic patterns of the coal formations.This had subsequently resulted in complex coal-forming processes and paleogeographic characteristics,in which the coal-forming zones displayed bead-like distributions,and the enrichment areas and centers were scattered.The practical significance of studying the similarities and differences of the coal-forming characteristics between epicontinental basins and marginal sea basins is that the results can potentially be used to guide the predictions of coal-measure coal seam distributions in South China Sea,as well as provide valuable guidance for future explorations of natural gas reservoirs related to coal measures in the South China Sea area.     

Absorption of Arsenite on Several Iron （Hydro-）Oxides and Impact from Pre-processing Methods

The absorption reactions of arsenite on Fe （hydro-）oxides are studied. The three absorbent types are Fe（OH）3 gel and two Fe （hydro-）oxides, in which the Fe（OH）3 gel was dried in a microwave oven under vacuum at 80℃. It is found that pH changes from 9.71 to 10.36 in 6 minutes after the Fe （OH）3 gel was mixed with NaAsO2 solution, as the arsenite replaces the OH- in goethite and Fe（OH）3. At the 40th minute after the start of the reaction, pH decreases, which is most probably because that the monodentate surface complex of absorbed arsenite has changed into mononuclear-bidentate complex and released proton. The decline in pH values indicates not the end of the absorption but a change in the reaction type. Temperature and dissolved gas has little effect on these two types of reactions. The total absorption of arsenite increases after the absorbent is irradiated with ultrasound, which also lead to difficulty in separating the solids from solution. The absorption capacity for arsenite of Fe（OH）3 gel dried in a microwave oven under vacuum is 53.18% and 17.22% respectively better than that of Fe （OH）3 gel and gel dried at 80℃. The possible reasons are that the water molecules in the gel vibrates with high frequency under the effect of microwave irradiation, thereby producing higher porosity and improved surface activity.     

Erratum:"The Lyman-alpha Solar Telescope(LST)for the ASO-S mission—I.Scientific objectives and overview"(2019,RAA,19,158)

As a result of an error by the authors,in the paper"The Lyman-alpha Solar Telescope(LST)for the ASO-S Mission.I.Scientific Objectives and Overview"by Hui Li et al.(RAA 2019 Vol.19,No.11,158,doi:10.1088/1674C4527/19/11/158),there is an error occurred in Table 2 about the image size of SCI UV in the'Event'mode:the image size 4608×4608 should be replaced by 2048×2048.This correction is indicated in bold face in the following table.     

Seasonal variations in wave-induced stress over global ocean based on China France Oceanography Satellite

Due to the scarcity of simultaneous observations on global-scale wind and wave spectra, there has been limited research on the characteristics of global wave-induced stress and wind stress with wave effects using observed wave spectra, particularly their seasonal variations. The China France Oceanography Satellite(CFOSAT) for the first time can simultaneously observe global sea surface wind and wave spectra, providing a solid data basis for investigating this difficult issue. In this study, the ...     

Preliminary seismic anisotropy in the upper crust of the south segment of Xiaojiang faults and its tectonic implications

The Xiaojiang faults,striking north-to-south(NS),and the Honghe faults,striking north-to-west(NW),are first-order block boundaries that intersect to form a concentrated stress zone at an acute angle in the southern part of the Sichuan-Yunnan rhombic block(SYB).It is also a crucial zone for material escaping from the Tibetan Plateau(TP)due to the collision between the Indian Plate and the Eurasian Plate.In December 2017,the Institute of Earthquake Forecasting of the China Earthquake Administration(CEA)deployed a linear temporary seismic broadband array,the Honghe-Xiaojiang temporary Seismic Array(HX Array),across first-order block boundaries in the southern SYB.By using the waveform data of small earthquakes recorded by stations in the HX Array across Xiaojiang faults from 2017 to 2019,and by permanent seismic stations of the China National Earthquake Networks from 2012 to 2019,this paper adopts the systematic analysis method of shear-wave splitting(SWS),SAM method,to obtain preliminary results for seismic anisotropy in the upper crust.The study area can be divided into two subzones according to the spatial distribution of the directions of polarization of the fast shear-wave(PFS)at the stations:the northern zone(zone A,where the HX Array is located)and the southern zone(zone B,to the south of the HX Array).The results show that the directions of the PFS at stations in zone A were highly consistent,dominant in the NE direction,correlated with the in-situ principal compressive stress,and were seemingly unaffected by the Xiaojiang faults.The directions of the PFS as recorded at stations in zone B were more complicated,and were dominant in the NS direction parallel to that of the regional principal compressive stress.This suggests the joint influence of complex tectonics and regional stress in this narrow wedge area.By referring to the azimuthal anisotropy derived from seismic ambient noise in the southeast margin of the TP,the NS direction of the PFS in the middle and lower crust,and its EW direction in the upper mantle,this paper concludes that azimuthal anisotropy in the upper crust differed from that in the lower crust in the south segment of Xiaojiang faults,at least beneath the observation area,and azimuthal anisotropy in the crust was different from that in the upper mantle.The results support the pattern of deformation of ductile flow in the lower crust,and the decoupling between the upper and lower crusts as well as that between the crust and the mantle in the study area.The crustal directions of the PFS appeared to be independent of the Xiaojiang faults,suggesting that the influence of the South China block on the SYB passed through the Xiaojiang faults to the Yimen region.The results of this study indicate that anisotropic studies based on data on the dense temporary seismic array can yield clearer tectonic information,and reveal the complex spatial distribution of stress and deformation in the upper crust of the south segment of Xiaojiang faults.