Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

Force-free magnetic fields on curvilinear coordinate surfaces

To seek nonlinear solutions of force-free magnetic fields, some symmetries or approximations are usually invoked. We consider magnetic fields lying on coordinate surfaces of an orthogonal curvilinear coordinate system. We conclude that only fields on parallel planes or spherical shells can be expressed in the form provided by Low in 1980s. These force-free fields are stable against small perturbations with rigid boundaries. Fields on cylindrical shells are also considered.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

广西中三叠统浊流流向及坡向

通过对广西中三叠统浊积岩系中溢堤流沉积的识别,结合同一鲍马层序Tc段斜层理倾向与其底部槽模走向不一致的分析,以及横向冲刷模、U形障碍冲刷痕等冲蚀构造、大型滑动模等压刻构造的认识,筛选出宽阔水道充填沉积、扇状体及分支水道沉积中底模构造的指向数据,来指示浊流主体流向,并区分出溢堤流流向。从而确定了本区中三叠世时的浊流主体流向为NW向,平均为300°。根据滑塌沉积中滑塌包卷层轴面、滑塌面的测定,确定凤山县金牙处的古坡向平均为322°,与浊流主体流向基本一致。还认为中三叠世时右江盆地沉积物源来自桂东和桂东南蚀源区,海水由其南的越南境内进入。     

Triassic Nb-enriched basalts, magnesian andesites, and adakites of the Qiangtang terrane (Central Tibet): evidence for metasomatism by slab-derived melts in the mantle wedge

New chronological, geochemical, and isotopic data are reported for Triassic (219–236 Ma) adakite-magnesian andesite-Nb-enriched basaltic rock associations from the Tuotuohe area, central Qiangtang terrane. The adakites and magnesian andesites are characterized by high Sr/Y (25–45), La/Yb (14–42) and Na₂O/K₂O (12–49) ratios, high Al₂O₃ (15.34–18.28 wt%) and moderate to high Sr concentrations (220–498 ppm) and ε_ND (t) (+0.86 to +1.21) values. Low enrichments of Th, Rb relative to Nb, and subequal normalized Nb and La contents, and enrichments of light rare earth elements combine to distinguish a group of Nb-enriched basaltic rocks (NEBs). They have positive ε_ND (t) (+2.57 to +5.16) values. Positive correlations between Th, La and Nb and an absence of negative Nb anomalies on mantle normalized plots indicate the NEBs are products of a mantle source metasomatized by a slab melt rather than by hydrous fluids. A continuous compositional variation between adakites and magnesian andesites confirms slab melt interaction with mantle peridotite. The spatial association of the NEBs with adakites and magnesian andesites define an “adakitic metasomatic volcanic series” recognized in many demonstrably subduction-related environments (e.g., Mindanao arc, Philippines; Kamchatka arc, Russia; and southern Baja California arc, Mexico). The age of the Touhuohe suite, and its correlation with Triassic NEB to the north indicates that volcanism derived from subduction-modified mantle was abundant prior to 220 Ma in the central Qiangtang terrane.     

南黄海灾害性地质研究

本文研完了南黄海10种灾害地质因素的性质、危害性及分布,对其进行了分类,在此基础上对本区之灾害地质进行了区划和评价。     

Origin and evolution of alkali basaltic magma in the Okinawa Trough

I~IOXThe Okinawa Trough is an extending back--arc basin between the East China Sea Shelf andthe Ry'Ukyu Island Arc of Japan. There are widespreadly distributing acid pumice in the troughand a little basalt just in some area of the extending center. There have been some detailed rePOrtsabout the mineralogy and petrochemical feature of the subalkali tholeiite and alkali trachyte in thetrough (Zhai and Gan, 1995; Li et al., 1997; Qin and Zhai, 1988). This paper mainly reportselectron mic…     

关于波浪Boussinesq方程的研究

对有关波浪 Boussinesq方程的研究成果进行了系统的归纳总结和评述 ,以期对本学科的发展起到一定的引导和促进作用     

Combined refraction and diffraction models for sea waves over complicated topography and with currents in shallow water

-Combined refraction and diffraction models in the form of linear parabolic approximation are derived through smallparameter method. More strictly theoretical basis and more accuracy in the models than Lozano's (1980) are obtained. Some theoretical defects in Liu's model (1985) with consideration of current are not only found but also eliminated. More strict and accurate models are, therefore, presented in this paper.The calculation results and analysis in applying the models to actual wave field with consideration of bottom friction will be given in the following paper.