A method for sea surface wind field retrieval from SAR image mode data

To retrieve wind field from SAR images, the development for surface wind field retrieval from SAR images based on the improvement of new inversion model is present. Geophysical Model Functions(GMFs) have been widely applied for wind field retrieval from SAR images. Among them CMOD4 has a good performance under low and moderate wind conditions. Although CMOD5 is developed recently with a more fundamental basis, it has ambiguity of wind speed and a shape gradient of normalized radar cross section under low wind speed condition. This study proposes a method of wind field retrieval from SAR image by combining CMOD5 and CMOD4 Five VV-polarisation RADARSAT2 SAR images are implemented for validation and the retrieval results by a combination method(CMOD5 and CMOD4) together with CMOD4 GMF are compared with QuikSCAT wind data. The root-mean-square error(RMSE) of wind speed is 0.75 m s-1 with correlation coefficient 0.84 using the combination method and the RMSE of wind speed is 1.01 m s-1 with correlation coefficient 0.72 using CMOD4 GMF alone for those cases. The proposed method can be applied to SAR image for avoiding the internal defect in CMOD5 under low wind speed condition.     

多龄期钢框架时变损伤模型研究

对3种不同厚度的钢材标准试件进行酸性大气环境气雾加速腐蚀试验,并对锈蚀后的试件进行单向拉伸试验,得到钢材力学性能随失重率的衰变规律。同时考虑构件截面削弱与材料力学性能降低,建立不同锈蚀程度下的钢框架有限元分析模型,利用非线性静力推覆分析得到锈蚀钢框架结构的整体初始刚度随锈蚀程度增大的退化规律,以表征结构因锈蚀造成的损伤。提出同时反映最大变形效应和累积耗能效应的双参数结构整体地震损伤模型,并在此损伤模型的基础上集合钢材材性试验结果及有限元分析结果,提出适用于锈蚀钢结构的"时变"损伤模型。对比分析以层间位移角及时变损伤模型为性能指标建立的不同龄期钢框架结构的地震易损性曲线,结果表明:随着锈蚀程度的增加,在相同地震动强度下结构超越某一极限状态的失效概率均增大。     

利用一种改进的算法对中国高分三号同极化SAR图像反演的有效波高的验证

Chinese Gaofen-3(GF-3) is the first civilian satellite to carry C-band(5.3 GHz) synthetic aperture radar(SAR).During the period of August 2016 to December 2017, 1 523 GF-3 SAR images acquired in quad-polarization(vertical-vertical(VV), horizontal-horizontal(HH), vertical-horizontal(VH), and horizontal-vertical(HV)) mode were recorded, mostly around China's seas. In our previous study, the root mean square error(RMSE) of significant wave height(SWH) was found to be around 0.58 m when compared with retrieval results from a few GF-3 SAR images in co-polarization(VV and HH) with moored measurements by using an empirical algorithm CSAR_WAVE. We collected a number of sub-scenes from these 1 523 images in the co-polarization channel,which were collocated with wind and SWH data from the European Centre for Medium-Range Weather Forecasts(ECMWF) reanalysis field at a 0.125° grid. Through the collected dataset, an improved empirical wave retrieval algorithm for GF-3 SAR in co-polarization was tuned, herein denoted as CSAR_WAVE2. An additional 92 GF-3 SAR images were implemented in order to validate CSAR_WAVE2 against SWH from altimeter Jason-2, showing an about 0.52 m RMSE of SWH for co-polarization GF-3 SAR. Therefore, we conclude that the proposed empirical algorithm has a good performance for wave retrieval from GF-3 SAR images in co-polarization.     

Analysis of Wave Distributions Using the WAVEWATCH-Ⅲ Model in the Arctic Ocean

In this work, we examined long-term wave distributions using a third-generation numerical wave model called WAVE- WATCH-Ⅲ(WW3) (version 6.07). We also evaluated the influence of sea ice on wave simulation by using eight parametric switches. To select a suitable ice-wave parameterization, we validated the simulations from the WW3 model in March, May, September, and December 2017 against the measurements from the Jason-2 altimeter at latitudes of up to 60?N. Generally, all parameterizations ex-hibited slight differences, i.e., about 0.6 m root mean square error (RMSE) of significant wave height (SWH) in May and September and about 0.9 m RMSE for the freezing months of March and December. The comparison of the results with the SWH from the European Centre for Medium-Range Weather Forecasts for December 2017 indicated that switch IC4_M1 performed most effec-tively (0.68 m RMSE) at high latitudes (60?– 80?N). Given this finding, we analyzed the long-term wave distributions in 1999 – 2018 on the basis of switch IC4_M1. Although the seasonal variability of the simulated SWH was of two types, i.e., 'U' and 'sin' modes, our results proved that fetch expansion prompted the wave growth. Moreover, the interannual variability of the specific regions in the 'U' mode was found to be correlated with the decade variability of wind in the Arctic Ocean.     

海洋溢油溯源数值模拟方法的研究进展

海洋溢油溯源数值模拟可以为海上溢油事故的应急处置提供技术支撑,同时对确定溢油事故的泄漏源和责任方也具有重要的指导意义。本文概述了海洋溢油溯源数值模拟方法的最新研究成果,总结分析了包括对流扩散过程的逆运算、受体模式、粒子追踪模式和垂向溯源方法等在内的四类数值模拟方法的基础理论和研究进展。同时,归纳了三种常用的溢油溯源数值模拟结果分析方法,并给出了每种方法的优缺点及其对应的适用条件。在分析海洋溢油溯源数值模拟方法应用现状的基础上,初步探讨面临的挑战。这对全面理解溢油溯源数值模拟方法的理论和应用提供了重要参考,并可为相关工作和后续数值模拟方法的改进奠定基础。     

Analysis of the typhoon wave distribution simulated in WAVEWATCH- III model in the context of Kuroshio and wind-induced current

Journal of Oceanology and Limnology - To investigate the relationship between surface currents and wave distributions in typhoons, we took the Typhoon Talim in 2017 as a case, and found that the...     

使用参数化初猜测谱算法提取VV极化Sentinel-1 SAR图像的海浪要素并与ECMWF再分析数据以及浮标数据进行验证对比

The purpose is to study the accuracy of ocean wave parameters retrieved from C-band VV-polarization Sentinel-1Synthetic Aperture Radar(SAR) images, including both significant wave height(SWH) and mean wave period(MWP), which are both calculated from a SAR-derived wave spectrum. The wind direction from in situ buoys is used and then the wind speed is retrieved by using a new C-band geophysical model function(GMF) model,denoted as C-SARMOD. Continuously, an algorithm parameterized first-guess spectra method(PFSM) is employed to retrieve the SWH and the MWP by using the SAR-derived wind speed. Forty–five VV-polarization Sentinel-1 SAR images are collected, which cover the in situ buoys around US coastal waters. A total of 52 subscenes are selected from those images. The retrieval results are compared with the measurements from in situ buoys. The comparison performs good for a wind retrieval, showing a 1.6 m/s standard deviation(STD) of the wind speed, while a 0.54 m STD of the SWH and a 2.14 s STD of the MWP are exhibited with an acceptable error.Additional 50 images taken in China's seas were also implemented by using the algorithm PFSM, showing a 0.67 m STD of the SWH and a 2.21 s STD of the MWP compared with European Centre for Medium-range Weather Forecasts(ECMWF) reanalysis grids wave data. The results indicate that the algorithm PFSM works for the wave retrieval from VV-polarization Sentinel-1 SAR image through SAR-derived wind speed by using the new GMF C-SARMOD.     

Analysis of waves observed by synthetic aperture radar across ocean fronts

Ocean Dynamics - In this study, synthetic aperture radar (SAR) imaging of waves across ocean fronts was investigated using C-band Sentinel-1 VV-polarized SAR imagery collected over the Yangtze and...     

Evaluation of Typhoon Waves Simulated by Wave Watch-Ⅲ Model in Shallow Waters Around Zhoushan Islands

In this study, we simulated typhoon waves in the shallow waters around the Zhoushan Islands using the WaveWatch-Ⅲ(WW3) model version 5.16, the latest version released by the National Oceanic and Atmospheric Administration. Specifically, we used in-situ measurements to evaluate the performance of seven packages of input/dissipation source terms in the WW3 model. We forced the WW3 model by wind fields derived from a combination of the parametric Holland model and high-resolution European Center for Medium-Range Weather Forecasts(ECMWF) wind data in a 0.125? grid, herein called H-E winds. We trained the H-E winds by fitting a shape parameter B to buoy-measured observations, which resulted in a smallest root mean square error(RMSE) of 3 m s^-1 for B, when treated as a constant 0.4. Then, we applied the seven input/dissipation terms of WW3, labelled ST1, ST2, ST2+STAB2, ST3, ST3+STAB3, ST4, and ST6, to simulate the significant wave height(SWH) up to 5 m during typhoons Fungwong and Chan-hom around the Zhoushan Islands. We then compared the SWHs of the simulated waves with those measured by the in-situ buoys. The results indicate that the simulation using ST2 performs best with an RMSE of 0.79 m for typhoon Fung-wong and an RMSE of 1.12 m for typhoon Chan-hom. Interestingly, we found the simulated SWH results to be relatively higher than those of the observations in the area between Hangzhou Bay and the Zhoushan Islands. This behavior is worthy of further investigation in the future.     

台风中降雨对中国高分3号合成孔径雷达观测信号的影响

Gaofen-3(GF-3), a Chinese civil synthetic aperture radar(SAR) at C-band, has operated since August 2016.Remarkably, several typhoons have been captured by GF-3 around the China Seas over its last two-year mission.In this study, six images acquired in Global Observation(GLO) and Wide ScanSAR(WSC) modes at verticalvertical(VV) polarization channel are discussed. This work focuses on investigating the observation of rainfall using GF-3 SAR. These images were collocated with winds from the European Centre for Medium-Range Weather Forecasts(ECMWF), significant wave height simulated from the WAVEWATCH-III(WW3) model, sea surface currents from climate forecast system version 2(CFSv2) of the National Centers for Environmental Prediction(NCEP) and rain rate data from the Tropical Rainfall Measuring Mission(TRMM) satellite. Sea surface roughness,was compared with the normalized radar cross section(NRCS) from SAR observations, and indicated a 0.8 correlation(COR). We analyzed the dependences of the difference between model-simulated NRCS and SARmeasured NRCS on the TRMM rain rate and WW3-simulated significant wave height. It was found that the effects of rain on SAR damps the radar signal at incidence angles ranging from 15° to 30°, while it enhances the radar signal at incidence angles ranging from 30° to 45° and incidence angles smaller than 10°. This behavior is consistent with previous studies and an algorithm for rain rate retrieval is anticipated for GF-3 SAR.