Petrology of the Baszkówka L5 chondrite: A record of surface‐forming processes on the parent body

Abstract— We review the petrology of Baszkówka, present new microprobe data on mineral constituents, and propose a model for surface properties of the parent body consistent with these data. The low shock index and high porosity of the Baszkówka L5 chondrite mean that considerable primary textural and petrographic detail is preserved, allowing insight into the structure and evolution of the parent body. This meteorite formed in a sedimentary environment resembling that in which pyroclastic rocks are deposited. The origin of the component chondrules, achondritic fragments (mostly olivine and pyroxene aggregates), chondritic‐achondritic aggregates, and compound chondrules can be explained by invoking collision of 2 melted or partially melted planetesimals, each covered with a thin crust. This could have happened at an early stage in the evolution of the solar system, between 1 and 2 Myr after its origin. The collision resulted in the formation of a cloud containing products of earlier magmatic crystallization (chondrite and achondrite fragments) from which new chondrules were created. Particle collision in this cloud produced fragmented chondrules, chondritic‐achondritic aggregates, and compound chondrules. Within this low‐density medium, these particles were accreted on the surface of the larger of the planetesimals involved in the collision. The density of the medium was low enough to prevent grain‐size sorting of the components but high enough to prevent the total loss of heat and to enable the welding of fragments on the surface of the body. The rock material was homogenized within the cloud and, in particular, within the zone close to the planetesimal surface. The hot material settled on the surface and became welded as molten or plastic metal, and sulfide components cemented the grains together. The process resembled the formation of welded ignimbrites. Once these processes on the planetesimal surface were completed, no subsequent recrystallization occurred. The high porosity of the Baszkówka chondrite indicates that the meteorite comes from a near‐surface part of the parent body. Deeper parts of the planetesimal would have been more massive because of compaction.     

Icefish Adaptations to Climate Change on the South Georgia Island Shelf (Sub-Antarctic)

Icefish populations continue to decline. Historical as well as current over-exploitations of stocks aggravated by climate change are frequently seen as res     

An interdisciplinary study of weathering effects in ordinary chondrites from the Acfer region,Algeria

Abstract— Weathering effects on meteorite finds from the Acfer region were studied by various analytical techniques and in dependence on the depth of sampling. In thin sections of weathered meteorites, weathering effects usually decrease from the outside to the interior of the meteorite. The results of evolved gas analysis indicate that variation in weathering between surface and core is not significant in respect to the formation of Fe-oxyhydroxides. The secondary alteration effects in the noble gases are distributed unevenly throughout the specimens, as seen in the nonsystematic differences observed for the heavy noble gases. Chemical analyses show significant enrichment of Ba and Sr in the outer parts of the weathered samples due to element contamination through aqueous solution. Iron, Ni, and Co are partly flushed from the system as the metal oxidation proceeds. Oxygen isotopes show increases in δ¹⁸O and δ¹⁷O with increasing terrestrial age. For a set of H3 chondrites, the degree of weathering determined from the water content was correlated with terrestrial ages and is discussed with respect to possible weathering mechanisms.     

Definition of subfossil meandering palaeochannels

The determination of the bottom of a subfossil meandering palaeochannel is important for investigations of the palaeohydrology of valley bottoms, and crucial for the quantitative estimation of past river discharges. The authors present a procedure on the basis of which the bottom of a palaeochannel can be precisely determined. It is based on an analysis of the stratigraphic variability of such features of deposits as: mean diameter, standard deviation of the grain-size composition, the percentage of sand, and ignition loss.     

Determination of Fluorine in Eighty International Geochemical Reference Samples by Proton Induced Gamma Ray Emission Spectrometry (PIGE)

Fluorine content has been determined non destructively in eighty international geochemical reference samples (GRS) including rocks, soils, sediments, minerals and ores, by proton induced gamma ray emission spectrometry (PIGE) using the nuclear reaction ¹⁹F(p,αγ) ¹⁶O. Under our operating conditions, the detection limit is around 25 ppm. Our analytical results are compared with the presently preferred values when available or with other published data. The general agreement between this work and reported values is reasonably good. The present paper includes results on several GRS for which existing data are rather scarce or even inexistant.     

Petrology,chemistry, and isotopic compositions of the lunar highland regolith breccia Dar al Gani 262

Abstract— Lunar meteorite Dar al Gani 262 (DG 262)—found in the Libyan part of the Sahara—is a mature, anorthositic regolith breccia with highland affinities. The origin from the Moon is undoubtedly indicated by its bulk chemical composition; radionuclide concentrations; noble gas, N, and O isotopic compositions; and petrographic features. Dar al Gani 262 is a typical anorthositic highland breccia similar in mineralogy and chemical composition to Queen Alexandra Range (QUE) 93069. About 52 vol% of the studied thin sections of Dar al Gani 262 consist of fine-grained(100 μm) constituents, and 48 vol% is mineral and lithic clasts and impact-melt veins. The most abundant clast types are feldspathic fine-grained to microporphyritic crystalline melt breccias (50.2 vol%; includes recrystallized melt breccias), whereas mafic crystalline melt breccias are extremely rare (1.4 vol%). Granulitic lithologies are 12.8 vol%, intragranularly recrystallized anorthosites and cataclastic anorthosites are 8.8 and 8.2 vol%, respectively, and (devitrified) glasses are 2.7 vol%. Impact-melt veins (5.5 vol% of the whole thin sections) cutting across the entire thin section were probably formed subsequent to the lithification process of the bulk rock at pressures below 20 GPa, because the bulk rock never experienced a higher peak shock pressure. Mafic crystalline melt breccias are very rare in Dar al Gani 262 and are similar in abundance to those in QUE 93069. The extremely low abundance of mafic components and the bulk composition may constrain possible areas of the Moon from which the breccia was derived. The source area of Dar al Gani 262 must be a highland terrain lacking significant mafic impact melts or mare components. On the basis of radionuclide activities, an irradiation position of DG 262 on the Moon at a depth of 55–85 g/cm³and a maximum transit time to Earth <0.15 Ma is suggested. Dar al Gani 262 contains high concentrations of solar-wind-implanted noble gases. The isotopic abundance ratio ⁴⁰Ar/³⁶Ar < 3 is characteristic of lunar soils. The terrestrial weathering of DG 262 is reflected by the occurrence of fractures filled with calcite and by high concentrations of Ca, Ba, Cs, Br, and As. There is also a large amount of terrestrial C and some N in the sample, which was released at low temperatures during stepped heating. High concentrations of Ni, Co, and Ir indicate a significant meteoritic component in the lunar surface regolith from which DG 262 was derived.     

UNDERGROUND GRAVITY SURVEY IN ALPINE REGIONS*

An underground gravity study was carried out under extreme conditions of the Alpine regions. The lead–zinc mine Bleiberg, Carinthia, was selected as an example to show the possibilities and limitations of the subsurface gravity method. For in situ density determinations, gravity measurements were made in two vertical mine shafts passing through Triassic sedimentary rocks of the Bleiberg Unit. The main prblem in gravity data reduction in extremely rugged topography is the accurate calculation of the terrain effect on underground stations. A general discussion of the various corrections required for the gravity measurements in the mine is presented. The mean interval densities in the two shafts, in limestone, dolomite, and schists formations, were determined as 2.76 and 2.77 g/cm³, respectively, with an accuracy of better than 0.01 g/cm³ for a depth interval of 50 m. The interval densities provide valuable information about the lithological and structural changes in the shaft surroundings and also agree well with the representative hand sample densities. In the second part, the applications of subsurface horizontal gravity surveys in exploration are discussed. Since the influence of topography is less underground because of the greater distance to the surface, subsurface surveys have definite advantages over surface surveys and can be very helpful in locating anomalous density zones in the mines. An example of gravity survey with a station spacing of 10 m at a depth of about 540 m is presented.     

The Quadrennial Ozone Symposium 2016

<正>1.Overview The 2016 Quadrennial Ozone Symposium(QOS-2016)was held on 4–9 September 2016 in Edinburgh,UK.The Symposium was organized by the International Ozone Commission(IO3C),the NERC Centre for EcologyHydrology and the University of Edinburgh,and was co-sponsored by the International Union of Geodesy and Geophysics,the International Association of Meteorology and Atmospheric     

A warped m= 2 water maser disc in V778 Cyg?

The silicate carbon star V778 Cyg is a source of 22-GHz water maser emission which was recently resolved by MERLIN. Observations revealed an elongated     -like structure along which the velocities of the maser features show a linear dependence on the impact parameter. This is consistent with a doubly warped   m = 2  disc observed edge-on. Water masers and silicate dust emission (detected by the Infrared Astronomical Satellite and Infrared Space Observatory ) have a common origin in O-rich material and are likely to be co-located in the disc. We propose a detailed self-consistent model of a masing gas–dust disc around a companion to the carbon star in a binary system, which allows us to estimate the companion mass of  1.7 ± 0.1 M_⊙  , the disc radius of  40 ± 3  au and the distance between companions of ∼80 au. Using a dust–gas coupling model for water masing, we calculate the maser power self-consistently, accounting for both the gas and the dust energy balances. Comparing the simulation results with the observational data, we deduce the main physical parameters of the masing disc, such as the gas and dust temperatures and their densities. We also present an analysis of the stability of the disc.