Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

水库地震主震发生时间的预测

水利工程对水库地震的抗震设防要求事先对水为地震进行预测。预测内容包括蓄水后诱发地震的危险性（可能性、）最大震级、最大震的地占紧及不库地震对场址地震动参数的影响。除主震时间的预测外，本文第一作者都曾提出过初步的预测方法。本文认为，水库地震前震波速比异常、非线性灰色模型以及前震系列回归等方法，是预测主震时间的有前途的方法。     

Byproduct Formation During the Reduction of TCE by Zero-Valence Iron and Palladized Iron

Trichloroethene (TCE) was reduced with zero-valence iron and palladized iron in zero-head-space extractors. Progress of the reaction in these batch studies was monitored with purge-and-trap gas chromatography and a flame ionization detector. When a 5 ppm initial concentration of TCF. reacts with zero-valence iron, approximately 140 ppb of vinyl chloride persists for as long as 73 days. The concentration of vinyl chloride (approximately If) ppb) remaining with palladized iron is approximately an order of magnitude less than when zero-valence iron is the reductant. These data suggest that volatile byproducts may be under-represented in oilier published data regarding reduction with zero-valence metals. These results also demonstrate that the reduction of TCE with palladized iron (0.05 percent palladium) is more than an order of magnitude faster than with zero-valence iron. Wilh a 5:1 solution-to-solid ratio the TCE half-life with zero-valence iron is 7.41 hours. but is only 0.59 hours with the palladized iron.     

网络环境下地震科技信息工作的思考

进入21世纪以来,信息技术得到飞速发展,使得信息获取途径日益呈现出多元化特性,强烈地冲击了传统的地震科技信息工作依赖馆藏文献提供为主的信息管理和服务模式.同时也更凸显了地震科技信息工作在信息开发利用与服务上的种种缺陷.变革中的社会信息环境,迫使我们重新审视和思考网络环境下地震科技信息管理与服务等诸多问题,加强地震科技信息工作创新的研究与思考.     

碳酸岩Sr、Nd、Pb 同位素地球化学研究评述

碳酸岩是出露相对较少的幔源岩石，其中Sr与Nd是研究地幔物质组成的主要对象之一。本文统计了世界上主要碳酸岩的锶、钕、铅同位素组成特征；研究显示，碳酸岩源区主要是洋岛玄武岩高U／Pb的HIMU端员和富集端员(EM1或EM2)的混合作用；此外大部分碳酸岩的锶、钕同位素落在大洋玄武岩范围内；这些均表明其成因与地慢柱有密切联系。碳酸岩及与之共生的硅酸岩的同源或独立源区模式部很难充分解释两者同位素组成特征，逭反映碳酸岩的演化模式涉及更复杂的过程。可能是俯冲作用使碳酸岩源区经历不同时间和程度的富集、亏损过程导致地幔源区成分不均一。     

民乐、山丹6.1级地震异常及台站实现短临预报的思考

在综合分析了民乐-山丹6.1级地震前张掖中心台范围内震兆异常特征的基础上,总结了本次地震前该台的短临预报过程及存在的问题,对今后台站如何搞好地震短临预报工作进行了探讨.     

Green''''s functions for uniformly distributed loads acting on an inclined line in a poroelastic layered site

Based on one type of practical Biot's equation and the dynamic-stiffness matrices of a poroelastic soil layer and half-space, Green's functions were derived for uniformly distributed loads acting on an inclined line in a poroelastic layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green's functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.     

一种利用机载激光点云的河流横纵断面自动提取方法

传统的河流断面测量方法具有周期长、成本高、外业多等不足,为此提出一种基于机载激光点云的河流横纵断面自动提取方法.首先,使用渐进三角网滤波器从机载点云中分离出地面点,用以构建三角网模型,并将其转化成数字高程模型数据.接着,利用洼地填充、流向分析、流量分析、河流栅格提取、矢量化等水文分析模块,从数字高程模型数据中自动提取出...     

一次自上向下发展的高原涡的多尺度动力学分析

高原涡作为经常给我国带来暴雨等灾害的天气系统,其形成一般认为是通过感热和潜热自下而上激发的,然而,2013年5月下旬发生的一次引发其下游灾害性强降水的高原涡却是由对流层高层天气尺度低涡诱发的.为此,基于新发展的多尺度子空间变换和多尺度能量涡度方法以及ERA5再分析资料对其动力学过程进行了详尽的探讨,先将原始场重构到三个...