Observations with the Visual and Infrared Mapping Spectrometer (VIMS) during Cassini's flyby of Jupiter

The Cassini Visual and Infrared Mapping Spectrometer (VIMS) is an imaging spectrometer covering the wavelength range 0.3-5.2 μm in 352 spectral channels, with a nominal instantaneous field of view of 0.5 mrad. The Cassini flyby of Jupiter represented a unique opportunity to accomplish two important goals: scientific observations of the jovian system and functional tests of the VIMS instrument under conditions similar to those expected to obtain during Cassini's 4-year tour of the saturnian system. Results acquired over a complete range of visual to near-infrared wavelengths from 0.3 to 5.2 μm are presented. First detections include methane fluorescence on Jupiter, a surprisingly high opposition surge on Europa, the first visual-near-IR spectra of Himalia and Jupiter's optically-thin ring system, and the first near-infrared observations of the rings over an extensive range of phase angles (0-120°). Similarities in the center-to-limb profiles of H⁺₃ and CH₄ emissions indicate that the H⁺₃ ionospheric density is solar-controlled outside of the auroral regions. The existence of jovian NH₃ absorption at 0.93 μm is confirmed. Himalia has a slightly reddish spectrum, an apparent absorption near 3 μm, and a geometric albedo of 0.06±0.01 at 2.2 μm (assuming an 85-km radius). If the 3-μm feature in Himalia's spectrum is eventually confirmed, it would be suggestive of the presence of water in some form, either free, bound, or incorporated in layer-lattice silicates. Finally, a mean ring-particle radius of 10 μm is found to be consistent with Mie-scattering models fit to VIMS near-infrared observations acquired over 0-120° phase angle.     

Impact of lightning on organic matter-rich soils: influence of soil grain size and organic matter content on underground fires

A detailed study was carried out on a piece of land that had been struck by lightning during the violent rainstorm that raged over the Island of S?o Miguel (Azores Archipelago) in late October 2006. Temperature and gas measurements (CO₂, CO, H₂S and CH₄) were performed in four study trenches, dug in an area of ∼3 m², where an underground fire had been initiated by the impact with a lightning stroke, followed by the emission of a column of gases and smoke. The soil under study was originally a well-pedogenized about 80 cm thick bed, made of volcanic clayey to silty tephra fallouts and contained 5.5–9.7% of organic matter. The underground fire was monitored for one week and revealed a peak release of 404 ppm CO and 3.4% CO₂ originating from a horizon located about 45 cm under the soil surface. Measurements of temperature, performed one week after the impact, indicated a maximum value of 326°C inside the soil, while 516.5°C were measured on the surface of a lava block interred about 20 cm under the surface. Subsequently, a stratigraphic and sedimentologic study proved the role of the grain-size of the soil and of the organic matter content of the different horizons of the impact area, in determining the ratio between anoxic/oxidised combustion conditions and in the progress of the process itself. It was also noticed that combustion was not total all over in the soil bed and that the process had slightly migrated toward SW during the observation period. The combustion process went on for about ten days, in spite of several other violent rainstorms, until it was artificially extinguished through the excavations made to obtain study trenches. This particular circumstance evidenced the potential natural hazard represented by this kind of atmospheric event, especially in a land where the volcanic nature of the soil may easily mislead inexperienced observers and, consequently, delay proper action.     

ASPI experiment: measurements of fields and waves on board the INTERBALL-1 spacecraft

The plasma-wave experiment ASPI (analysis of spectra of plasma waves and instabilities) on board the INTERBALL spacecraft is a combined wave diagnostics experiment. It performs measurements of the DC and AC magnetic field vector by flux-gate and searchcoil sensors, the DC and AC electric field vector by Langmuir double probes and the plasma current by Langmuir split probe. Preliminary data analysis shows the low noise levels of the sensors and the compatibility of new data with the results of previous missions. During several months of in-orbit operation a rich collection of data was acquired, examples of which at the magnetopause and plasma sheet are presented in second part of the paper.     

Exploring lava‐flow hazards at Pico Island,Azores Archipelago (Portugal)

Pico, the youngest island of the Azores Archipelago (Portugal), is characterized by a central volcano and a 30‐km‐long fissure zone. Its eruption rate is the highest of the Azores islands, with more than 35 eruptions in the last 2000 years. Here, we estimate the lava‐flow hazard for Pico Island by combining the vent opening probability derived from the spatial distribution of eruptive fissures, the classes of expected eruptions inferred from the physical and chemical characteristics of historical eruptions, and the lava‐flow paths simulated by the MAGFLOW model. The most likely area to host new eruptions is along a WNW–ESE trend centred on the central volcano, with the highest hazard affecting the two main residential zones of Lajes do Pico and Madalena. Our analysis is the first attempt to assess the lava‐flow hazard for Pico Island, and may have important implications for decision‐making in territorial management and future land‐use planning.     

Hydraulic modeling of flood pulses in the Middle Bussento Karst System (MBSKS), UNESCO Cilento Global Geopark,southern Italy

Karst systems provide water for domestic and industrial uses and for generating hydropower, but they can also create fluvial hazards, such as upstream back‐flooding and downstream karst flash‐flood events. However, these hazards are difficult to foresee due to the complex recharge‐discharge processes as well as the lack of information on the inside of the system, which has often not been completely surveyed by speleologists or explored by boreholes. To overcome these difficulties, hydro‐chemical data from the monitoring system in the Middle Bussento Karst System (MBSKS), one of the first Experimental Karst Systems in southern Italy, were recorded and previously discussed. Based on shared background in flood karst hydraulic modeling, this paper describes the conceptual premises and rationale of a general‐purpose hydraulic model that is suitable both for the MBSKS and for other Mediterranean, multi‐recharge, mature, conduit‐dominated karst systems. To test the reliability of the model, simulations of time–space behavior and response are performed using natural and artificial flood pulses “as tracers”, considering a “pulse” as a significant variation in water quantity and/or quality. The results of the model explain the interactions between allogenic, autogenic, and anthropogenic recharges from differentiated sources and phreatic conduit systems. These results also clarify the overall response of karst springs at typical time scales of flood pulses. Table acronym name     

Local- and global-scale seismic analyses of historical masonry compounds in San Pio delle Camere (L’Aquila,Italy)

Masonry building aggregates are large parts of the Italian building heritage often designed without respecting seismic criteria. The current seismic Italian code does not foresee a clear calculation method to predict their static nonlinear behaviour. For this reason, in this paper firstly, a simple methodology to forecast the seismic response of masonry aggregates in San Pio delle Camere (L’Aquila, Italy) has been set up starting from the provisions of the Italian Guidelines on Cultural Heritage. The implemented procedure has been calibrated on the results of two FEM structural analysis programs used to investigate three masonry building compounds. As a result, a design chart used to correctly predict the base shear of aggregate masonry units starting from code provisions has been set up. Later on, the large-scale seismic vulnerability and damage appraisal of the inspected historical centre has been done on the basis of a quick methodology, already implemented and experienced by the author in some historical centres of the Campania region. The analysis result was a numerical correlation between vulnerability index and mean damage grade of examined building compounds. In particular, a damage forecast under numerical way has been firstly estimated and then compared with the real one. The post-earthquake scenario has represented an ideal term of comparison for effectively testing the reliability of the employed technique, which should be further extended to other Italian historical centres.

     

Sicilian serpentinite xenolihs conaining abioic organics wih nanodiamond clusers ans key model for prebioic processes

Rock fragments from the deepest parts of a buried hydrothermal system belonging to the Mesozoic Tethys Oceanentered as xenoliths in a Miocenic diatreme. hence b...     

A Measurement of Omega from the North American Test Flight of Boomerang

We use the angular power spectrum of the cosmic microwave background, measured during the North American test flight of the Boomerang experiment, to constrain the geometry of the universe. Within the class of cold dark matter models, we find that the overall fractional energy density of the universe Omega is constrained to be 0.85相似文献   

Martian water vapor: Mars Express PFS/LW observations

We present the seasonal and geographical variations of the martian water vapor monitored from the Planetary Fourier Spectrometer Long Wavelength Channel aboard the Mars Express spacecraft. Our dataset covers one martian year (end of Mars Year 26, Mars Year 27), but the seasonal coverage is far from complete. The seasonal and latitudinal behavior of the water vapor is globally consistent with previous datasets, Viking Orbiter Mars Atmospheric Water Detectors (MAWD) and Mars Global Surveyor Thermal Emission Spectrometer (MGS/TES), and with simultaneous results obtained from other Mars Express instruments, OMEGA and SPICAM. However, our absolute water columns are lower and higher by a factor of 1.5 than the values obtained by TES and SPICAM, respectively. In particular, we retrieve a Northern midsummer maximum of 60 pr-μm, lower than the 100-pr-μm observed by TES. The geographical distribution of water exhibits two local maxima at low latitudes, located over Tharsis and Arabia. Global Climate Model (GCM) simulations suggest that these local enhancements are controlled by atmospheric dynamics. During Northern spring, we observe a bulge of water vapor over the seasonal polar cap edge, consistent with the northward transport of water from the retreating seasonal cap to the permanent polar cap. In terms of vertical distribution, we find that the water volume mixing ratio over the large volcanos remains constant with the surface altitude within a factor of two. However, on the whole dataset we find that the water column, normalized to a fixed pressure, is anti-correlated with the surface pressure, indicating a vertical distribution intermediate between control by atmospheric saturation and confinement to a surface layer. This anti-correlation is not reproduced by GCM simulations of the water cycle, which do not include exchange between atmospheric and subsurface water. This situation suggests a possible role for regolith-atmosphere exchange in the martian water cycle.     

Methods for the analysis of data from the Planetary Fourier Spectrometer on the Mars Express Mission

This work presents an algorithm for the scientific analysis of individual calibrated measurements from the Planetary Fourier spectrometer (PFS).The instrument, included in the scientific payload of the ESA Mars Express mission to Mars, acquires spectra in the range between 250 and 8200 cm⁻¹, with a sampling step of ∼1 cm⁻¹ and an effective resolution of ∼2 cm⁻¹. The observed radiance depends on several parameters of the atmosphere and surface of Mars as described by the radiative transfer equation. Adopting the very general formalism of Bayesian analysis, we determined which quantities are actually retrievable from individual measurements. Namely, they are: the surface temperature, the column density of dust and water ice aerosols in the atmosphere, the air temperature as a function of altitude (in the indicative range 5-45 km above the surface), the surface pressure, and the column density of water vapor and carbon monoxide. These evaluations are carried out taking into account the noise equivalent radiance (NER) of the instrument and the natural variabilities of the investigated parameters in the Martian environment, as estimated from the expectations of the European Martian Climate Dataset v3.1 (EMCD). Other parameters included in the radiative transfer equation shall be assumed as known, because they are not retrievable from individual measurements due to the instrumental NER or an underconstrained inverse problem: the surface emissivity in the thermal infrared, the optical properties of suspended dust and the analytical shape of dust concentration vs. altitude.During the development of the algorithm devoted to these studies, different approaches were evaluated on the basis of formal, computational and scientific considerations, with the aim to develop the general design of an integrated software package.The resulting code was extensively tested on a wide set of simulated PFS spectra. These spectra were computed from the atmospheric and surface conditions extracted from the EMCD, assumed to be representative of the Martian environment for different values of latitude, local time and season. Their comparison with the retrievals from simulated observations allowed us to evaluate the systematic and random errors affecting the procedures with respect to the different quantities involved. The code evaluates the surface temperature with an error in the order of 1 K, while the vertical air temperature profile is computed with an uncertainty less than 2 K from in the region between 5 and 20 km above the surface, increasing up to 7 K at 50 km. The column opacity of dust, measured in terms of integrated optical thickness at 1100 cm⁻¹, is computed with an error of around 0.13. The surface pressure determination is carried out with a typical uncertainty of 0.2-0.3 millibar. Several auxiliary tests allowed us to study the correlations between the different retrieval errors and the possible causes of incorrect PFS data interpretation. The choice of a suitable model for the dust optical properties is demonstrated to be particularly critical.This paper also presents the first discussion about application of the procedure to actual PFS Martian data. Despite the calibration issues still affecting the determination of absolute radiance in the near-infrared, the algorithm is able to achieve a satisfactory modeling of observations in a wide range of situations.