Seabed Morphology and Pollution Along the Bagnoli Coast (Naples, Italy): a Hypothesis for Environmental Restoration

Abstract. The interaction of coastal and submarine morphology with the hydrodynamic regimes exerts a control on coastal dynamic processes, conditioning the dispersion of sediments and potential pollutants existing in the area. Thus, the study of such parameters is useful in order to define environmental threats. Within the submerged sector of the Bagnoli coast and particularly in the southern part of the investigated area, there are sediment groups composed of very fine sands located in low-energy zones due to wave refraction and diffraction; they can also be found on the sea bottom and on the man-made structures typical of this zone. These areas show high pollutant levels of N, P, Cu, Fe, Mn, Ni, Pb, Zn, Cd, polyaromatic hydrocarbons (PAHs) and polychlorinated bi-phenyls (PCBs). The northern area, a place of high-energy hydrodynamic processes, also shows high concentration levels of pollutants due to the presence of secondary cell circulation.
Morphological research and analysis of textural characteristics of bottom sediments along the Bagnoli coast allowed the actual processes and their evolution in space and time to be defined. It has also been possible to correlate such processes to the seabed morphology system, the wave formations which affect the coast, the complex system of sediment transport, as well as to the man-made interventions in the area. The results of recent chemical analyses of beach sediments and bottom sediments off the Bagnoli coast were also incorporated. They prove the presence of heavy metals, PAHs and PCBs in high and sometimes very high concentrations. Finally, based on the results of research and analyses, a hypothesis for an intervention for environmental restoration has been formulated in order to renaturalise the coast through dredging and treatment of the sand, both on the seabed and on the emerged beach.     

西北五省(区)生态环境综合分区及其建设对策

本文以图像遥感解译为主 ,结合野外实际考察 ,并通过抽样验证完成。在对生态环境界定和赋予内涵的基础上 ,根据区划目的、原则和所选取的指标体系 ,从生态环境分类入手 ,经过从上向下续分和由下向上合并的反复磨合过程、专家集成模拟 ,对西北五省(区 )生态环境做了全面的综合分区研究 ,并针对所存在的生态环境问题 ,提出生态环境保护和建设的对策 ,为西北五省 (区 )实施西部大开发生态环境监测、治理、建设和规划提供科学依据。     

Mise en évidence d'un nouveau front de chevauchement dans l'Atlas tunisien oriental de Tunisie par sismique réflexion. Contexte structural régional et rôle du Trias salifère

Structural interpretations of newly acquired seismic lines in northeastern Tunisia allow us to highlight a new thrust front for the Atlasic range of Tunisia, in contrast to the previously Zaghouan fault thrust Dorsale zone. This new thrust front takes place on weakness tectonic zones, materialized by inherited faults anchored on the pre-Triassic basement. This front seems to be a paleogeographic trend controlling structural style and basin fill with a synsedimentary activity. The front is expressed by reverse faults, thrust faults, back thrusting, and decollement structures. To cite this article: S. Khomsi et al., C. R. Geoscience 336 (2004).     

Halocinèse précoce associée au rifting jurassique dans l'Atlas central de Tunisie (région de Majoura–El Hfay)

Seismic and sequence stratigraphy analyses, petroleum-well control and surface data studies of the Majoura–El Hfay region in the Central Atlas of Tunisia had led to identify and calibrate Jurassic seismic horizons. Seismic stratigraphic sections, seismic tectonics analyses, isochron and isopach mapping of Jurassic sequences show a differentiated structuring of platform and depocentre blocks limited by deep-seated NE–SW, north–south east–west and NW–SE faults intruded by Upper Triassic salt. The early salt migration seems to have started by the platform fracturing during the Lower Liassic rifting event. These movements are fossilized by thickness variations of Jurassic horizons, aggrading and retrograding onlap and toplap structures between subsiding rim-syncline gutters and high platform flanks intruded by salt pillows and domes. The salt migration is also attested by Middle and Upper Jurassic space depocentre migrations. Around the Majoura–El Hfay study blocks bounded by master faults, Triassic salt have pierced the Cretaceous and Tertiary sedimentary cover in a salt diapir extrusion and salt wall structures. To cite this article: D. Tanfous Amri et al., C. R. Geoscience 337 (2005).     

Elastoplastic model with loading memory surfaces (LMS) for monotonic and cyclic behaviour of geomaterials

A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd.     

Climate change mitigation scenarios and policies and measures: the case of Kazakhstan

This article illustrates the main difficulties encountered in the preparation of GHG emission projections and climate change mitigation policies and measures (P&M) for Kazakhstan. Difficulties in representing the system with an economic model have been overcome by representing the energy system with a technical-economic growth model (MARKAL-TIMES) based on the stock of existing plants, transformation processes, and end-use devices. GHG emission scenarios depend mainly on the pace of transition in Kazakhstan from a planned economy to a market economy. Three scenarios are portrayed: an incomplete transition, a fast and successful one, and even more advanced participation in global climate change mitigation, including participation in some emission trading schemes. If the transition to a market economy is completed by 2020, P&M already adopted may reduce emissions of CO₂ from combustion by about 85 MtCO₂ by 2030 – 17% of the emissions in the baseline (WOM) scenario. One-third of these reductions are likely to be obtained from the demand sectors, and two-thirds from the supply sectors. If every tonne of CO₂ not emitted is valued up to US$10 in 2020 and $20 in 2030, additional P&M may further reduce emissions by 110 MtCO₂ by 2030.     

PCA and SVM as geo-computational methods for geological mapping in the southern of Tunisia,using ASTER remote sensing data set

The purpose of this study was to examine the efficiency of Advanced Space Borne Thermal Emission and Reflection Radiometer (ASTER) data in the discrimination of geological formations and the generation of geological map in the northern margin of the Tunisian desert. The nine ASTER bands covering the visible (VIS), near-infrared (NIR) and short-wave infrared (SWIR) spectral regions (wavelength range of 400–2500 nm) have been treated and analyzed. As a first step of data processing, crosstalk correction, resampling, orthorectification, atmospheric correction, and radiometric normalization have been applied to the ASTER radiance data. Then, to decrease the redundancy information in highly correlated bands, the principal component analysis (PCA) has been applied on the nine ASTER bands. The results of PCA allow the validation and the rectification of the lithological boundaries already published on the geologic map, and gives a new information for identifying new lithological units corresponding to superficial formations previously undiscovered. The application of a supervised classification on the principal components image using a support vector machine (SVM) algorithm shows good correlation with the reference geologic map. The overall classification accuracy is 73 % and the kappa coefficient equals to 0.71. The processing of ASTER remote sensing data set by PCA and SVM can be employed as an effective tool for geological mapping in arid regions.     

The tectono‐stratigraphic evolution of the Austral Basin and adjacent areas against the background of Andean tectonics,southern Argentina,South America

The Austral Basin (or Magallanes Basin) in southern Argentina is situated in a highly active tectonic zone. The openings of the South Atlantic and the Drake Passage to the east and south, active subduction in the west, and the related rise of the Andes have massively influenced the evolution of this area. To better understand the impacts of these tectonic events on basin formation to its present‐day structure we analysed 2D seismic reflection data covering about 95 000 km² on‐ and 115 000 km² offshore (Austral ‘Marina’ and Malvinas Basin). A total of 10 seismic horizons, representing nine syn‐ and post‐ rift sequences, were mapped and tied to well data to analyse the evolution of sedimentary supply and depocenter migration through time. 1D well backstripping across the study area confirms three main tectonic stages, containing (i) the break‐up phase forming basement graben systems and the evolution of the Late Jurassic – Early Cretaceous ancient backarc Austral/Rocas Verdes Basin (RVB), (ii) the inversion of the backarc marginal basin and the development of the foreland Austral Basin and (iii) the recent foreland Austral Basin. Synrift sedimentation did not exceed the creation of accommodation space, leading to a deepening of the basin. During the Early Cretaceous a first impulse of compression due to Andes uplift caused rise also of parts of the basin. Controlling factors for the subsequent tectonic development are subduction, balanced phases of sedimentation, accumulation and erosion as well as enhanced sediment supply from the rising Andes. Further phases of rock uplift might be triggered by cancelling deflection of the plate and slab window subduction, coupled with volcanic activity. Calculations of sediment accumulation rates reflect the different regional tectonic stages, and also show that the Malvinas Basin acted as a sediment catchment after the filling of the Austral Basin since the Late Miocene. However, although the Austral and Malvinas Basin are neighbouring basin systems that are sedimentary coupled in younger times, their earlier sedimentary and tectonic development was decoupled by the Rio Chico basement high. Thereby, the Austral Basin was affected by tectonic impacts of the Andes orogenesis, while the Malvinas Basin was rather affected by the opening of the South Atlantic.     

Towards new applications of underwater photogrammetry for investigating coral reef morphology and habitat complexity in the Myeik Archipelago,Myanmar

Photogrammetry represents a non-destructive, cost-effective tool for coral reef monitoring, able to integrate traditional remote sensing techniques and support researchers’ work. However, its application to submerged habitats is still in early stage. We present new ways to employ Structure from Motion techniques to infer properties of reef habitats. In particular, we propose the use of Digital Surface Models and Digital Terrain Models for assessing coral colonies extension and height and discriminating between seabed and coral cover. Such information can be coupled with digital rugosity estimates to improve habitat characterization. DTM, DSM and orthophotos were derived and used to compute a series of metrics like coral morphologies, reef topography, coral cover and structural complexity. We show the potentialities offered by underwater photogrammetry and derived products to provide useful basic information for marine habitat mapping, opening the possibility to extend these methods for large-scale assessment and monitoring of coral reefs.