Geochemical and hydrodynamic constraints on the distribution of trace metal concentrations in the lagoon of Nouméa, New Caledonia

Seawater samples were collected in the lagoon of Nouméa (southwest New Caledonia) along two transects from eutrophic coastal bays to the oligotrophic barrier reef. Land-based emissions to the lagoon were measured with dissolved and particulate concentrations of chromium (Cr) and nickel (Ni), used as tracers of both terrigenous and industrial (Ni ore treatment) activities, as well as dissolved and particulate concentrations of zinc (Zn), used as a tracer of urban effluents. The spatial variability of metal concentrations was related to geochemical and hydrodynamic conditions, i.e., respectively: (1) natural and anthropogenic emission sources, and chemical processes occurring in the water column; and (2) water residence times. The parameter used to describe the residence time of water masses was the local e-flushing time, i.e. the time required for a tracer mass contained within a given station to be reduced by a factor 1/e. High metal concentrations were found in coastal areas (up to 9000 ng dissolved Ni L⁻¹), and steeply decreased with distance from the coast (down to 101 ng dissolved Ni L⁻¹ near the barrier reef) to reach levels similar to those found in remote Pacific waters, suggesting a rapid renewal of waters close to the barrier. Distributions of metals in the lagoon are controlled upstream by land-based emission sources and later chemical processes. Then hydrodynamics constrain metal distributions, as shown by the observed relationship between local e-flushing times and the spatial variability of metal concentrations. In addition, a change in the direction of prevailing winds yielded a decrease of dissolved metal concentrations at the same site by a factor of 2.5 (Cr and Ni) and 2.9 (Zn). It is suggested that the residence time is a key parameter in the control of elemental concentrations in the lagoon waters, as much as land-based emission sources.     

Contributions to atmospheric methane by natural seepages on the U.K. continental shelf [Mar. Geol. 137 (1997) 165–189]

Natural gas seepages occur on the United Kingdom's continental shelf and although published reports suggest that they are very rare, the petroleum industry has identified, but not publicly reported, many more. There is also very little data on the flux of gas from seabed seepages, and even less on the contribution of seepages to atmospheric concentrations of gases such as methane.

Potential gas source rocks include Quaternary and Tertiary peats as well as petroliferous source rocks such as the Carboniferous Coal Measures and the Upper Jurassic Kimmeridge Clays. There are also other organic-rich sediments which are potential source rocks. Together these cover a considerable part of the U.K. continental shelf.

Analogue seismic reflection (pinger) profiles acquired during the British Geological Survey's regional mapping programme have been reviewed to identify water column targets including fish and plumes of gas bubbles. The ability to distinguish targets is critical to an assessment of the distribution of gas seepages. Both theoretical predictions of target identity and the habits of shoaling fish have been investigated in order to identify a method of distinction.

Data from seabed seepages and measurements of seepage rates have been used to establish likely ranges of gas flux rates and the sizes of gas bubbles. The likelihood that a rising bubble will survive and escape into the atmosphere is determined primarily by bubble size and water depth; methane, the principal constituent of seepage gas, is relatively unreactive and sparingly soluble.

The studies have enabled a new estimate of the distribution of gas seepages on the U.K. continental shelf, and of the contribution to atmospheric methane levels. The results suggest that natural gas seepages are significantly more important as a source of methane than had hitherto been established. It is estimated that between 120,000 and 3.5 mtonnes of methane per year come from a continental shelf area of about 600,000 km². This represents between 2% and 40% of the total United Kingdom methane emission. It is suggested that similar contributions arise from other continental shelf areas worldwide, and that geological sources of atmospheric methane are more significant than is generally acknowledged.     

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Potential for irradiation of methane to form complex organic molecules in impact craters: Implications for Mars, Titan and Europa

The release of methane from crater sites following meteorite impact is a possible consequence of the thermal alteration of organic matter, or tapping of reservoired gas of biogenic or abiogenic origin. At least the latter is feasible on Mars. Methane and higher hydrocarbons are susceptible to polymerization and precipitation by radioactive minerals. Where such minerals are present in impact target rocks, the craters can be a preferred site for carbon concentration, and the formation of complex organic molecules. On icy bodies, such as Titan and Europa, methane released by impact could be a fuel for prebiotic chemistry involving other forms of irradiation.     

Quality Assessment of Cartographic Generalisation

This paper proposes a methodology to assess the quality of cartographic generalisa‐tion, which consists of representing geographic space in a simplified way according to the scale and the objectives of the intended map. The automation of this process makes the derivation of data easier, but the quality of the results is often not evaluated. This paper proposes an assessment model based on: (1) characterisation of the data in their initial and final states at different levels of analysis; (2) a data quality assessment by comparison of the two characterisations; and (3) aggregation of the various assessment results to summarise data quality. The assessment algorithm has been implemented and the method has been tested to assess the generalisation of a small urban area. A visualisation tool for assessment of the results has been developed to validate the generalisation evaluation. The results of the research are presented and discussed at the end of the paper.     

Evidence for focused hot fluid flow within the Britannia Field, offshore Scotland, UK

Fluid inclusion and scanning electron microscope‐cathodoluminescence evidence indicates focused hot, saline, diagenetic fluid flow within the Eastern Flank of the Britannia Field, offshore Scotland, UK. The fluid was sourced from the Andrew Salt Dome, 10 km to the east. The fluids, which promoted quartz cementation of the upper zones within the field, were up to ～30°C hotter and had salinities up to ～10 wt% NaCl equivalent higher than fluids from lower in the reservoir section. During diagenesis hot saline fluids migrated westwards as part of a radiating ‘diagenetic front’ from the Andrew Salt Dome. Structural dip associated with the Eastern Flank of the Fladen Ground Spur impeded the westward movement of the diagenetic fluid. The quartz cements from the upper and lower reservoir zones can be distinguished by morphology. In the upper zones the quartz cements have well‐developed macro‐crystalline zoning and heterogeneous luminescence across the grain. In the lower zones, the cements are much less developed, unzoned and very weakly luminescent. The diagenetic fluids were primarily focused into Zone 45 within the upper reservoir. Furthermore, within the Main Platform Area the most prolific producing zone is Zone 45, indicating the importance of this interval as a permeable flow unit during both diagenetic and production timescales. Within the Eastern Flank, the quartz overgrowths have a major impact on reservoir permeability and thus well productivity. The overgrowths are most extensive in the originally clean sandstones with low clay content. Clay in optimum volumes (5–10%) can inhibit nucleation of the damaging quartz overgrowths without having a detrimental effect on pore connectivity. These observations provide a predictive concept for use in the search for relative reservoir sweetspots within the degraded Eastern Flank.     

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.     

Why chromatic imaging matters

During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u ? v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.