Influence of physico-mechanical properties of Indian dimension stones on cutting rate of diamond wire saw

Cutting performance of diamond wire saw is a key factor influencing mine planning, production scheduling, and equipment selection for dimension stone quarries. It is normally measured in terms of cutting rate. Rock samples collected from various granite and marble quarries in India were tested in laboratory to determine their physico-mechanical properties. Cutting rate of diamond wire saw was measured in the field studies during the actual cutting process in quarries. Using these laboratory determined properties and the cutting rate, a multiple linear regression model has been developed to predict the cutting rate of diamond wire saw. Physico-mechanical properties of rocks determined in laboratory are used as independent variables and cutting rate as predictor variable in the regression model. The study indicates that the cutting rate increases with a decrease in most of the hardness and strength parameters of rock. The final model is tested for its goodness of fit indicating a significant linear relation between cutting rate and physico-mechanical properties, namely tensile strength, slake durability index, and Cerchar hardness index with regression coefficient of 94%. The resulting model can be used suitably for different types of hard to medium hard and soft dimension stones. The generalized model for estimating the cutting rate becomes a handy tool for mining engineers to work out operating efficiency, expenses, planning etc. of the dimension stone block cutting.     

Modeling of the strong ground motion of 25th April 2015 Nepal earthquake using modified semi-empirical technique

On 25th April, 2015 a hazardous earthquake of moment magnitude 7.9 occurred in Nepal. Accelerographs were used to record the Nepal earthquake which is installed in the Kumaon region in the Himalayan state of Uttrakhand. The distance of the recorded stations in the Kumaon region from the epicenter of the earthquake is about 420–515 km. Modified semi-empirical technique of modeling finite faults has been used in this paper to simulate strong earthquake at these stations. Source parameters of the Nepal aftershock have been also calculated using the Brune model in the present study which are used in the modeling of the Nepal main shock. The obtained value of the seismic moment and stress drop is 8.26 × 10²⁵ dyn cm and 10.48 bar, respectively, for the aftershock from the Brune model .The simulated earthquake time series were compared with the observed records of the earthquake. The comparison of full waveform and its response spectra has been made to finalize the rupture parameters and its location. The rupture of the earthquake was propagated in the NE–SW direction from the hypocenter with the rupture velocity 3.0 km/s from a distance of 80 km from Kathmandu in NW direction at a depth of 12 km as per compared results.     

Final frontiers: the hunt for life elsewhere in the Universe

This paper seeks to review the likelihood of unearthing evidence of the existence of life elsewhere in the Universe. Although it has been demonstrated that life can thrive in the severest of conditions on Earth, detecting its presence in similarly habitable zones elsewhere is proving to be an extremely complex issue. There are many reasons for this, the major ones being that the distances involved are vast; the low potential signal to noise ratio, spatial and spectral resolutions arising from planets with biospheres; and biosignals themselves can be misleading. New telescopes with improved technology are on the horizon which will extend our capabilities, but it is still doubtful that any exploration could venture beyond the borders of our galaxy. Moreover, caution needs to be exercised when assessing the signals emitted by biomarkers as these could be produced abiotically. However, if the focus of the search should be concentrated around the area of M dwarf stars then, as we begin to understand the nature of habitable zones, our chances of eventually achieving our goals will be enhanced.     

Gully erosion in the Siwalik Hills,Nepal: estimation of sediment production from active ephemeral gullies

A simple field‐based monitoring programme was established in a small catchment (area 4·6 km²) to find the rates of gully erosion in the Siwalik Hills, Nepal. The rates are used to estimate the amount of sediment produced by gully erosion in the catchment. Three large and active gullies were selected with areas ranging from 0·44 to 0·78 ha. Aerial photographs taken in 1964, 1978 and 1992 were ortho‐rectified and used to study the dynamics of gully heads. The same gullies were also monitored manually using an orthogonal reference system fixed by erosion pins around the gully heads. Results from the aerial photos indicated that the gullies expanded remarkably over the period from 1964 to 1992, by 34 to 58 per cent. Head‐retreat rates during that period were 0·48, 0·55 and 0·73 m a^?1 and average annual sediment evacuation was estimated as 2534 ± 171, 959 ± 60 and 2783 ± 118 m³ a^?1 for the three gullies respectively. From the field measurement, estimated volumes were found to vary from 731 ± 57 to 2793 ± 201 m³ a^?1 over the monitoring period of two years. It was also found that the gullies produce sediment which accounts for up to 59 per cent of the sediment produced from surface erosion in the headwater catchment. The findings are useful for planning and executing appropriate control measures and constructing a sediment hazard map at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.     

EVALUATION OF EROSION PRODUCTIVITY IMPACT CALCULATOR （EPIC） MODEL FOR MIDDLE MOUNTAIN REGION OF NEPAL

This study verifies the applicability of EPIC model for an erosion plot (61 .2 m~2) and an uplandterraced watershed (72 ha) using a total of 94 rainfall events over a study period of two years. Inorder to analyze the effect of storm size on runoff and soil loss processes, rainfall events aredivided into three groups: small (<25mm), moderate (25--50mm) and large (>50mm). Resultsindicate that the model could predict reasonably well the runoff and soil loss from the erosion plotand the watershed for the moderate and large rainfall events. However, the runoff and soil lossprediction for the small rainfall events is found to be poor. On annual basis, both surface runoff andsoil loss predictions match well the observations. In ligh of the importance of the moderate andlarge rainfall events in producing most of the annual runoff and soil loss in the study area, the EPICmodel is applied to assess the impacts of erosion on agricultural productivity and to evaluatemanagement practices to protect watersheds in the