Contribution of 19F resonances on 18O(p,α)15N reaction rate

The ¹⁸O(p,α)¹⁵N reaction influences the isotopes production such as ¹⁹F, ¹⁸O, and ¹⁵N which can be used to test the models of stellar evolution. ¹⁹F is synthesized in both asymptotic giant branch (AGB) and metal-rich Wolf-Rayet (WR) stars. Using R-matrix theory we allow new values of resonances parameters in ¹⁹F. We show that the most important contribution to the differential and total cross section at low energies, comes from the levels in ¹⁹F situated at resonances energies E _R =151, 680 and 840 keV with spin and parity 1/2⁺. The total width of the 680 keV resonance is badly known. So, we have focused on this broad resonance corresponding to the 8.65 MeV level in ¹⁹F. We delimit the temperature range in which each resonance contribution to the total reaction rate occurs by analyzing the ratio (N _A 〈σν〉 _i /N _A 〈σν〉). This allowed us to show that the 680 and 840 keV broad resonances strongly dominate the reaction rate over the stellar temperature range T ₉=0.02–0.06 and T ₉=0.5–5. Finally, these results were compared to NACRE and Iliadis astrophysical compilations.     

Uniwavelength lidar sensitivity to spherical aerosol microphysical properties for the interpretation of Lagrangian stratospheric observations

The determination of stratospheric particle microphysical properties from multiwavelength lidar, including Rayleigh and/or Raman detection, has been widely investigated. However, most lidar systems are uniwavelength operating at 532 nm. Although the information content of such lidar data is too limited to allow the retrieval of the full size distribution, the coupling of two or more uniwavelength lidar measurements probing the same moving air parcel may provide some meaningful size information. Within the ORACLE-O3 IPY project, the coordination of several ground-based lidars and the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) space-borne lidar is planned during measurement campaigns called MATCH-PSC (Polar Stratospheric Clouds). While probing the same moving air masses, the evolution of the measured backscatter coefficient (BC) should reflect the variation of particles microphysical properties. A sensitivity study of 532 nm lidar particle backscatter to variations of particles size distribution parameters is carried out. For simplicity, the particles are assumed to be spherical (liquid) particles and the size distribution is represented with a unimodal log-normal distribution. Each of the four microphysical parameters (i.e. log-normal size distribution parameters, refractive index) are analysed separately, while the three others are remained set to constant reference values. Overall, the BC behaviour is not affected by the initial values taken as references. The total concentration (N₀) is the parameter to which BC is least sensitive, whereas it is most sensitive to the refractive index (m). A 2% variation of m induces a 15% variation of the lidar BC, while the uncertainty on the BC retrieval can also reach 15%. This result underlines the importance of having both an accurate lidar inversion method and a good knowledge of the temperature for size distribution retrieval techniques. The standard deviation (σ) is the second parameter to which BC is most sensitive to. Yet, the impact of m and σ on BC variations is limited by the realistic range of their variations. The mean radius (r_m) of the size distribution is thus the key parameter for BC, as it can vary several-fold. BC is most sensitive to the presence of large particles. The sensitivity of BC to r_m and σ variations increases when the initial size distributions are characterized by low r_m and large σ. This makes lidar more suitable to detect particles growing on background aerosols than on volcanic aerosols.     

Numerical Analysis of the Behavior of A New Aeronautical Alloy (Ti555-03) Under the Effect of A High-Speed Water Jet

In this paper, we present a numerical simulation of a water jet impacting a new aeronautical material Ti555-03 plate.The Computational Fluid Dynamics(CFD) behavior of the jet is investigated using a FV(Finite Volume) method.The Fluid–Structure Interaction(FSI) is studied using a coupled SPH(Smoothed Particle Hydrodynamics)-FE(Finite Element) method. The jets hit the metal sheet with an initial velocity 500 m/s. Two configurations which differ from each other by the position(angle of inclination) of the plate relatively to the axis of revolution of the jet inlet are investigated in this study. The objective of this study is to predict the impact of the fluid produced at high pressure and high speed especially at the first moment of impact. Numerical simulations are carried out under ABAQUS. We have shown in this study that the inclination of the titanium alloy plate by 45° stimulates the phenomenon of recirculation of water. This affects the velocity profile, turbulence and boundary layers in the impact zone. The stagnation zone and the phenomenon of water recirculation are strongly influenced by the slope of the plate which gives a pressure gradient and displacement very important between the two configurations. Fluctuations of physical variables(displacement and pressure) prove the need for a noise and vibratory study. These predictions will subsequently be used for the modeling of the problem of an orthogonal cut in a high-speed machining process assisted by high-pressure water jet.     

194.1 keV resonance contribution on 17O(p,α)14N reaction rate using R matrix code

Recently, a new resonance at E _Rlab =194.1 keV corresponding to a level in ¹⁸F at E _x =(5789.8±0.3) keV has been observed for the first time. In view of these new parameters, we propose here to examine this reaction using a numerical code based on the R-matrix method to show its contribution to the ¹⁷O(p,α)¹⁴N reaction rates. We also study the cross section as well as the differential cross section of the ¹⁷O(p,α)¹⁴N reaction. It is found that this resonance predominates the reaction rates in all the range of the stellar temperature for classical novae explosions. Our results are in good agreement with those of a recent experimental study.     

A model study of ATMOS observations and the heterogeneous loss of N2O5 by the sulphate aerosol layer

The heterogeneous removal of N₂O₅ by sulphuric acid aerosols as been invoked to explain the decline of mid-latitude ozone in the last decade. We have used a photochemical model to study measurements of odd-nitrogen made by Spacelab 3. The gas-phase photochemical model overestimates the amount of N₂O₅ present. The loss of N₂O₅ by aerosols does reduce N₂O₅, but is likely to be slower than assumed in WMO (1992). The sunset measurements at 25.5 km cannot be explained by heterogeneous loss of N₂O₅ and is more likely to be due to a faster photolysis than assumed. New absorption cross-sections of HNO₃ reduce the photolysis of HNO₃ so that the model with gas-phase chemistry only gives better agreement at 19 km, than a model including heterogeneous chemistry.     

Protonated Hydroxylamine-Assisted Iron Catalytic Activation of Persulfate for the Rapid Removal of Persistent Organics from Wastewater

This research aims at optimizing the effects of processing conditions, salts, natural organic materials, and water matrices quality on the effectiveness of the Fe(II)/K₂S₂O₈/hydroxylamine process in the degradation of pararosaniline. Assisting the Fe(II)/KPS (potassium persulfate) treatment with protonated hydroxylamine (H₃NOH⁺) increases the degradation rate of pararosaniline by more than 100%. Radical scavenger experiments show that the SO₄^●− radical dominates pararosaniline degradation in the Fe(II)/KPS system, whereas ^●OH is the dominant reactive species in the presence of H₃NOH⁺. The disparity in pararosaniline removal effectiveness upon the Fe(II)/KPS/H₃NOH⁺ and Fe(II)/KPS systems gets more significant with increasing reactants doses (i.e., H₃NOH⁺, H₂O₂, Fe(II)) and solution pH (2–7). Interestingly, H₃NOH⁺ increased the working pH to 6 instead of pH 4 for the Fe(II)/KPS process. Moreover, mineral anions such as Cl⁻, NO₃⁻, NO₂⁻, and SO₄⁻ (up to 10 × 10⁻³ m ) do not affect the efficiency of the Fe(II)/KPS/H₃NOH⁺ process. In contrast, acid humic decreases the performance of the process by ≈20%. In natural mineral water, treated wastewater, and river water samples, the Fe(II)/KPS/H₃NOH⁺ process maintains higher degradation performance (≈95%), whereas the process efficiency is greatly amortized in seawater. The efficiency of the Fe(II)/KPS process was drastically decreased in the various water matrices.     

Energy Performance Improvement of a Solar Still System Using Date and Olive Kernels: Experimental Study

Currently, solar distillation systems are used to contribute to solving the fresh water supply deficiency problem in some desert and rural areas. The present outdoor experimental work aims to improve the energy performance of a solar still installed in a semi-arid region. Experiments are performed using three solar distillers (a reference system, a distiller with date kernels, and one with olive kernels). The integration effect of two kernel types date and olive with different concentrations in the range of 300–600 g kernels per 5 L on the hourly and cumulus water production, and thermal and exergy efficiencies are analyzed. The results show that, for the same kernel mass concentration, the system with olive kernel is more effective than that with date kernels; moreover, compared to the reference system, cumulus water production of these systems at a mass concentration of 500 g kernels per 5 L is higher by ≈226% and 176%, respectively. At a concentration of 500 g kernels per 5 L, the average daily thermal efficiency of the solar still with olive kernels and that with date kernels is 38.01% and 30.7%, respectively, and their daily average exergy efficiency is 8.4% and 3.1%, respectively.     

Oxidative stress, genotoxicity and histopathology biomarker responses in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) liver from Bizerte Lagoon (Tunisia)

The aim of the study was to evaluate the impact of environmental contaminants on oxidative stress, genotoxic and histopathologic biomarkers in liver of mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) collected from a polluted coastal lagoon (Bizerte Lagoon) in comparison to a reference site (the Mediterranean Sea). Antioxidant enzyme activities were lower in fish from the polluted site compared with fish from the reference site, suggesting deficiency of the antioxidant system to compensate for oxidative stress. DNA damage was higher in both fish species from the contaminated site indicating genotoxic effects. The liver histopathological analysis revealed alterations in fish from Bizerte Lagoon. Hepatocytes from both fish species featured extensive lipid-type vacuolation and membrane disruption. Results suggest that the selected biomarkers in both fish species are useful for the assessment of pollution impacts in coastal environments influenced by multiple pollution sources.