Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

The Hα-cyclonic spectra of a flare loop system on 1981 April 27

The data such as the H-spectrum-spectroheliographic (SSHG) observations, the H-chromospheric observations, etc., of a flare loop prominence which occurred on the western solar limb on 1981 April 27 have been obtained at Yunnan Observatory. The distribution of the internal motions and the macroscopical motion of the flare loop prominence with time and space in the course of its eruption and ascension is derived from the comprehensive analysis of the data. The possible physical pictures and the instability of the motions of the loop are inferred and discussed.     

Wind wave-forced fine sediment erosion during the slack water periods in Hangzhou Bay,China

The shallow water wave simulation model-SWAN incorporated with a simple fine sediment erosion model is applied to Hangzhou Bay, China, to model the horizontal distribution of the maximum bottom orbital velocity and corresponding fine sediment erosion rates induced by: (1) southeasterly steady winds (5, 20 and 30 m/s), (2) southwesterly steady winds (5 and 20 m/s); (3) northwesterly steady winds (5 and 20 m/s); (4) east-southeasterly steady winds (5 and 20 m/s); (5) easterly steady winds (5 and 20 m/s) under closed and unclosed boundaries; and (6) unsteady winds during the slack water periods. Results suggest: (1) the steady wind wave-induced maximum bottom orbital velocities and corresponding fine sediment erosion rates generally increased with the increasing steady winds; (2) closed and unclosed boundary conditions had more significant influences on modeled fine sediment erosion rates under 5 m/s easterly steady winds than 20 m/s; and (3) steady and unsteady wind wave-induced maximum bottom currents could be significant in eroding fine sediment bed in Hangzhou Bay. The results show implications for geomorphology, sedimentology, coastal erosion, and environmental pollution mitigation in Hangzhou Bay.     

台湾附近海域黑潮表层流轴位置季节变异的探讨

起源于台湾东南和非律宾东北海域的黑潮,在沿台湾东岸北上的过程中,其表层流轴的位置有着明显的季节变异。本文根据所搜集到的资料(主要是GEK资料),粗略分析了台湾以东及东海南部海域黑潮表层流轴的季节变异,并对引起变异的原因作了初步探讨,认为季风和海底地形的共同作用,形成了该海域中黑潮特有的路径特征,而季风是引起黑潮表层流轴季节变异的主要原因。     

海底管道开沟机械的技术经济性能评定与选型

本文在对水下管道开沟机械的需求市场、实际应用和研制开发动向作深入调研的基础上，选择水下管道开沟机械特有的技术先进性、适用性、安全可靠性以及经济性评价指标，构造评价模型，对水下管道施工作业中广为应用的水力冲射开沟机械、海底管道犁、机械开沟机和土壤液化法埋管设备及其机型的技术经济性能作了较为详尽地分析对比及综合评价。在此基础上，笔者提出了水下管道开沟机械的一般选型原则和对我国海底管道开沟机械研究开发工     

渤海、黄海、东海水温垂直结构统计特征分析

渤海、黄海与东海的水温垂直结构呈现陆架浅海特有的水文特征，其分布与变化甚为复杂。几十年来，虽然中外海洋学家曾对这些海区水文要素的分布及其变异作过大量研究，但是，关于水温垂直结构各特征值较系统的分析研究则始于六十年代初期，毛汉礼等根据一年观测资料(1958-1959)作了较全面的阐述。但是这些资料多数是用颠倒温度表观测，少数为深度温度计(BT)观测；并且研究海区限千124°E以西。本文试图分析研究近年来渤海、黄海与东海水温垂直结构各特征值的统计特性；研究海区有了较大的扩展：黄海至124°30''E；东海至127°E。 文中引用国家海洋局1975一1980年间BT观测资料，共计166个观测站，累积约七千余个BT片资料。     

1990年12月14日台湾强震的预报判据

本文运用福建省沿海气象要素的异常变化,作台湾省的中、短期地震预报,取得了成功的效果。采用长乐历年各月14时最低气压的距平值,作台湾省未来4～7个月内出现强震的预报依据,并采用热异常进行短临跟踪。当秋冬季节连续4d 长乐、福州、台北的气温均比广州累计高出10℃时,预报未来1～5d 台湾省出现7级强震。又根据近百年来台湾发生的强震,统计其活动季节,得到近20年来7级地震发生的时间,绝大部分在9～12月。     

红树林遥感智能分类方法研究

利用ＧＩＳ信息中的红树林地域分布规律作向导，充分利用械树林区的光谱信息进行红树林植被信息提取。在对比研究常规的红树林图象自理方法的基础上，提出了适用于红树林植被信息遥感监测的智能分类方法。     

Static Analysis of Collision Strength of Offshore Platform

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.     

渤海湾海河口区耗氧有机物的分布特征

渤海湾海河口区是北京、天津二大城市工业及生活污水排放入海处，是一比较典型的海域。1972年以来曾对渤海湾进行过综合性的环境污染调查和研究，但由于受调查范围和项目的限制，对河口区特别是大沽口、北塘口区有机污染物的迁移转化研究甚少，尚不足以就有机污染对河口生态环境的潜在影响作出科学判断。目前，有机污染已成为海河口区特别是其附近大城市的主要污染问题之一。本文以化学耗氧量(COD)、生物耗氧量(BOD5)、溶解氧(DO)等项目作为耗氧有机物污染程度评价的主要指标(还有氮、磷、本集另有专文讨论)，对海河口区有机污染物的迁移、转化及生态效应进行了调查研究，为有机污染评价提供数据并作初步探讨。