A Procedure for Determining the Reaction Curve of Shotcrete Lining Considering Transient Conditions

Summary The mechanical behaviour of a shotcrete lining is analysed in this paper using the convergence-confinement approach. A calculation procedure is presented which is able to provide the reaction curve of a lining with increasing stiffness, by taking into account the variability due to time of the shotcrete stiffness and strength, as well as the face advancement rate. The proposed procedure is also able to provide the change of the safety factor of the lining in time. This results to be a very useful tool for understanding the behaviour of this widely used support and for assigning its thickness to guarantee stability (also in transient conditions), with a known safety factor, during tunnel excavation. Received May 25, 2001; accepted July 18, 2002; Published online January 21, 2003 Acknowledgements The author would like to thank Prof. S. Pelizza and Dr. S. Xu for the help given during the preparation of this paper. The help of the Editor G. Barla is also acknowledged. Authors' address: Dr. P. P. Oreste, Department of Earth Resources and Land, Politecnics di Torino, corso Duca degli Abruzzi 24, 1-10129 Torino, Italy; e-mail: oreste@polito.it     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

TRACE-derived Temperature and Emission Measure Profiles along Long-lived Coronal Loops: The Role of Filamentation

Near-infrared spectroscopic observations of a sample of very cool, low-mass objects are presented with higher spectral resolution than in any previous studies. Six of the objects are L dwarfs, ranging in spectral class from L2 to L8/9, and the seventh is a methane or T dwarf. These new observations were obtained during commissioning of the near-infrared spectrometer (NIRSPEC), the first high-resolution near-infrared cryogenic spectrograph for the Keck II 10 m telescope on Mauna Kea, Hawaii. Spectra with a resolving power of R approximately 2500 from 1.135 to 1.360 μm (approximately J band) are presented for each source. At this resolution, a rich spectral structure is revealed, much of which is due to blending of unresolved molecular transitions. Strong lines due to neutral potassium (K i) and bands due to iron hydride (FeH) and steam (H2O) change significantly throughout the L sequence. Iron hydride disappears between L5 and L8, the steam bands deepen, and the K i lines gradually become weaker but wider because of pressure broadening. An unidentified feature occurs at 1.22 μm that has a temperature dependence like FeH but has no counterpart in the available FeH opacity data. Because these objects are 3-6 mag brighter in the near-infrared compared with the I band, spectral classification is efficient. One of the objects studied (2MASSW J1523+3014) is the coolest L dwarf discovered so far by the 2 Micron All-Sky Survey (2MASS), but its spectrum is still significantly different from the methane-dominated objects such as Gl 229B or SDSS 1624+0029.     

A minimal dynamical model for tidal synchronization and orbit circularization

We study tidal synchronization and orbit circularization in a minimal model that takes into account only the essential ingredients of tidal deformation and dissipation in the secondary body. In previous work we introduced the model (Escribano et al. in Phys. Rev. E, 78:036216, 2008); here we investigate in depth the complex dynamics that can arise from this simplest model of tidal synchronization and orbit circularization. We model an extended secondary body of mass m by two point masses of mass m/2 connected with a damped spring. This composite body moves in the gravitational field of a primary of mass M ≫ m located at the origin. In this simplest case oscillation and rotation of the secondary are assumed to take place in the plane of the Keplerian orbit. The gravitational interactions of both point masses with the primary are taken into account, but that between the point masses is neglected. We perform a Taylor expansion on the exact equations of motion to isolate and identify the different effects of tidal interactions. We compare both sets of equations and study the applicability of the approximations, in the presence of chaos. We introduce the resonance function as a resource to identify resonant states. The approximate equations of motion can account for both synchronization into the 1:1 spin-orbit resonance and the circularization of the orbit as the only true asymptotic attractors, together with the existence of relatively long-lived metastable orbits with the secondary in p:q (p and q being co-prime integers) synchronous rotation.     

2D Tunnel Numerical Investigation: The Influence of the Simplified Excavation Method on Tunnel Behaviour

Tunnel excavation is a three-dimensional (3D) problem. However, despite recent advances in computing resources, 3D models are still computationally inefficient and two-dimensional (2D) simulations are therefore often used. Modelling the tunnelling process in a 2D plane strain analysis requires a specific approach that allows a 3D tunnelling effect to be taken into consideration. As far as the urban tunnels are concerned, most cases reported in the literature have focused on estimating the applicability of these equivalent approaches that are based on the evaluation of the settlement that develops on the ground surface, without considering the influence of segment joints. The main objective of this study was to provide a 2D numerical investigation to highlight the influence of two equivalent approaches, that is, the convergence-confinement method (CCM) and the volume loss method (VLM), on the behaviour of a tunnel built in an urban area, in terms of not only the surface settlement but also the structural lining forces, taking into account the effect of segment joints. A technique that can be used to simulate the tunnel wall displacement process, based on the principles of the VLM, has been developed using the FLAC^3D finite difference program (Itasca in FLAC fast Lagrangian analysis of continua, version 4.0; User’s manual, http.itascacg.com, 2009). A comparison with 3D numerical results has been introduced to estimate the precision of these 2D equivalent approaches. The results have shown a significant influence of the tunnel boundary deconfinement technique and segment joints on the tunnel lining behaviour and surface settlements. The structural forces obtained by means of the CCM are often smaller than those determined with the VLM for the same surface settlement. Generally, the structural lining forces determined by the CCM are in better agreement with the 3D numerical results than the ones obtained with the VLM. However, in order to obtain an accurate estimation of the structural forces, the impact of the construction loads during tunnelling should be taken into account.     

Inclination of large coronal loops observed by TRACE

A TRACE field of view well inside the solar disk shows very well defined large loops, likely to be very inclined to the solar surface. On the other hand there is little evidence of large loops perpendicular to the solar surface. We show that this does not mean that most large loops have such large inclination but that perpendicular loops are much less visible to TRACE, because of density stratification. We quantitatively evaluate this effect by modeling in detail loops with different inclinations.     

Convergence-control approach for rock tunnels reinforced by grouted bolts,using the homogenization concept

The scope of this paper is to introduce a method for the analysis of rock tunnels reinforced by grouted bolts, based on the convergence-control approach. The analytical formulations presented in this paper refers to an elasto-plastic behavior of the rock mass and the latest Hoek and Brown yield criterion (Version 2002). In order to model the reinforced plastic zone, the equivalent material approach was taken into account such that the apparent strength of the rock mass is improved as a consequence of the bolting effect. The general design guides and examples presented are intended to facilitate the comprehension and application of the proposed analytical solution in practice.     

Environmental impacts of household appliances in Europe and scenarios for their impact reduction

Assessing the environmental impact due to consumption of goods and services is a pivotal step towards achieving the sustainable development goal related to responsible production and consumption (i.e. SDG 12). Household appliances plays a crucial role and should be assessed in a systemic manner, namely considering all life cycle stages, technological efficiency, and affluence aspects. The present study assess the impact of such household appliances used in Europe, and tests scenarios of potential impact reduction at various scales. Life cycle assessment is applied to 14 different household appliances (ranging from dishwashers to television devices) selected to build a set of representative products, based on their economic value and diffusion in households in Europe. Related impacts are calculated with the Environmental Footprint method for calculating a Consumer Footprint “appliances” for the baseline year 2010. A number of scenarios encompassing eco-solutions on a technical level, changes in consumption pattern, behavioral changes, as well as the combination of all these aspects are run to estimate the Consumer Footprint related to household appliances for the year 2030, compared against this baseline scenario. The baseline Consumer Footprint is confirming the importance of the use phase in leading the impacts in almost all impact categories. Testing different scenarios concludes that there is a reduction of the impact for most of the categories (with up to 67% for the ozone depletion potential, and still around 35% for the global warming potential), while two of the here examined impact categories (i.e. land-use and mineral resource depletion) show an overall potential that is even negative – i.e. the results of all scenarios are higher than the ones of the 2010 baseline scenario. The increase in purchase and use of such appliances may offset energy efficiency benefits in some of the examined categories. Hence, the assessment of sustainability of appliances consumption should always include several scales, from the efficiency of the products (micro scale), to the improvement of the energy mix (meso scale), up to accounting for socio-economic drivers and patterns of consumption affecting the overall appliances stock (macro scale).     

Environmental impacts of household appliances in Europe and scenarios for their impact reduction

Assessing the environmental impact due to consumption of goods and services is a pivotal step towards achieving the sustainable development goal related to responsible production and consumption (i.e. SDG 12). Household appliances plays a crucial role and should be assessed in a systemic manner, namely considering all life cycle stages, technological efficiency, and affluence aspects. The present study assess the impact of such household appliances used in Europe, and tests scenarios of potential impact reduction at various scales. Life cycle assessment is applied to 14 different household appliances (ranging from dishwashers to television devices) selected to build a set of representative products, based on their economic value and diffusion in households in Europe. Related impacts are calculated with the Environmental Footprint method for calculating a Consumer Footprint “appliances” for the baseline year 2010. A number of scenarios encompassing eco-solutions on a technical level, changes in consumption pattern, behavioral changes, as well as the combination of all these aspects are run to estimate the Consumer Footprint related to household appliances for the year 2030, compared against this baseline scenario. The baseline Consumer Footprint is confirming the importance of the use phase in leading the impacts in almost all impact categories. Testing different scenarios concludes that there is a reduction of the impact for most of the categories (with up to 67% for the ozone depletion potential, and still around 35% for the global warming potential), while two of the here examined impact categories (i.e. land-use and mineral resource depletion) show an overall potential that is even negative – i.e. the results of all scenarios are higher than the ones of the 2010 baseline scenario. The increase in purchase and use of such appliances may offset energy efficiency benefits in some of the examined categories. Hence, the assessment of sustainability of appliances consumption should always include several scales, from the efficiency of the products (micro scale), to the improvement of the energy mix (meso scale), up to accounting for socio-economic drivers and patterns of consumption affecting the overall appliances stock (macro scale).