青海南部熔积岩的发现:对寻找VMS型矿床的重要启示

熔积岩指的是侵入、混合到未固结或弱固结的湿沉积物中的熔浆分解、原位形成的一类特殊岩石。正确地认识该类岩石,有利于增进人们对岩浆-水(沉积物)相互作用过程的理解,恢复古环境。在青海南部沱沱河地区发现了一套角砾为撕片状、锯齿状及浑圆状的安山岩,胶结物为铁硅质组合的特殊熔积岩。研究表明,该熔积岩的角砾为岩浆遇水后快速淬火、裂解的产物,铁硅质组合为海底喷气沉积形成的含铁建造;且安山岩与含铁建造发生混合时,含铁建造尚未固结。该套熔积岩的发现,改变了长期以来对开心岭铁矿为火山热液交代安山岩而形成的认识,对于在矿区寻找VMS型矿床、区域内寻找海底热水喷流沉积型矿床具有重要的启示意义。     

The vibrational frequencies of forsterite Mg2SiO4: an all-electron ab initio study with the CRYSTAL code

The vibrational spectrum of Mg₂SiO₄ olivine was calculated at the Γ point by using the periodic ab initio CRYSTAL program. An all electron localized Gaussian-type basis set and the B3LYP Hamiltonian were employed. The full set of frequencies (35 IR active, 36 Raman active, 10 “silent” modes) was computed and compared to experimental data from different sources (four for IR and four for Raman). A generally good agreement is observed with experiment (the mean absolute difference ranging from 7 to 10 cm⁻¹ for the various sets), when some of the experimental frequencies, whose attribution is uncertain or appears to be affected by large errors, are not taken into account. A small number of observed peaks are not consistent with calculated frequencies, and a few theoretical peaks do not correspond to measured values. The implications are discussed in detail. The full set of modes are characterized using different tools, namely isotopic substitution, direct inspection of the eigenvectors and graphical representation, so as to obtain a consistent mode assignment.     

Paleoliquefaction study of the Clarendon–Linden fault system, western New York State

The lack of earthquake-induced liquefaction features in Late Wisconsin and Holocene sediments in Genesee, Wyoming, and Allegany Counties suggests that the Clarendon–Linden fault system (CLF) did not generate large, moment magnitude, M≥6 earthquakes during the past 12,000 years. Given that it was the likely source of the 1929 M 4.9 Attica earthquake, however, the Clarenden–Linden fault system probably is capable of producing future M5 events. During this study, we reviewed newspaper accounts of the 1929 Attica earthquake, searched for earthquake-induced liquefaction features in sand and gravel pits and along tens of kilometers of river cutbanks, evaluated numerous soft-sediment deformation structures, compiled geotechnical data and performed liquefaction potential analysis of saturated sandy sediments. We found that the 1929 M 4.9 Attica earthquake probably did not induce liquefaction in its epicentral area and may have been generated by the western branch of the Clarendon–Linden fault system. Most soft-sediment deformation structures found during reconnaissance did not resemble earthquake-induced liquefaction features, and even the few that did could be attributed to non-seismic processes. Our analysis suggests that the magnitude threshold for liquefaction is between M 5.2 and 6, that a large (M≥6) earthquake would liquefy sediments at many sites in the area, and that a moderate earthquake (M 5–5.9) would liquefy sediments at some sites but perhaps not at enough sites to have been found during reconnaissance. We conclude that the Clarendon–Linden fault system could have produced small and moderate earthquakes, but probably not large events, during the Late Wisconsin and Holocene.     

Epithermal environments and styles of mineralization: Variations and their causes, and guidelines for exploration

Epithermal precious- and base-metal deposits are diverse, reflecting the different tectonic, igneous and structural settings in which they occur, the complexities of their local setting, and the many processes involved in their formation. Most epithermal deposits form at shallow crustal levels where abrupt changes in physical and chemical conditions result in metal deposition and attendant hydrothermal alteration. The principal factors that influence the conditions prevailing in the epithermal environment, and which ultimately determine the sites and character of mineralization, include: geology (structure, stratigraphy, intrusions and rock type, which affect the style and degree of permeability and the reactivity of the host); pressure and temperature (which in the epithermal environment are related on the boiling point with depth curve); hydrology (the relationship between permeability and topography which governs fluid flow, and discharge/recharge characteristics, as well as access of steam-heated waters); chemistry of the mineralizing fluid (which determines the metal-carrying capacity, as well as the associated vein and alteration assemblage); and syn-hydrothermal development of permeability and/or changes in hydraulic gradients.Many attempts have been made to classify epithermal deposits based on mineralogy and alteration, the host rocks, deposit form, genetic models, and standard deposits. All have their strengths and weaknesses. We prefer a simple approach using the fundamental fluid chemistry (high or low sulfidation, reflecting relatively oxidized or reduced conditions, respectively) as readily inferred from vein and alteration mineralogy and zoning, together with the form of the deposit, and using comparative examples to clarify the character of the deposit.Guidelines for exploration vary according to the scale at which work is conducted, and are commonly constrained by a variety of local conditions. On a regional scale the tectonic, igneous and structural settings can be used, together with assessment of the depth of erosion, to select areas for project area scale exploration. At project area scale, direct (i.e. geochemical) or indirect guidelines may be used. Indirect methods involve locating and interpreting hydrothermal alteration as a guide to ore, with the topographic and hydrologic reconstruction of the system being of high priority. These pursuits may involve mineralogic, structural, geophysical or remote sensing methods. On a prospect scale, both direct and indirect methods may be used; however, they can only be effective in the framework of a sound conceptual understanding of the processes that occur in the epithermal environment, and the signatures they leave.     

Fitting variogram models by weighted least squares

The method of weighted least squares is shown to be an appropriate way of fitting variogram models. The weighting scheme automatically gives most weight to early lags and down-weights those lags with a small number of pairs. Although weights are derived assuming the data are Gaussian (normal), they are shown to be still appropriate in the setting where data are a (smooth) transform of the Gaussian case. The method of (iterated) generalized least squares, which takes into account correlation between variogram estimators at different lags, offer more statistical efficiency at the price of more complexity. Weighted least squares for the robust estimator, based on square root differences, is less of a compromise.     

Robust kriging—A proposal

Geological data frequently have a heavy-tailed normal-in-the-middle distribution, which gives rise to grade distributions that appear to be normal except for the occurrence of a few outliers. This same situation also applies to log-transformed data to which lognormal kriging is to be applied. For such data, linear kriging is nonrobust in that (1)kriged estimates tend to infinity as the outliers do, and (2)it is also not minimum mean squared error. The more general nonlinear method of disjunctive kriging is even more nonrobust, computationally more laborious, and in the end need not produce better practical answers. We propose a robust kriging method for such nearly normal data based on linear kriging of an editing of the data. It is little more laborious than conventional linear kriging and, used in conjunction with a robust estimator of the variogram, provides good protection against the effects of data outliers. The method is also applicable to time series analysis.     

Carbon reduction, 'the public' and renewable energy: engaging with socio-technical configurations

In the context of challenging targets for renewable energy generation, this paper draws out social implications of moves towards low carbon energy systems. As renewable energy develops as a heterogeneous category, many potential forms of social relation between 'publics' and technologies are emerging. Utilising perspectives from science and technology studies, we outline five modes in which renewable energy has been implemented in the UK and how these involve different configurations of technology and social organisation. We argue that a multiplicity of roles for 'the public' are implicated across this increasingly complex landscape, cutting across established categories and raising questions of meaning, differentiation, interrelation and access. Policy assumptions and conceptions are questioned, highlighting that dominant characterisations of public roles have been part of a concentration on particular socio-technical pathways to the exclusion of others.     

When are relative variograms useful in geostatistics?

The relative variogram has been employed as a tool for correcting a simple kind of nonstationarity, namely that in which local variance is proportional to local mean squared. In the past, this has been linked in a vague way to the lognormal distribution, although if {Z_t; t D}is strongly stationary and normal over a domain D,then clearly {exp (Z_t); t D}will stillbe stationary, but lognormal. The appropriate link is made in this article through a universal transformation principle. More general situations are considered, leading to the use of a scaled variogram.     

Arctic sea ice and Eurasian climate: A review

The Arctic plays a fundamental role in the climate system and has shown significant climate change in recent decades,including the Arctic warming and decline of Arctic sea-ice extent and thickness. In contrast to the Arctic warming and reduction of Arctic sea ice, Europe, East Asia and North America have experienced anomalously cold conditions, with record snowfall during recent years. In this paper, we review current understanding of the sea-ice impacts on the Eurasian climate.Paleo, observational and modelling studies are covered to summarize several major themes, including: the variability of Arctic sea ice and its controls; the likely causes and apparent impacts of the Arctic sea-ice decline during the satellite era,as well as past and projected future impacts and trends; the links and feedback mechanisms between the Arctic sea ice and the Arctic Oscillation/North Atlantic Oscillation, the recent Eurasian cooling, winter atmospheric circulation, summer precipitation in East Asia, spring snowfall over Eurasia, East Asian winter monsoon, and midlatitude extreme weather; and the remote climate response(e.g., atmospheric circulation, air temperature) to changes in Arctic sea ice. We conclude with a brief summary and suggestions for future research.