Capture of particles in hypervelocity impacts in aerogel

Abstract— The capture in aerogel of 106 μm diameter glass beads is investigated for impact speeds of 1 to 7.5 km s^?1. Three different aerogel densities were used, 60,96 and 180 kg m^?3. It was found that the length of the penetration track in the aerogel increases with speed until a maximum is reached. Above the maximum speed the track length decreases. This behaviour is similar to that which has previously been observed for particles impacting polystyrene foams and porous alumina. Whilst track length was not found to be an unambiguous indicator of impact speed, the excavated track volume was found to be a suitable indictor of speed. Further, it was possible to estimate the original particle size by measurements of the track volume and entrance hole size. In addition sub‐100 μm diameter particles composed of various minerals were fired into aerogel and the characterisation of the particles in situ by use of a Raman spectrometer was evaluated. This was found to work well, giving vibrational spectra essentially similar to those of the bulk minerals, thus providing a mineralogical rather than an elemental signature for the captured particles.     

Upper Ocean Temperatures Hit Record High in 2020

The long-term warming of the ocean is a critical indicator of both the past and present state of the climate system. It also provides insights about the changes to come, owing to the persistence of both decadal variations and secular trends,which the ocean records extremely well(Hansen et al., 2011;IPCC, 2013;Rhein et al., 2013;Trenberth et al., 2016;Abram et al., 2019).     

RAPID ESTIMATION OF THE NUMBER OF COELUTING COMPONENTS IN LIQUID CHROMATOGRAPHY BY FACTOR ANALYSIS

Evaluation of the results of factor analysis of sets of spectroscopically detected chromatograms is carriedout by examining the shapes of the abstract factors.This is done either by visual inspection or by analysisof the power density spectra produced from them.Owing to constraints imposed by the column functionand the spectroscopic instrument function,the information content of the chromatograms necessarilyoccurs at low spatial frequencies.As a consequence,it appears as relatively broad features in the abstractchromatograms and as a peak in the low-frequency region of the corresponding power density plot.Onthe basis of examination of the power density distribution,a well-defined distinction is made betweenprimary and secondary abstract factors.The major uncertainty encountered in determining the numberof chemical components appears to arise from effects of contaminants in reagents.     

Exhumation of the Dayman dome metamorphic core complex, eastern Papua New Guinea

The ～750 km² Dayman dome of the Late Cretaceous Suckling‐Dayman massif, eastern Papua New Guinea, is a domed landform that rises to an elevation of 2850 m. The northern edge of the dome is a fault scarp >1000 m high that is now part of an active microplate boundary separating continental crust of the New Guinea highlands from continental and oceanic crust of the Woodlark microplate. Previous work has shown that a parallel belt of eclogite‐bearing core complexes north‐east of the Dayman dome were exhumed from up to 24–28 kbar in the last few millions of years. The remarkably fresh and lightly eroded scarp of the Dayman dome exposes shallowly‐dipping mylonitic (S1) metabasite rocks (500 m thick) on the northern flank of Mount Dayman. Field relationships near the base of this scarp show a cross cutting suite of ductile and brittle meso‐structures that includes: (i) rare ductile S2 folia with a shallowly ESE‐plunging mineral elongation lineation defined by sodic‐calcic blue amphibole; (ii) narrow steeply‐dipping ductile D2 shear zones; and (iii) semi‐brittle to brittle fault zones. Pumpellyite‐actinolite facies assemblages reported by previous workers to contain local aragonite, lawsonite and/or glaucophane are found in the core of the complex at elevations greater than 2000 m. These assemblages indicate peak metamorphic pressures of 6–9.5 kbar, demonstrating exhumation of the core of the Dayman dome from depths of 20–30 km. The S1 metamorphic mineral assemblage in metabasite includes actinolite‐chlorite‐epidote‐albite‐quartz‐calcite‐titanite, indicative of greenschist facies conditions for the main deformation. New mineral equilibria modelling suggests that this S1 assemblage evolved at 5.9–7.2 kbar at ～425 °C. Modelling variable Fe³⁺ indicates that the sodic‐calcic blue amphibole (D2) formed under a higher oxidation state compared with the S1 assemblage, probably at <4.5 kbar. A SE‐dipping, Mio‐Pliocene sedimentary sequence (Gwoira Conglomerate) forms a hangingwall block juxtaposed by low‐angle fault contact with the metabasite footwall. Prehnite‐bearing D3 brittle fault zones separate the two blocks and likely accommodated the final exhumation of the S1 greenschist facies assemblage in the footwall. These results indicate that the extensive Mt Dayman fault surface coincides with a domed S1 greenschist facies foliation that was last active at >20 km depth. Exhumation of this foliation must therefore be controlled by brittle faults of the active microplate boundary that are largely not observed in the study area. The structural record of the final exhumation of the Dayman dome to the surface was likely lost as a result of erosion, poor exposure or wide spacing of semi‐brittle to brittle fault zones.     

Another Year of Record Heat for the Oceans

Changes in ocean heat content(OHC), salinity, and stratification provide critical indicators for changes in Earth’s energy and water cycles. These cycles have been profoundly altered due to the emission of greenhouse gasses and other anthropogenic substances by human activities, driving pervasive changes in Earth’s climate system. In 2022, the world’s oceans, as given by OHC, were again the hottest in the historical record and exceeded the previous 2021 record maximum.According to IAP/CAS data, ...     

Geochemical Stratigraphy and Microvertebrate Assemblage Sequences across the Silurian/Devonian Transition in South China

Carbon isotope (δ13Corg) analyses of non-marine clastic rocks and neritic carbonates and black shales spanning the Silurian/Devonian transition are compared from two richly fossiliferous sequences in Qujing of East Yunnan and Zoige of Sichuan, South China. The two sections, Xishancun and Putonggou sections in South China, reveal positive δ13Corg shifts happening in the Upper Pridoli and Lower Devonian and reaching peak values as heavy as ?25.2‰ (Xishancun) and ?19.9‰ (Putonggou) in the lowermost Lochkovian following the first occurrence of the thelodont Parathelodus and the conodont Icriodus woschmidti woschmidti (only in Putonggou Section and together with Protathyris-Lanceomyonia brachiopod fauna). These results replicate a globally known positive shift in δ13Corg from the uppermost Silurian to the lowermost Devonian. The δ13Corg variations across the Silurian/Devonian Boundary (SDB) at the two sections in South China exhibit a shift in carbon isotopic composition similar to the detailed SDB curves from the borehole Klonk-1 drilled at top of the Klonk Global Standard Stratotype-Section and Point (GSSP) in the Prague Basin, Czech Republic. In addition, four microvertebrate assemblages, including the Liaojiaoshan, Xishancun, Yanglugou and Xiaputonggou assemblages, are recognized from the Silurian/Devonian transition exposed in the Xishancun and Putonggou sections, respectively. The results from both carbon isotope stratigraphy and microvertebrate assemblage sequences suggest that the SDB in South China is located at the base of the Xishancun Formation (between sample QX-20 and sample QX-21) in the Xishancun Section and the lower part of the Xiaputonggou Formation (between sample ZP-09 and sample ZP-10) in the Putonggou Section. The isotopic trend for organic carbon together with the changes of microvertebrate remains across the SDB can offer an approach to a potential correlation of the SDB from different sedimentary facies, which help to correlate the marine with non-marine deposits.     

Quaternary glaciations of the Rongbuk Valley,Tibet

Randomisation tests on boulder weathering data distinguish moraines of four different ages in the Rongbuk Valley, all deposited by valley glaciers flowing northward into Tibet from the Himalaya. Lichenometry utilising subgenus Rhizocarpon distinguishes two groups of moraines, those <100 yr old and those older than several thousand years. The degree of soil development has a similar, limited utility in relative-age dating these moraines. The radiocarbon ages of calcium carbonate coatings in the lower horizons of moraine soils provide minimum-limiting ages of 1900 yr BP for the penultimate advance of the Rongbuk glacier (Samdopo moraine) and 9500 yr BP for the Rongbuk moraine, the moraine suggested by previous workers to represent the last glacial maximum. Equilibrium-line depression associated with the Rongbuk moraine probably was slight, <200 m. The small magnitude of this depression relative to glaciers in other mountain ranges could relate to a weakening of the monsoon in full glacial times, recent tectonic uplift, and/or to the insensitivity of these high-altitude glaciers to lowering temperatures in the rain shadow of Mount Everest.     

Anatomy of a subaqueous ice-contact fan and delta complex, Middle Pleistocene, North-west Germany

This paper presents a detailed analysis of the high‐resolution facies architecture of the Middle Pleistocene Porta subaqueous ice‐contact fan and delta complex, deposited on the northern margin of glacial Lake Weser (North‐west Germany). A total of 10 sand and gravel pits and more than 100 wells were examined to document the complex facies architecture. The field study was supplemented with a ground‐penetrating radar survey and a shear‐wave seismic survey. All collected sedimentological and geophysical data were integrated into a high‐resolution three‐dimensional geological model for reconstructing the spatial distribution of facies associations. The Porta subaqueous fan and delta complex consist of three fan bodies deposited on a flat lake‐bottom surface at the margin of a retreating ice lobe. The northernmost fan complex is up to 55 m thick, 6·2 km wide and 6·5 km long. The incipient fan deposition is characterized by high‐energy flows of a plane‐wall jet. Very coarse‐grained, highly scoured jet‐efflux deposits with an elongate plan shape indicate a high Froude number, probably >5. These jet‐efflux sediments are deposited in front of a large ～3·2 km long, up to 1·2 km wide, and up to 25 m deep flute‐like scour, indicating the most proximal erosion and bypass area of the jet that widens and deepens with distance downstream to the region of maximum turbulence (approximately five times the conduit diameter). Evidence for subsequent flow splitting is given by the presence of two marginal gravel fan lobes, deposited in front of 1·3 to 2·5 km long flute‐like scours, that are 0·8 to 1 km wide and 7 to 20 m deep. In response to continued aggradation, small jets developed at the periphery of these bar‐like deposits and filled in the low areas adjacent to the original superelevated regions, locally raising the depositional surface and characterized by large‐scale trough cross‐stratified sand and pebbly sand. The incision of an up to 1·2 km wide and up to 35 m deep channel into the evolving fan is attributed to a catastrophic drainage event, probably related to a lake outburst and lake‐level fall in the range of 40 to 60 m. At the mouth of this channel, highly scoured jet‐efflux deposits formed under hydraulic‐jump conditions during flow expansion. Subsequently, Gilbert‐type deltas formed on the truncated fan margin, recording a second lake‐level drop in the range of 30 to 40 m. These catastrophic lake‐level falls were probably caused by rapid ice‐lobe retreat controlled by the convex‐up bottom topography of the ice valley.