Relative timing of deformation and two-stage gold mineralization at the Hutti Mine, Dharwar Craton, India

Gold mineralization at Hutti is confined to a series of nine parallel, N–S to NNW–SSE trending, steeply dipping shear zones. The host rocks are amphibolites and meta-rhyolites metamorphosed at peak conditions of 660±40°C and 4±1 kbar. They are weakly foliated (S₁) and contain barren quartz extension veins. The auriferous shear zones (reefs) are typically characterized by four alteration assemblages and laminated quartz veins, which, in places, occupy the entire reef width of 2–10 m, and contain the bulk of gold mineralization. A <1.5 m wide distal chlorite-sericite (+biotite, calcite, plagioclase) alteration zone can be distinguished from a 3–5 m wide proximal biotite-plagioclase (+quartz, muscovite, calcite) alteration zone. Gold is both spatially and temporally associated with disseminated arsenopyrite and pyrite mineralization. An inner chlorite-K-feldspar (+quartz, calcite, scheelite, tourmaline, sphene, epidote, sericite) alteration halo, which rims the laminated quartz veins, is characterized by a pyrrhotite, chalcopyrite, sphalerite, ilmenite, rutile, and gold paragenesis. The distal chlorite-sericite and proximal biotite-plagioclase alteration assemblages are developed in microlithons of the S₂–S₃ crenulation cleavage and are replaced along S₃ by the inner chlorite-K-feldspar alteration, indicating a two-stage evolution for gold mineralization. Ductile D₂ shearing, alteration, and gold mineralization formed the reefs during retrograde evolution and fluid infiltration under upper greenschist to lower amphibolite facies conditions (560±60°C, 2±1 kbar). The reefs were reactivated in the D₃ dextral strike-slip to oblique-slip environment by fault-valve behavior at lower greenschist facies conditions (ca. 300–350°C), which formed the auriferous laminated quartz veins. Later D₄ crosscutting veins and D₅ faults overprint the gold mineralization. The alteration mineralogy and the structural control of the deposit clearly points to an orogenic style of gold mineralization, which took place either during isobaric cooling or at different levels of the Archean crust. From overlaps in the tectono-metamorphic history, it is concluded that gold mineralization occurred during two tectonic events, affecting the eastern Dharwar craton in south India between ca. 2550 – 2530 Ma: (1) The assemblage of various terranes of the eastern block, and (2) a tectono-magmatic event, which caused late- to posttectonic plutonism and a thermal perturbation. It differs, however, from the pre-peak metamorphic gold mineralization at Kolar and the single-stage mineralization at Ramagiri. Notably, greenschist facies gold mineralization occurred at Hutti 35–90 million years later than in the western Dharwar craton. Editorial handling: G. Beaudoin     

A reconstruction of Archean biological diversity based on molecular fossils from the 2.78 to 2.45 billion-year-old Mount Bruce Supergroup, Hamersley Basin, Western Australia

Bitumens extracted from 2.7 to 2.5 billion-year-old (Ga) shales of the Fortescue and Hamersley Groups in the Pilbara Craton, Western Australia, contain traces of molecular fossils. Based on a combination of molecular characteristics typical of many Precambrian bitumens, their consistently and unusually high thermal maturities, and their widespread distribution throughout the Hamersley Basin, the bitumens can be characterized as ‘probably of Archean age’. Accepting this interpretation, the biomarkers open a new window on Archean biodiversity. The presence of hopanes in the Archean rocks confirms the antiquity of the domain Bacteria, and high relative concentrations of 2α-methylhopanes indicate that cyanobacteria were important primary producers. Oxygenic photosynthesis therefore evolved > 2.7 Ga ago, and well before independent evidence suggests significant levels of oxygen accumulated in the atmosphere. Moreover, the abundance of cyanobacterial biomarkers in shales interbedded with oxide-facies banded iron formations (BIF) indicates that although some Archean BIF might have been formed by abiotic photochemical processes or anoxygenic phototrophic bacteria, those in the Hamersley Group formed as a direct consequence of biological oxygen production. Biomarkers of the 3β-methylhopane series suggest that microaerophilic heterotrophic bacteria, probably methanotrophs or methylotrophs, were active in late Archean environments. The presence of steranes in a wide range of structures with relative abundances like those from late Paleoproterozoic to Phanerozoic sediments is convincing evidence for the existence of eukaryotes in the late Archean, 900 Ma before visible fossil evidence indicates that the lineage arose. Sterol biosynthesis in extant eukaryotes requires molecular oxygen. The presence of steranes together with biomarkers of oxygenic photosynthetic cyanobacteria suggests that the concentration of dissolved oxygen in some regions of the upper water column was equivalent to at least ∼1% of the present atmospheric level (PAL) and may have been sufficient to support aerobic respiration.     

Near-infrared imaging in H2 of molecular (CO) outflows from young stars

We have imaged several known molecular (CO) outflows in H₂ v=1-0 S(1) and wide-band K in order to identify the molecular shocks associated with the acceleration of ambient gas by outflows from young stars. We detected H₂ line emission in all the flows we observed: L 1157, VLA 1623, NGC 6334I, NGC 2264G, L 1641N and Haro 4-255. A comparison of the H₂ data with CO outflow maps strongly suggests that prompt entrainment near the head of a collimated jet probably is the dominant mechanism for producing the CO outflows in these sources.     

Dynamics of the circulation in the Sea of Marmara: numerical modeling experiments and observations from the Turkish straits system experiment

During September 2008 and February 2009, the NR/V Alliance extensively sampled the waters of the Sea of Marmara within the framework of the Turkish Straits System (TSS) experiment coordinated by the NATO Undersea Research Centre. The observational effort provided an opportunity to set up realistic numerical experiments for modeling the observed variability of the Marmara Sea upper layer circulation at mesoscale resolution over the entire basin during the trial period, complementing relevant features and forcing factors revealed by numerical model results with information acquired from in situ and remote sensing datasets. Numerical model solutions from realistic runs using the Regional Ocean Modeling System (ROMS) produce a general circulation in the Sea of Marmara that is consistent with previous knowledge of the circulation drawn from past hydrographic measurements, with a westward meandering current associated with a recurrent large anticyclone. Additional idealized numerical experiments illuminate the role various dynamics play in determining the Sea of Marmara circulation and pycnocline structure. Both the wind curl and the strait flows are found to strongly influence the strength and location of the main mesoscale features. Large displacements of the pycnocline depth were observed during the sea trials. These displacements can be interpreted as storm-driven upwelling/downwelling dynamics associated with northeasterly winds; however, lateral advection associated with flow from the Straits also played a role in some displacements.     

Determination of deployment specific chemical uptake rates for SPMD and PDMS using a passive flow monitor

Passive sampling techniques facilitate the time-integrated measurement of pollutant concentrations through the use of a selective receiving phase. Accurate quantification using passive sampling devices rely on the implementation of methods that will negate the effects of environmental factors (flow, temperature, etc.) or that will allow the calculation of the chemical specific rates of uptake (R(s)) into the passive sampler employed. We have applied an in situ calibration technique based on the dissolution of gypsum to measure the average water velocity to which a sampler has been exposed. We demonstrate that the loss of gypsum from the passive flow monitor (PFM) can be applied to predict changes in R(s) dependent on flow when using the absorbent SPMD (semipermeable membrane device) and PDMS (polydimethyl siloxan) passive samplers. The application of the PFM will enhance the accuracy of measurements made when calculating and reporting environmental pollutant concentrations using a passive sampling device.     

Optical and X-Ray Observations of the Symbiotic System Ag Draconis During Quiescence and Outburst

We review the main characteristics of the symbiotic system AG Draconis, with special emphasis on its optical and X-ray variations. We also discuss the X-ray to visual energy distribution during quiescence and outburst and describe our spectroscopic and X-ray observations during the 2003 outburst. Based on X-ray observations collected with the XMM–Newton Observatory, on INES data from the IUE satellite, and on optical spectra collected with the Asiago–Cima Ekar, Bologna–Loiano and La Palma–Galileo Italian telescopes.     

The new polymict eucrite Dar al Gani 983: Petrography,chemical composition,noble gas record,and evolution

Abstract— Mineralogical and chemical studies of Dar al Gani 983 show that this meteorite is a eucrite. Its texture is that of an impact breccia. It contains cumulate pyroxene and feldspar megacrysts, a variety of recrystallized melt clasts, clasts of subophitic basalt, and mesostasis. These components are embedded in a matrix of fragmental pyroxene and plagioclase. In addition, the entire rock is penetrated by glassy melt veins and patches, and displays features of strong shock. The mineralogical and chemical evidence obtained for DaG 983 indicates that this meteorite experienced a complex evolutionary history. The presence of cumulate silicate crystals implies substantial, large scale cratering events on the HED asteroid. As a result of these impacts, rocks from different intrusive bodies to extrusive surface layers were laterally and vertically transported to form a thoroughly mixed megaregolith. DaG 983 represents a sample of this megabreccia.     

Earthquakes in Switzerland and surrounding regions during 2006

This report of the Swiss Seismological Service summarizes the seismic activity in Switzerland and surrounding regions during 2006. During this period, 572 earthquakes and 91 quarry blasts were detected and located in the region under consideration. Of these earthquakes, two occurred in conjunction with the construction of the new Gotthard railway tunnel and 165 were induced artificially by the stimulation of a proposed geothermal reservoir beneath the city of Basel. With 20 events with M _L ≥ 2.5, five of which were artificially induced, the seismic activity in the year 2006 was far below the average over the previous 31 years. Nevertheless, six events were felt by the public, most prominently the strongest of the induced Basel events (M _L 3.4), which caused some non-structural building damage. Noteworthy are also the two earthquakes near Cortaillod (M _L 3.2), on the shore of Lake Neuchatel, and in Val Mora (M _L 3.5), between the Engadin and Val Müstair, as well as the 42 aftershocks of the M _L 4.9 Vallorcine earthquake, between Martigny and Chamonix, of September 2005. Editorial handling: Stefan Bucher     

Evaluation of Combined Direct-Push Methods Used for Aquifer Model Generation

Most established methods to characterize aquifer structure and hydraulic conductivities of hydrostratigraphical units are not capable of delivering sufficient information in the spatial resolution that is desired for sophisticated numerical contaminant transport modeling and adapted remediation design. With hydraulic investigation methods based on the direct-push (DP) technology such as DP slug tests, DP injection logging, and the hydraulic profiling tool, it is possible to rapidly delineate hydrogeological structures and estimate their hydraulic conductivity in shallow unconsolidated aquifers without the need for wells. A combined application of these tools was used for the investigation of a contaminated German refinery site and for the setup of hydraulic aquifer models. The quality of DP investigation and the models was evaluated by comparisons of tracer transport simulations using these models and measured breakthroughs of two natural gradient tracer tests. Model scenarios considering the information of all tools together showed good reproduction of the measured breakthroughs, indicating the suitability of the approach and a minor impact of potential technical limitations. Using the DP slug tests alone yielded significantly higher deviations for the determined hydraulic conductivities compared to considering two or three of the tools. Realistic aquifer models developed on basis of such combined DP investigation approaches can help optimize remediation concepts or identify flow regimes for aquifers with a complex structure.