Trace element distribution among rock-forming minerals from metamorphosed to partially molten basic igneous rocks in a contact aureole (Fuerteventura, Canaries)

Low pressure partial melting of basanitic and ankaramitic dykes gave rise to unusual, zebra-like migmatites, in the contact aureole of a layered pyroxenite–gabbro intrusion, in the root zone of an ocean island (Basal Complex, Fuerteventura, Canary Islands). These migmatites are characterised by a dense network of closely spaced, millimetre-wide leucocratic segregations. Their mineralogy consists of plagioclase (An_32–36), diopside, biotite, oxides (magnetite, ilmenite), +/− amphibole, dominated by plagioclase in the leucosome and diopside in the melanosome. The melanosome is almost completely recrystallised, with the preservation of large, relict igneous diopside phenocrysts in dyke centres. Comparison of whole-rock and mineral major- and trace-element data allowed us to assess the redistribution of elements between different mineral phases and generations during contact metamorphism and partial melting.

Dykes within and outside the thermal aureole behaved like closed chemical systems. Nevertheless, Zr, Hf, Y and REEs were internally redistributed, as deduced by comparing the trace element contents of the various diopside generations. Neocrystallised diopside – in the melanosome, leucosome and as epitaxial phenocryst rims – from the migmatite zone, are all enriched in Zr, Hf, Y and REEs compared to relict phenocrysts. This has been assigned to the liberation of trace elements on the breakdown of enriched primary minerals, kaersutite and sphene, on entering the thermal aureole. Major and trace element compositions of minerals in migmatite melanosomes and leucosomes are almost identical, pointing to a syn- or post-solidus reequilibration on the cooling of the migmatite terrain i.e. mineral–melt equilibria were reset to mineral–mineral equilibria.     

Low-pressure,water-assisted anatexis of basic dykes in a contact metamorphic aureole,Fuerteventura (Canary Islands): oxygen isotope evidence for a meteoric fluid origin

Migmatites produced by low-pressure anatexis of basic dykes are found in a contact metamorphic aureole around a pyroxenite–gabbro intrusion (PX2), on Fuerteventura. Dykes outside and inside the aureole record interaction with meteoric water, with low or negative δ¹⁸O whole-rock values (+0.2 to −3.4‰), decreasing towards the contact. Recrystallised plagioclase, diopside, biotite and oxides, from within the aureole, show a similar evolution with lowest δ¹⁸O values (−2.8, −4.2, −4.4 and −7.6‰, respectively) in the migmatite zone, close to the intrusion. Relict clinopyroxene phenocrysts preserved in all dykes, retain typically magmatic δ¹⁸O values up to the anatectic zone, where the values are lower and more heterogeneous. Low δ¹⁸O values, decreasing towards the intrusion, can be ascribed to the advection of meteoric water during magma emplacement, with increasing fluid/rock ratios (higher dyke intensities towards the intrusion acting as fluid-pathways) and higher temperatures promoting increasing exchange during recrystallisation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Second-order moment advection scheme applied to Arctic Ocean simulation

We apply the second-order moment (SOM) advection scheme of (Prather, M.J. 1986. Numerical advection by conservation of second-order moments. J. Geophys. Res. 91, 6671–6681.) to the simulation of the large-scale circulation of the Arctic Ocean with a coupled ocean–sea-ice model. Compared to three other advection schemes commonly employed in ocean simulations (centred differences, flux corrected transport, and multidimensional positive definite advection transport), the SOM method helps preserve the vertical structure of Arctic water masses. The depth, thickness and hydrographic properties of the Arctic Surface Water and the Arctic Atlantic Layer are better represented with SOM than with any of the other three advection algorithms. We also present a convenient method for calculating the implicit numerical diffusivity of upstream based schemes, such as the SOM method, and discuss three approaches for improving the monotonicity properties of the SOM algorithm.     

CO2 solubility and speciation in intermediate (andesitic) melts: the role of H2O and composition

We determined total CO₂ solubilities in andesite melts with a range of compositions. Melts were equilibrated with excess C-O(-H) fluid at 1 GPa and 1300°C then quenched to glasses. Samples were analyzed using an electron microprobe for major elements, ion microprobe for C-O-H volatiles, and Fourier transform infrared spectroscopy for molecular H₂O, OH⁻, molecular CO₂, and CO₃²⁻. CO₂ solubility was determined in hydrous andesite glasses and we found that H₂O content has a strong influence on C-O speciation and total CO₂ solubility. In anhydrous andesite melts with ∼60 wt.% SiO₂, total CO₂ solubility is ∼0.3 wt.% at 1300°C and 1 GPa and total CO₂ solubility increases by about 0.06 wt.% per wt.% of total H₂O. As total H₂O increases from ∼0 to ∼3.4 wt.%, molecular CO₂ decreases (from 0.07 ± 0.01 wt.% to ∼0.01 wt.%) and CO₃²⁻ increases (from 0.24 ± 0.04 wt.% to 0.57 ± 0.09 wt.%). Molecular CO₂ increases as the calculated mole fraction of CO₂ in the fluid increases, showing Henrian behavior. In contrast, CO₃²⁻ decreases as the calculated mole fraction of CO₂ in the fluid increases, indicating that CO₃²⁻ solubility is strongly dependent on the availability of reactive oxygens in the melt. These findings have implications for CO₂ degassing. If substantial H₂O is present, total CO₂ solubility is higher and CO₂ will degas at relatively shallow levels compared to a drier melt. Total CO₂ solubility was also examined in andesitic glasses with additional Ca, K, or Mg and low H₂O contents (<1 wt.%). We found that total CO₂ solubility is negatively correlated with (Si + Al) cation mole fraction and positively correlated with cations with large Gibbs free energy of decarbonation or high charge-to-radius ratios (e.g., Ca). Combining our andesite data with data from the literature, we find that molecular CO₂ is more abundant in highly polymerized melts with high ionic porosities (>∼48.3%), and low nonbridging oxygen/tetrahedral oxygen (<∼0.3). Carbonate dominates most silicate melts and is most abundant in depolymerized melts with low ionic porosities, high nonbridging oxygen/tetrahedral oxygen (>∼0.3), and abundant cations with large Gibbs free energy of decarbonation or high charge-to-radius ratio. In natural silicate melt, the oxygens in the carbonate are likely associated with tetrahedral and network-modifying cations (including Ca, H, or H-bonds) or a combinations of those cations.     

Virtual vegetables and adopted sheep: ethical relation, authenticity and Internet-mediated food production technologies

Associating ideas related to cultural geographies of 'quality' food production and consumption with recent discussion of Internet technologies, virtuality and simulation, this paper examines two newly constituted Internet enterprises offering customers 'virtual' experiences of food production, and 'quality' food products in which they have invested. The paper shows how these enterprises are associated with particular types of geographical and ethical relation, and a search for 'authentic', connected, relationships with food, farming, locality and 'nature'. These relationships are constituted in an assemblage of things held together by flows of food, products, money and electronic communication. The paper ends by suggesting a number of theoretical ideas that might usefully be explored in empirical research into Internet-mediated food production.     

Experimental determination of the fluid-absent melting relations in the pelitic system

In order to provide additional constraints on models for partial melting of common metasediments, we have studied experimentally the melting of a natural metapelite under fluid-absent conditions. The starting composition contains quartz, plagioclase, biotite, muscovite, garnet, staurolite, and kyanite. Experiments were done in a halfinch piston-cylinder apparatus at 7, 10, and 12 kbar and at temperatures ranging from 750° to 1250° C. The following reactions account for the mineralogical changes observed at 10 kbar between 750° and 1250° C: Bi+Als+Pl+Q=L+Gt+(Kf), Ky=Sill, Gt+Als=Sp+Q, Gt=L+Sp+Q, and Sp+Q=L+Als.The compositions of the phases (at T>875° C) were determined using an energy-dispersive system on a scanning electron microscope. The relative proportions of melt and crystals were calculated by mass balance and by processing images from the SEM. These constraints, together with other available experimental data, are used to propose a series of P-T, T-XH₂O, and liquidus diagrams which represent a model for the fluid-present and fluid-absent melting of metapelites in the range 2–20 kbar and 600°–1250° C.We demonstrate that, even under fluid-absent conditions, a large proportion (40%) of S-type granitic liquid is produced within a narrow temperature range (850°–875° C), as a result of the reaction Bi+Als+Pl+Q=L+Gt(+/-Kf). Such liquids, or at least some proportion of them, are likely to segregate from the source, leaving behind a residue composed of quartz, garnet, sillimanite, plagioclase, representing a characteristic assemblage of aluminous granulites.The production of a large amount of melt at around 850° C also has the important effect of buffering the temperature of metamorphism. In a restitic, recycled, lower crust undergoing further metamorphism, temperature may reach values close to 1000° C due to the absence of this buffering effect. Partial melting is the main process leading to intracontinental differentiation. We discuss the crustal cross-section exposed in the North Pyrenean Zone in the context of our experiments and modelling.     

The origin of the high-K latites from Camp Creek,Arizona: constraints from experiments with variable fO2 and a_{{\text{H}}_{\text{2}} {\text{O}}}

Near-liquidus melting experiments were performed on a high-K latite at fO₂'s ranging from iron-wustite-graphite (IWG) to nickel-nickel oxide (NNO) in the presence of a C-O-H fluid phase. Clinopyroxene is a liquidus phase under all conditions. At IWG , the liquidus at 10 kb is about 1,150° C but is depressed to 1,025° C at NNO and . Phlogopite and apatite are near-liquidus phases, with apatite crystallizing first at pressures below 10 kb. Phlogopite is a liquidus phase only at NNO and high . Under all conditions the high-K latites show a large crystallization interval with phlogopite becoming the dominant crystalline phase with decreasing temperature. Increasing fO₂ affects phlogopite crystallization but the liquidus temperature is essentially a function of . The chemical compositions of the near-liquidus phases support formation of the high-K latites under oxidizing conditions (NNO or higher) and high . It is concluded from the temperature of the H₂O-saturated liquidus at 10 kb, the groundmass: crystal ratio and presence of chilled latite margins around some xenoliths that the Camp Creek high-K latite magma passed thru the lower crust at temperatures of 1,000° C or more.     

On‐line Dangers?: Geographies of Parents’ Fears for Children's Safety in Cyberspace

Children are considered particularly important in debates about the possibilities and dangers of information and communication technologies (ICT). Discourses on ICT contain paradoxical representations of childhood. On the one hand, unlike most other understandings of child/adult relations, these discourses assume children to be equally, if not more, technologically competent than adults. On the other hand, children's very competence at using ICT is alleged to be putting them “at risk” of abuse or corruption. This paper addresses these moral panics about children and ICT by exploring to what extent and why parents are concerned about their children's safety in on‐line space. In doing so the paper reflects on the extent to which anxieties about children in cyberspace replicate concerns about public outdoor space and the way networked computers emerge as different tools in different households.     

The effect of oxygen fugacity on the solubility of carbon-oxygen fluids in basaltic melt

The solubility of CO₂CO fluids in a mid-ocean ridge basalt (morb) has been measured at 1200°C, 500–1500 bar, and oxygen fugacities between NNO and NNO-4. High oxygen fugacities, and thus CO₂-rich fluids, were produced by using a starting material equilibrated at NNO, and Ag₂C₂O₄ as the fluid source. Low oxygen fugacities were achieved by using graphite capsules, and MgCO₃ as the fluid source. These graphite-saturated fluids have the lowest possibleC/O₂CO ratio for a given pressure and temperature.

Experiments were run in a rapid-quench internally heated pressure vessel. Fluid compositions were measured using a simple vacuum technique and by Raman spectroscopy of fluid inclusions. The two techniques yielded comparable results. Fourier transform micro-infrared spectroscopy was used to identify and measure concentrations of dissolved volatiles in double-polished wafers of the quenched glasses. Carbonate was the only carbon-bearing species identified. Raman spectroscopic analysis of inclusion-free areas of glass confirmed the absence of dissolved molecular CO₂, CO and carbon. The measured concentrations of dissolved CO₂ in the glasses were proportional to the fugacity of CO₂ during the experiments, calculated from the measured fluid compositions. The data were fit to the equationX_CO2^melt(ppm)= 0.492 fCO₂ (bar).

The insolubility of CO, compared to CO₂, may be related to the fact that dissolution of CO requires reduction of another species in the melt, whereas dissolution of CO₂ does not. Due to the fact that CO will be an important component of natural CO fluids at low pressures and low oxygen fugacities, equilibrium dissolved CO₂ contents will be less than calculated assuming pure CO₂ fluids, but as theC/O₂CO ratio in a pure CO fluid at fixed pressure and temperature is a direct function of oxygen fugacity, measurement of the oxygen fugacity of quenched glasses or trapped fluids in natural samples should allow saturation concentrations to be calculated. Dissolved CO₂ contents of somemorb are less than expected if they were in equilibrium with pure CO₂. These samples must, therefore, have been more reduced than average if they were fluid-saturated. Together with results from other studies of CO₂ and H₂O solubilities in basalt, the results of this study provide a comprehensive framework for modelling CO₂ solution inmorb.