Understory and small trees contribute importantly to stemflow of a lower montane cloud forest

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.     

An interdisciplinary approach to depict landscape change drivers: A case study of the Ticuiz agrarian community in Michoacan, Mexico

Landscape changes are driven by a combination of physical, ecological and socio-cultural factors. Hence, a large amount of information is necessary to monitor these changes and to develop effective strategies for management and conservation. For this, novel strategies for combining social and environmental data need to be developed. The purpose of this study is to demonstrate the value of an innovative interdisciplinary approach to help in explaining landscape change. We integrated three main sources of information: biophysical landscape attributes, land-use/cover change analysis and social perceptions of land-use change, institutional and policy factors and environmental services. Multivariate statistical analysis was used to develop a weight for each variable described or quantified. Finally we identified proximate causes and underlying driving forces of land transformation in the study area. The study was undertaken in a typical community in Mexico.     

Analysis of anisotropy of magnetic susceptibility in iron-oolitic beds: a potential tool for paleocurrent identification

A combined sedimentological, shape-preferred orientation and anisotropy of magnetic susceptibility (AMS) analysis has been performed at the Arroyofrío Bed (Callovian–Oxfordian boundary level) in the locality of Moneva (Iberian Range, NE Spain). The Arroyofrío bed is a widespread iron-ooid limestone interval forming a condensed sequence. The present study has focused on the analysis of the potential presence of a preferred ooid orientation at the Arroyofrío bed. The obtained data show that ooids were originally ellipsoidal and had an imbricate disposition with respect to the bedding/lamination surface. The main ooid orientation within the bedding plane shows a NNE–SSW trend. Results of AMS analyses show a magnetic foliation parallel or slightly imbricated with respect to bedding and magnetic lineation parallel to the main ooid orientation. Magnetic mineralogy of studied samples shows that AMS is mainly controlled by magnetite with minor contributions of hematite and paramagnetic minerals (that can reach contributions of 35 %). The analyzed ooids show axial ratios between 1.4 and 2.8 (intrinsic anisotropy), while the anisotropy of their distribution shows lower anisotropies (e.g., Rs = 1.15) or very low values of the anisotropic magnetic parameters (e.g., P′ < 1.01). Sedimentary texture, matrix features, bioturbation and fossil content influenced both ooid main orientation and the magnetic fabric. Magnetic lineation and main orientation of long ooid axes are transverse to the inferred coastline in the studied area and parallel to the expected paleocurrent direction with respect to the Ejulve-Maestrazgo paleogeographic high. The direct correlation between AMS magnetic lineation and the ooid analysis permits to demonstrate that the paleocurrent imprint can be recorded by means of AMS despite the highly ferromagnetic context fabric and at coarse deposits. Obtained results support the interest and reliability of AMS to unravel paleocurrent imprints for paleogeographic reconstructions.     

Geochemical and isotope data from the Acatlán Volcanic Field, western Trans-Mexican Volcanic Belt: Origin and evolution

The Quaternary Acatlán Volcanic Field (AVF) is located at the western edge of the Trans-Mexican Volcanic Belt (TMVB). This region is related to the subduction of the Pacific Cocos and Rivera plates beneath the North American plate since the late Miocene. AVF rocks are products of Pleistocene volcanic activity and include lava flows, domes, erupted basaltic andesite, trachyandesite, trachydacite, and rhyolite of calc–alkaline affinity. Most rocks show depletion in high field-strength elements and enrichment in large ion lithophile elements and light rare earth elements as is typical for magmas in subduction-related volcanic arcs. ⁸⁷Sr/⁸⁶Sr values range from 0.70361 to 0.70412, while Nd values vary from +2.3 to +5.2. Sr–Nd isotopic data plot along the mantle array. On the other hand, lead isotope compositions (²⁰⁶Pb/²⁰⁴Pb=18.62–18.75, ²⁰⁷Pb/²⁰⁴Pb=15.57–15.64, and ²⁰⁸Pb/²⁰⁴Pb=38.37–38.67) give evidence for combined influences of the upper mantle, fluxes derived from subducted sediments, and the upper continental crust involved in magma genesis at AVF. Additionally δ¹⁸O whole rock analyses range from +6.35‰ in black pumice to +10.9‰ in white pumice of the Acatlán Ignimbrite. A fairly good correlation is displayed between Sr as well as O isotopes and SiO₂ emphasizing the effects of crustal contamination. Compositional and isotopic data suggest that the different AVF series derived from distinct parental magmas, which were generated by partial melting of a heterogeneous mantle source.     

The identification of distinct patterns in California temperature trends

Regional changes in California surface temperatures over the last 80 years are analyzed using station data from the US Historical Climate Network and the National Weather Service Cooperative Network. Statistical analyses using annual and seasonal temperature data over the last 80 years show distinctly different spatial and temporal patterns in trends of maximum temperature (Tmax) compared to trends of minimum temperature (Tmin). For trends computed between 1918 and 2006, the rate of warming in Tmin is greater than that of Tmax. Trends computed since 1970 show an amplified warming rate compared to trends computed from 1918, and the rate of warming is comparable between Tmin and Tmax. This is especially true in the southern deserts, where warming trends during spring (March?CMay) are exceptionally large. While observations show coherent statewide positive trends in Tmin, trends in Tmax vary on finer spatial and temporal scales. Accompanying the observed statewide warming from 1970 to 2006, regional cooling trends in Tmax are observed during winter and summer. These signatures of regional temperature change suggest that a collection of different forcing mechanisms or feedback processes must be present to produce these responses.     

Linking soil water balance with flood spatial arrangement in an extremely flat landscape

In areas with very mild relief, water drains in a disordered way due to the lack of a developed drainage network, as it occurs in extremely flat sedimentary regions like the Argentine Pampas. The study analysed the flood spatial arrangements in 2014 by calculating landscape metrics and relating them to soil water balance. The study area is located at Del Azul creek lower basin (Pampa Ecoregion, Argentina). Daily soil water balances were obtained, and seven landscape metrics were calculated in 15 windows in five LandSat images, all along 2014, to explore the relationship between hydrological scenarios and spatial pattern summarized with principal component analysis. Water excess concentrated in winter (June and August); deficits were in late spring and summer (January and November), whereas the beginning of autumn (March) was an intermediate situation. Principal component 1 (44.7%) reflected area and shape metrics and correlated positively with water table level; principal component 2 (32.3%) summarized aggregation ones and was negatively associated with accumulated water excesses or deficits in previous 30 days and useful reserve. Both exhibited possible threshold-driven behaviour. Internal heterogeneity between NW and SE zones within the study area coincided with the existence of ancient alluvial fans. The results highlight the peculiarities of the flood spatial patterns in regions with very mild relief, where landforms usually determine water flows.     

Intrinsic aquifer vulnerability assessment: validation by environmental tracers in San Miguel de Allende, Mexico

Vulnerability maps are important tools for water decision makers and land-use planners for protection of aquifers against contamination. The vulnerability map, according to the parametric method SINTACX for assessing intrinsic aquifer vulnerability, was validated in a case study with chlorofluorocarbon tracer technologies (CFC-11, CFC-12, and CFC-113) of groundwater. The tested area was the 1,295 km² volcano-sedimentary area of San Miguel de Allende (SMA), Mexico. From the results of this area, it appears that the vulnerability map is in parts inconsistent with the underlying groundwater flow system. Thus, the vulnerability map was corrected with tracer information. The validated vulnerability map indicates that the degree of vulnerability varies from low to moderate-high. Low vulnerability values are found in the graben extending from north to south along the SMA fault system and high values in recharge areas southeast and northwest of the study area. The investigation is a demonstration that the scientific reliability of results of the parametric method can be improved by validation with tracer techniques representing the groundwater dynamics. The flexible structure of SINTACX allows revising and adjusting scores and weights of the parameter maps to rebuild a new vulnerability map consistent with the hydrological system.     

Surface organic geochemical prospecting for hydrocarbons: multivariate analysis

A database of analyses of C₁ and C₇ hydrocarbons from an oil and gas producing region in Mexico has been assembled from gas samples collected at depths of 3, 15 and 30 meters from surficial holes drilled in traverses over producing and barren structures. The surface consisted of subtropical swamps; depth to structure was 3500 to 5800 meters.Hydrocarbon analysis from six structures (three producing and three barren) selected from the database were subjected to multiple discriminant function analysis to produce a retrospective statistical test of the ability of geochemical prospecting to distinguish producing from non-producing structures. The hydrocarbon spectra from 3 meters depth yielded ambiguous results; those from 30 meters produced clear distinction between barren and producing structures. Further, the discriminant functions established a base of geochemical characteristics, founded on known areas (retrospective), to which additional unknown areas (prospective) may be compared for classification. This suggests a bootstrapping approach to exploration in which an increasing number of “known” results can be used to continually update and refine the predictive power of the discriminant function.This indicates the practical ability of a combined geochemical-multivariate statistical prospecting approach as an exploration tool, particularly within a single geochemical/geological province. Geochemical prospecting, perhaps with relatively deep (30 m) penetration, combined with multivariate data analysis is a rapid, potent and relatively inexpensive additional tool for petroleum exploration.     

Wind and wave height climate from two decades of altimeter records on the Chilean Coast (15°–56.5° S)

Ocean Dynamics - In order to look for climatological changes on significant wave height and wind magnitude distributions, two decades of altimeter data were analyzed in a monthly 1° ×...