Application of environmental groundwater tracers at the Sulphur Bank Mercury Mine, California, USA

Boron, chloride, sulfate, δD, δ¹⁸O, and ³H concentrations in surface water and groundwater samples from the Sulphur Bank Mercury Mine (SBMM), California, USA were used to examine geochemical processes and provide constraints on evaporation and groundwater flow. SBMM is an abandoned sulfur and mercury mine with an underlying hydrothermal system, adjacent to Clear Lake, California. Results for non-³H tracers (i.e., boron, chloride, sulfate, δD, and δ¹⁸O) identify contributions from six water types at SBMM. Processes including evaporation, mixing, hydrothermal water input and possible isotopic exchange with hydrothermal gases are also discerned. Tritium data indicate that hydrothermal waters and other deep groundwaters are likely pre-bomb (before ~1952) in age while most other waters were recharged after ~1990. A boron-based steady-state reservoir model of the Herman Impoundment pit lake indicates that 71–79% of its input is from meteoric water with the remainder from hydrothermal contributions. Results for groundwater samples from six shallow wells over a 6–month period for δD and δ¹⁸O suggests that water from Herman Impoundment is diluted another 3% to more than 40% by infiltrating meteoric water, as it leaves the site. Results for this investigation show that environmental tracers are an effective tool to understand the SBMM hydrogeologic regime.

---

Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.

---

Résumé Les concentrations en bore, chlorure, sulfate, δD, δ¹⁸O, et ³H d’échantillons d’eaux de surface et souterraine prélevés dans le banc de soufre de la mine de mercure (SBMM en anglais) en Californie, USA, ont été utilisées pour étudier les processus géochimiques et pour fournir des contraintes à l’évaporation et à l’écoulement des eaux souterraines. La SBMM est une mine de soufre et de mercure abandonnée, adjacente au lac Clear en Californie et sous laquelle se trouve un système hydrothermal.Les résultats des traceurs autres que le tritium (bore, chlorure, sulfate, δD, et δ¹⁸O) ont permis d’identifier des contributions de six types d’eaux à SBMM. Des processus tels que l’évaporation, le mélange, l’entrée d’eau hydrothermale et de possibles échanges isotopiques avec des gaz hydrothermaux ont également été identifiés. Les données de tritium montrent que les eaux hydrothermales et d’autres eaux profondes sont probablement d’age antérieure à la bombe (avant ~1952), alors que la plupart des autres eaux sont issues de la recharge après ~1990. Un modèle de réservoir représentant le lac situé dans la partie Herman Impoundment de l’ancienne mine, en régime permanent et basé sur le bore, montre que 71–79% de l’eau provient des précipitations, le reste provenant de contributions hydrothermales. Les résultats de δD et δ¹⁸O pour des échantillons d’eau souterraine de six puits peu profonds sur une période de 6 mois suggèrent que l’eau de Hermann Impoundment est encore diluée entre 3% jusqu’à plus de 40% lorsqu’elle quitte le site du fait de l’infiltration d’eau météorique. Les résultats de cette étude montrent que les traceurs environnementaux constituent un outil efficace pour comprendre le régime hydrogéologique de la SBMM.

---

Resumen Se han utilizado datos de concentraciones de boro, cloruros, sulfatos, δD, δ¹⁸O, y ³H en muestras de aguas superficiales y subterráneas procedentes de la Mina de Mercurio Sulphur Bank (SBMM), California, USA, para estudiar los procesos geoquímicos y caracterizar la evaporación y el flujo del agua subterránea. SBMM es una mina abandonada de azufre y mercurio con un sistema hidrotermal subyacente, cercano al Lago Clear, California.Los resultados de los trazadores que no son ³H (por ejemplo, boro, cloruros, sulfatos δD, y δ¹⁸O) identifican las contribuciones de seis tipos de agua en la SBMM. Se han identificado diversos procesos, como evaporación, mezcla, entrada de agua hidrotermal y la posibilidad de intercambios isotópicos con gases hidrotermales. Los datos de tritio indican que las aguas hidrotermales y otras aguas subterráneas profundas son probablemente pre-bombas (previas a ~1952) en edad mientras que la mayoría de las otras aguas se han recargado después de ~1990. Un modelo estacionario basado en el boro de la fosa del lago Herman Impoundment indica que el 71–79% de su entrada procede de agua meteórica con restos de contribución hidrotermal. Los resultados para las muestras de aguas subterráneas procedentes de seis pozos superficiales en un periodo de 6 meses para δD y δ¹⁸O sugieren que el agua procedente de Herman Impoundment se diluye en otro 3% hasta más del 40% debido a la infiltración de agua meteórica., que sale del sitio. Los resultados de esta investigación muestran que los trazadores ambientales son una herramienta efectiva para entender el régimen hidrogeológico de la SBMM.

     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Structural and stratigraphic problems of the Argylla Formation near Mary Kathleen,Queensland

Rocks formerly mapped as Lower Proterozoic Argylla Formation near Mary Kathleen in northwest Queensland consist of parallel lenses of very deformed schist, quartzite and various types of metaporphyry. Completely intermingled with these are bands of amphibolite and lenses of the adjacent Wonga Granite. Finite ductile strains of 65–80% maximum shortening have been measured; these have produced transposition on both a mesoscopic and macroscopic scale. It is shown that the major stratigraphic boundaries are much shallower than the steeply dipping, constantly oriented unit boundaries. Intrusive relationships and structural criteria indicate that all the lithologies found within the mapped boundaries of the Argylla Formation are chronologically separate. This is confirmed by mapping in the much less deformed area near Winston Churchill Mine to the north. It is concluded that an original sedimentary pile was intruded first by dolerite dyke swarms and then by acid porphyry sills followed by granitic sill‐like instrusions of the Wonga Granite. Subsequent deformation and macroscopic transposition produced the present parallel‐layered structure.

These conclusions differ from currently accepted relationships of the Argylla Formation. Various possibilities are suggested; we favour the view that none of these rock types is equivalent to the defined Argylla Formation, and that the acid porphyries are younger than at Jeast some of the metasediments of the Mary Kathleen Group and may be a precursor of the Wonga Granite intrusion.     

The dependence of the climate sensitivity on convective parametrization: statistical evaluation

Two sensitivity experiments, in which CO₂ is instantaneously doubled, have been performed with a general circulation model to determine the influence of the convective parametrization on simulated climate change. We have examined the spatial structure of changes in the annual mean and annual cycle for surface temperature and precipitation for both experiments; similarly we have examined changes in the variance for these two fields. We have also computed a range of test statistics in order to obtain reliable measures of the signal-to-noise ratio in the climate change signal from each experiment. We have computed test statistics for the entire globe and for five different region and we contrast the global response with the response in the Australian region taken as a representative sample.We find that the highest signal-to-noise ratios in the change from 1 * CO₂ to 2 * CO₂ are for the change in surface temperature for both experiments with little difference in the global averages between the experiments. Globally averaged precipitation shows a greater noise level but perhaps the greatest contrast between experiments. There are generally significant increases in the temporal and spatial variability of precipitation in the change from the 1 * CO₂ to 2 * CO₂ and with some differences apparent between the two experiments. The temporal variability of surface temperature does not change significantly in any of the 2 * CO₂ cases, and there is little difference between the experiments. There is a significant decrease in the spatial variability of surface temperature in all 2 * CO₂ experiments in all cases and with significant differences in the seasonal variations between different experiments. The spatial variability of precipitation increases in all 2 * CO₂ cases and also with substantial differences in the seasonal variations between the experiments. There are accompanying significantly different spatial pattern correlations for both surface temperature and precipitation. In general we find that the global changes are fairly robust with the differences associated with convective parametrization schemes being very small. However, at the regional level, there are marked differences between experiments with changes both in the means and in the spatial and temporal variances but often with low levels of significance.     

Spatial and temporal distribution of heavy metal concentrations in mussels (Mytilus edulis) from the Baie des Chaleurs, New Brunswick, Canada

Previous studies on heavy metal contamination of the Baie des Chaleurs focus only on industrial centers and overlooked the ecosystem as a whole. To fill this gap, the objective of this study is to establish a baseline of the spatio-temporal distribution of heavy metals in mussels from the Baie des Chaleurs based on the ecosystem approach. Our results show, for the first time, a cadmium contamination in mussels across the south coast of the Baie des Chaleurs and not only in industrial centers. Our results also confirm previous studies showing heavy metal contamination of the Belledune area. This study demonstrates that the use of the ecosystemic approach is essential to obtain a comprehensive picture of environmental contamination in marine ecosystems.     

Background simulations for the Large Area Detector onboard LOFT

The Large Observatory For X-ray Timing (LOFT), currently in an assessment phase in the framework the ESA M3 Cosmic Vision programme, is an innovative medium-class mission specifically designed to answer fundamental questions about the behaviour of matter, in the very strong gravitational and magnetic fields around compact objects and in supranuclear density conditions. Having an effective area of ～10 m² at 8 keV, LOFT will be able to measure with high sensitivity very fast variability in the X-ray fluxes and spectra. A good knowledge of the in-orbit background environment is essential to assess the scientific performance of the mission and optimize the design of its main instrument, the Large Area Detector (LAD). In this paper the results of an extensive Geant-4 simulation of the instrumentwillbe discussed, showing the main contributions to the background and the design solutions for its reduction and control. Our results show that the current LOFT/LAD design is expected to meet its scientific requirement of a background rate equivalent to 10 mCrab in 2?30 keV, achieving about 5 mCrab in the most important 2–10 keV energy band. Moreover, simulations show an anticipated modulation of the background rate as small as 10 % over the orbital timescale. The intrinsic photonic origin of the largest background component also allows for an efficient modelling, supported by an in-flight active monitoring, allowing to predict systematic residuals significantly better than the requirement of 1 %, and actually meeting the 0.25 % science goal.     

The molecular universe

Helen J Fraser , Martin R S McCoustra and David A Williams present a simple guide to astrochemistry.
Molecules play a fundamental role in many regions of our universe. The science where chemistry and astronomy overlap is known as astrochemistry, a branch of astronomy that has risen in importance over recent years. In this article we review the significance of chemistry in several astronomical years. IN this article we review the significance of chemistry in several astronomical environments including the early universe, interstellar clouds, starforming regions and protoplanetary disks. We discuss theoretical models, laboratory experiments and observational data, and present several recent and exciting results that challenge our perception of the "molecular universe".     

Adsorption of As on hydroxy-Fe-montmorillonite complexes

DOI: 10.1360/03yd0553 Arsenic, a toxic element, is ubiquitous in the earth’s crust and may lead to health risks for humans. This may come about as a result of oxidative weathering and dissolution of As-containing minerals, use of ar-senical pesticides, excess use of some fertilizers and from mine drainage, smelter wastes and agricultural drainage water from certain arid regions. The dis-solved inorganic arsenic is transported in surface or2156 Science in China Ser. D Earth Sciences groun…     

Tropospheric methane in the mid-latitudes of the Southern Hemisphere

Results of more than 800 new measurements of methane (CH₄) concentrations in the Southern Hemisphere troposphere (34–41° S, 130–150° E) are reported. These were obtained between September 1980 and March 1983 from the surface at Cape Grim, Tasmania, through the middle (3.5–5.5 km) to the upper troposphere (7–10 km). The concentration of CH₄ increased throughout the entire troposphere over the measurement period, adding further support to the view that CH₄ concentrations are currently increasing on a global scale. For data averaged vertically through the troposphere the rate of increase found was 20 ppbv/yr or 1.3%/yr at December 1981. In the surface CH₄ data a seasonal cycle with a peak to peak amplitude of approximately 28 ppbv is seen, with the minimum concentration occurring in March and the maximum in September–October. A cycle with the same phase as that seen at the surface, but with a significantly decreased amplitude, is apparent in the mid troposphere but no cycle is detected in the upper tropospheric data. The phase and amplitude of the cycle are qualitatively in agreement with the concept that the major sink for methane is oxidation by hydroxyl radicals. Also presented is evidence of a positive vertical gradient in methane, with a suggestion that the magnitude of this gradient has changed over the period of measurements.