Biological and granulometric controls on sedimentary organic matter of an intertidal mudflat

A variety of measures of organic matter concentration and quality were made on samples collected from the top few mm of intertidal mudflat sediment over the course of a year, in order to assess the relative importance of biological and sedimentological influences on sedimentary organic matter. Winter and summer were times of relatively fine-grained sediment accumulation, caused by biological deposition or stabilization processes and resulting in higher organic matter concentrations. Stable carbon isotope and Br:C ratios indicated a planktonic source of bulk organic matter. Ratios of organic carbon to specific surface area of the sediments were consistent with an organic monolayer coverage of sediment grains. Correction for changing grain size during the year showed no change in the organic concentration per unit surface area, in spite of organic matter inputs by in situ primary production, buildup of heterotroph biomass and mucus coatings, and biodeposition of organic-rich seston. There were also no indications of changes in bulk organic quality, measured as hydrolyzable carbohydrates and amino acids, in response to these biological processes. It is concluded that biological processes on a seasonal time scale affect the bulk organic matter of these sediments via a modulation of grain size rather than creation or decay of organic matter.     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Redistribution of HFSE elements during rutile replacement by titanite

Titanite growth at the expense of rutile during retrograde hydration of eclogite into amphibolite is a common phenomenon. We investigated an amphibolite sample from the Tromsø eclogite facies terrain in Northern Norway to gain insight into the trace element distribution between rutile and titanite during incomplete resorption of the rutile by titanite. Patchy compositional zoning of Al, Ti, and F in titanite relates to the presence of a fluid with variable Ti/Al and/or F during its growth. Laser ablation ICP–MS and electron microprobe data for high field strength elements (HFSE: Nb, Zr, Ta, and Hf) of rutile resorbed by titanite indicate a pronounced enrichment of these elements in the rim of a large single rutile crystal (~8 mm) and a systematic decrease towards uniform HFSE contents in the large core. HFSE contents of smaller rutile grains (~0.5 mm) and rutile inclusions (<100 μm) in the titanite overgrowth are similar or higher than in the rims of large rutile crystals. Element profiles from the rim inward demonstrate that HFSE enrichment in rutile is controlled by diffusion. HFSE ratios in diffusion-altered rutile show systematic variations compared with the uniform core composition of the large rutile. Modelling of Zr and Nb diffusion in rutile indicates that diffusion coefficients in rutile in fluid-dominated natural systems must be considerably higher than those determined experimentally at 1 bar in dry systems. Variations of HFSE contents in the newly formed titanite show no systematic spatial distribution. HFSE ratios in titanite and the rims of rutile are different, indicating different solid/fluid distribution coefficients in these minerals. Element fractionation by diffusion into the relict rutile and during fluid-mediated growth of new titanite could substantially change the HFSE budget of these minerals and could affect their use for geochemical tracing and other applications, such as Zr-based geothermobarometry.     

Pre-Cenozoic intra-plate magmatism along the Central Andes (17–34°S): Composition of the mantle at an active margin

Sr–Nd–Pb isotope ratios of alkaline mafic intra-plate magmatism constrain the isotopic compositions of the lithospheric mantle along what is now the eastern foreland or back arc of the Cenozoic Central Andes (17–34°S). Most small-volume basanite volcanic rocks and alkaline intrusive rocks of Cretaceous (and rare Miocene) age were derived from a depleted lithospheric mantle source with rather uniform initial ¹⁴³Nd/¹⁴⁴Nd ( 0.5127–0.5128) and ⁸⁷Sr/⁸⁶Sr ( 0.7032–0.7040). The initial ²⁰⁶Pb/²⁰⁴Pb ratios are variable (18.5–19.7) at uniform ²⁰⁷Pb/²⁰⁴Pb ratios (15.60 ± 0.05). A variety of the Cretaceous depleted mantle source of the magmatic rocks shows elevated Sr isotope ratios up to 0.707 at constant high Nd isotope ratios. The variable Sr and Pb isotope ratios are probably due to radiogenic growth in a metasomatized lithospheric mantle, which represents the former sub-arc mantle beneath the early Palaeozoic active continental margin. Sr–Nd–Pb isotope signatures of a second mantle type reflected in the composition of Cretaceous (one late Palaeozoic age) intra-plate magmatic rocks (¹⁴³Nd/¹⁴⁴Nd  0.5123, ⁸⁷Sr/⁸⁶Sr  0.704, ²⁰⁶Pb/²⁰⁴Pb  17.5–18.5, and ²⁰⁷Pb/²⁰⁴Pb  15.45–15.50) are similar to the isotopic composition of old sub-continental lithospheric mantle of the Brazilian Shield.

Published Nd and Sr isotopic compositions of Mesozoic to Cenozoic arc-related magmatic rocks (18–40°S) represent the composition of the convective sub-arc mantle in the Central Andes and are similar to those of the Cretaceous (and rare Miocene) intra-plate magmatic rocks. The dominant convective and lithospheric mantle type beneath this old continental margin is depleted mantle, which is compositionally different from average MORB-type depleted mantle. The old sub-continental lithospheric mantle did not contribute to Mesozoic to Cenozoic arc magmatism.     

Weichselian interstadials at Riipiharju,northern Sweden – interpretation of vegetation and climate from fossil and modern pollen records

Hättestrand, M. & Robertsson, A.‐M. 2010: Weichselian interstadials at Riipiharju, northern Sweden – interpretation of vegetation and climate from fossil and modern pollen records. Boreas, 10.1111/j.1502‐3885.2009.00129.x. ISSN 0300‐9483. The most complete records of Weichselian ice‐free conditions in northern Sweden have been retrieved from kettleholes in the Riipiharju esker. In an earlier study, the Riipiharju I core was described as containing two Weichselian interstadials and Riipiharju was chosen as type site for the second Weichselian interstadial in northern Sweden. Here, we present a palynological investigation of two new sediment cores (Riipiharju II and III) retrieved from Riipiharju. Together, the new cores comprise a late cold part of the first Weichselian interstadial recorded in northeastern Sweden (Tärendö I, earlier correlated with Peräpohjola in Finland) as well as a long sequence of the second Weichselian interstadial (Tärendö II, earlier named Tärendö). The results indicate that the climate during deposition of the Tärendö II sequence was more variable than earlier suggested. According to the present interpretation it was relatively warm in the early part of Tärendö II; thereafter a long cold phase persisted, and finally the climate was warmer again in the late part of Tärendö II. The warm phases are characterized by Betula‐dominant pollen assemblages, while the cold phase is characterized by high percentages of Artemisia and Gramineae pollen. Since there is still no firm chronology established of the interstadials in northeastern Sweden, two possible correlations are discussed; either Tärendö I and II are correlated with Brörup (MIS 5c) and Odderade (MIS 5a), or, perhaps more likely, they are correlated with Odderade and early Middle Weichselian (MIS 3) time.     

Assessment of small-diameter shallow wells for managed aquifer recharge at a site in southern Styria,Austria

An approach to establish the recharge component of managed aquifer recharge (MAR) has recently been proposed that uses small-diameter shallow wells installed using relatively inexpensive drilling methods such as direct push. As part of further development of that approach, a generalized procedure is presented for a technical and economic assessment of the approach’s potential in comparison to other systems. Following this procedure, the use of small-diameter wells was evaluated both experimentally and numerically for a site located in southern Styria, Austria. MAR is currently done at the site using a horizontal pipe infiltration system, and system expansion has been proposed with a target rate of 12 l/s using small-diameter wells as one possible option. A short-duration single-well field recharge experiment (recharge rate 1.3–3.5 l/s) was performed (recharge by gravity only). Numerical modeling of the injection test was used to estimate hydraulic conductivity (K). Quasi-steady-state, single-well recharge simulations for different locations, as well as a long-term transient simulation, were performed using the K value calibrated from the field injection test. Results indicate that a recharge capacity of 4.1 l/s was achievable with a maximum head rise of 0.2 m at the injection well. Finally, simulations were performed for three different well fields (4, 6 and 8 wells, respectively) designed to infiltrate a target rate of 12 l/s. The experimental and numerical assessments, supported by a cost analysis of the small-diameter wells, indicate that the small-diameter wells are a viable, cost-effective recharge approach at this and other similar sites.     

Ex situ cultivation of Aplysinaaerophoba close to in situ conditions: ecological, biochemical and histological aspects

Sponges provide the largest number of biologically active natural products known from the marine environment and continue to be a very well studied phylum of marine fauna. The Mediterranean sponge Aplysina aerophoba accumulates brominated isoxazoline alkaloids such as Aplysinamisin-1, Aerophobin-2, Isofistularin-3 and the biotransformation product Aeroplysinin-1, which possesses, for example, antibiotic and cytotoxic properties. Until now, it is still being discussed which organisms – the sponge itself or associated microorganisms – are responsible for metabolite production. For cultivating Aplysina individuals under ex situ conditions, we surveyed relevant ecological factors in situ and controlled them in our aquarium system. We maintained A. aerophoba for more than 9 months and analysed changes of metabolite content and composition, microbial association as well as morphology in situ and ex situ under different light exposure. Although sponges showed slight reduction during maintenance, ex situ cultivation similar to in situ conditions provides a promising method to keep sponges and obtain their bioactive metabolites.     

Synthesis and thermal stability of 2 \frac{1}{2}-octahedral sodium mica,NaMg2.5 (OH)2∫i4O10]

A new 2 \(\frac{1}{2}\) -octahedral sheet silicate, NaMg_2.5 Si₄O₁₀ (OH)₂, has been synthesized from oxide mixtures in the temperature range 500–600°C at pressures between 1 and 5 kb. The lattice parameters are a ₀ = 5.298 Å, b ₀ = 9.047 Å, c ₀ = 9.479 Å and ß=99.55°. X-ray data are given in the text. At temperatures above 605° C/1 kb and 630° C/5 kb, it decomposes to magnesiorichterite plus quartz.