Heavy metal analyses in the marine environment - approaches to quality control

The validity of analyses of elements in the femto- and picomolar ranges in waters and sediments can be assessed on the basis of several criteria: an evaluation of the chemical technique; the use of primary standards and intercalibration exercises; and chemical and geochemical coherence of the results. Herein are reported analyses of ruthenium, platinum, palladium, rhenium, iridium and gold in oceanic samples. The gold concentrations in surface seawaters, at least 25 times less than those previously reported, are in accord with the concentrations of their periodic table neighbors as well as with crustal and sedimentary contents. The remarkable concentration of rhenium in seawater, in relation to its very low crustal abundance, can be explained by the inertness of the perrhenate ion.     

Variability in concentration of suspensates in an estuarine environment

Three data sets of suspensate concentrations, collected under different sampling plans, were analyzed to develop a minimal sampling period, consistent with a predetermined precision. Individual samples collected during any part of a given day were within ±50% of the daily average. In the main channel of the estuary, a monthly sampling scheme closely approximated a weekly pattern; however, seasonal sampling was unsatisfactory. Outside the main channel, weekly, monthly, and seasonal sampling patterns did not differ greatly. Variability in suspensate concentrations must be considered when calculating sediment flux in estuarine and coastal waters.     

Heave compensation and formation strength evaluation from downhole acceleration measurements while coring

In order to evaluate the efficiency of heave compensation in the Ocean Drilling Program, we developed a device measuring the acceleration of the core barrels. First results show that heave compensation limits bit motion to 10% of the surface heave. We also use the acceleration data to characterize the formation. On rotary corers, acceleration amplitudes decrease with increasing hardness of the formation. Comparison with geophysical logs shows that this relationship can resolve cm-scale features. On piston corers, the maximum acceleration is characteristic of the sediment shear strength. Easy and fast to deploy, this tool allows to characterize formations before any sample analysis.     

Io's sodium emission cloud and the voyager 1 encounter

Io's neutral sodium emission cloud was monitored during the period of Voyager 1 encounter from two independent ground-based sites. Observations from Table Mountain Observatory verified the continued existence of the “near-Io cloud” (d < 1.5 × 10⁵ km, for 4πI > 1 kR; R denotes Rayleigh) while those from Wise Observatory showed a deficiency in the weaker emission at greater distances from Io. The sodium cloud has been monitored from both observatories for several years. These and other observations demonstrate that the behavior of the cloud is complex since it undergoes a variety of changes, both systematic and secular, which can have both time and spatial dependencies. The cloud also displays some characteristics of stability. Table Mountain images and high-dispersion spectra (resolution $\text{～0.2}\text{A}\text{?}$) indicate that the basic shape and intensity of the “near cloud” have remained relatively constant at least since imaging observations began in 1976. Wise Observatory low-dispersion spectra (resolution $\text{～1}\text{A}\text{?}$) which have been obtained since 1974 demonstrate substantial variability of the size and intensity of the “far cloud” (d ? 1.5 × 10⁵ km) on a time scale of months or less. Corresponding changes in the state of the plasma associated with the Io torus are suggested, with the period of Voyager 1 encounter represented as a time of unusually high plasma temperature and/or density. Dynamic models of the sodium cloud employing Voyager 1 plasma data provide a reasonable fit to the Table Mountain encounter images. The modeling assumptions of anisotropic ejection of neutral sodium atoms from the leading, inner hemisphere of Io with a velocity distribution characteristic of sputtering adequately explain the overall intensity distribution of the “near cloud”. During the Voyager 1 encounter period there appeared a region of enhanced intensity projecting outward from Io's orbit and inclined to the orbital plane. This region is clearly distinguished from the sodium emission normally aligned with the plane of Io's orbit. The process responsible for this phenomenon is not yet understood. Similar but less pronounced features are also present in several Table Mountain images obtained over the past few years.     

Magma dynamics at the base of an evolving mafic magma chamber: Incompatible element evidence from the Partridge River intrusion, Duluth Complex, Minnesota, USA

A characteristic feature of the Partridge River intrusion of the Keweenawan Duluth Complex is the approximately fivefold to ninefold increase in the concentrations of incompatible elements in the lower zone compared with cumulates stratigraphically higher. The concentrations of incompatible elements decrease from the lower zone upward to steady state values, which is ascribed to variations in the proportions of trapped liquid rather than variable degrees of fractional crystallization of a single parental magma. The calculated average composition of trapped liquid using our algorithm is similar to typical Keweenawan low-alumina, high Ti---P basalts associated with the Duluth Complex but is different from the leading edge ferrodioritic liquid quenched in the chilled margin of the intrusion. This difference suggests that the chilled margin does not represent the original (parental) magma composition from which the whole intrusion solidified, and that the enrichment of incompatible elements may be related to the local flotation of magmatic suspensions. To test the latter hypothesis numerically, we have used heat-mass transfer models, assuming a sheet-like magma chamber, to calculate the parameters of the model that best reproduce the observed distribution of incompatible elements in a mush zone at the base of the Partridge River intrusion. The results indicate that a mush zone enriched in the incompatible elements is produced if the velocity of movement of the lower solidification front into the magma body was less than the floating velocity of the bulk crystal mush. The dynamic parameters that best reproduce the observed distribution of incompatible elements include a magma emplacement pressure of 2 kbar, critical crystallinities of 50–68% in the mush zone from which the liquid is being expelled, and an emplacement temperature of 1160°C for the initial magma.     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

Student Learning in an Introductory GIS Course: Using a Project‐Based Approach

Introductory courses in Geographic Information Science (GIS) expose students to the concepts and practices necessary for future academic and professional use of GIS tools. Traditional GIS courses balance lectures in the theories of GIS with pre‐built and pre‐packaged lab activities to learn the practices of GIS. This article presents a case study of an experimental introductory course in which students conducted novel, independent project‐based group research under the supervision of graduate or advanced undergraduate students enrolled in the course, culminating in a class presentation and publication quality paper. Surveys and interviews indicated that students reacted more positively to project‐based group research than to traditional activities. Students felt the projects better prepared them for ‘real world’ applications of GIS, and recommend project‐based group research in other GIS coursework. Additionally, our findings indicate that students appreciate interactions with peers of varying skill levels and experiences, as these broaden their capabilities to work with other GIS users.     

俄罗斯-蒙古地学断面地壳模型的地质-地球物理资料综合研究

地学断面是指地壳的垂直剖面,主要通过对地质和地球物理资料的综合分析来揭示构造带的性质及其空间关系。横断面的研究所采用的数据基本包括100 km宽区域地质图、上地壳的地质剖面图、重磁图(沿横断面的重磁剖面图)以及地壳的地震波速度、密度和其他地球物理属性的剖面图。这些数据被用于构建综合的数据剖面图(结果图),以展示各种地球动力学条件下(裂谷、海洋、碰撞带、造山盆地、大陆地台和岩浆弧,包括安第斯岛弧、活动大陆边缘、海沟、弧前和弧后盆地)的特定的岩石组构。本项目的研究目标是根据研究区现存的地质和地球物理数据的综合解释,统一图例,建立研究区深部剖面,以确定地体的空间关系及其在板块构造方面的地球动力学性质。 前人已分别对东西伯利亚南部和蒙古境内的多个地体进行了构造划分,并对它们的地球动力学性质和时空关系进行了分析。研究结果显示该系列地体为早古生代、中晚古生代和晚古生代—早中生代的岛弧和微大陆。此外,研究还识别出了中—晚古生代和晚古生代—早中生代安第斯型活动大陆边缘、晚古生代—早中生代被动大陆边缘和早白垩世裂谷。与岛弧和安第斯型活动大陆边缘相关的岩体被推覆至相邻大陆和微陆块上,部分推覆宽度可达150 km。目前已开展泥盆纪到晚侏罗世时期蒙古-鄂霍次克海地区的古地球动力学重建。 “非地槽”型花岗岩类岩浆作用在板块构造方面找到了直接且合理的解释,其中泥盆纪—石炭纪和二叠纪—三叠纪岩浆作用区域对应于安第斯型活动大陆边缘,中—晚侏罗世岩浆作用则与西伯利亚/蒙古-中国大陆板块碰撞有关。碰撞岩浆作用中亚碱性(地幔)元素的存在及其所在的构造区域在很大程度可以说明蒙古-鄂霍次克海闭合后,巨厚大陆岩石圈下曾经发生过持续的大洋裂谷活动(地幔热点)。在早白垩世时期,大陆裂谷活动影响到了同一时期正在发生的大陆汇聚作用。 西伯利亚南部边界大部分具有安第斯型活动大陆边缘性质,这也是蒙古—鄂霍次克缝合线沿线蛇绿岩数量较少的原因。因为当汇聚大陆一个具有安第斯类型的活动边缘,而另一个具有被动边缘时,前者的大陆地壳会最终逆冲到后者之上,并因此破坏掉先前出露的蛇绿杂岩体。部分被破坏的蛇绿岩块是俯冲带保留下来的海山残余,其可能成为增生-俯冲楔体的混沌复合体的一部分。然而,由于快速俯冲作用,这种楔形体在晚二叠世—早侏罗世的积累并不是西伯利亚活动边缘的典型特征。 沿地学断面综合的地质和地球物理资料分析表明,亚洲大陆是在显生宙时期由部分前寒武纪微陆块构造拼贴而成的。前寒武纪地块间存在不同宽度的已变形且剥蚀强烈的显生宙火山弧,它们也被归类为特定地体。     

A comparison of network model creation algorithms based on the quality of wayfinding results

Various network model creation algorithms have been introduced to demonstrate a better approximation of the actual walking pattern and to provide a better wayfinding guide. However, it is under‐investigated which algorithm creates the most appropriate indoor navigation network model in the context of wayfinding applications. Due to the lack of discussion, some studies unconsciously extended an algorithm designed for creating an outdoor navigation network model to indoor space applications. This is problematic because indoor space has different spatial contexts from outdoor space, such as non‐linear space and no‐designated walking space. Our solution is to select five well‐known algorithms that have been introduced, to reproduce the algorithm for the automated construction of the indoor navigation network model, and to evaluate the applicability of algorithms for indoor wayfinding applications. This article compares the quality of wayfinding results from the output of the indoor navigation network model against two criteria: route efficiency (i.e., length) and route simplicity (i.e., number of directions). Our statistical analysis illustrates that the visibility graph algorithm is the most appropriate for indoor wayfinding applications.