Properties of the clouds of Venus,as inferred from airborne observations of its near-infrared reflectivity spectrum

We have measured the shape and absolute value of Venus' reflectivity spectrum in the 1.2-to 4.0-μm spectral region with a circular variable filter wheel spectrometer having a spectral resolution of 1.5%. The instrument package was mounted on the 91-cm telescope of NASA Ames Kuiper Airborne Observatory, and the measurements were obtained at an altitude of about 41,000 feet, when Venus had a phase angle of 86°. Comparing these spectra with synthetic spectra generated with a multiple-scattering computer code, we infer a number of properties of the Venus clouds. We obtain strong confirmatory evidence that the clouds are made of a water solution of sulfuric acid in their top unit optical depth and find that the clouds are made of this material down to an optical depth of at least 25. In addition, we determine that the acid concentration is 84 ± 2% H_2SO4 by weight in the top unit optical depth, that the total optical depth of the clouds is 37.5 ± 12.5, and that the cross-sectional weighted mean particle radius lies between 0.5 and 1.4 μm in the top unit optical depth of the clouds. These results have been combined with a recent determination of the location of the clouds' bottom boundary [Marov et al., Cosmic Res.14, 637–642 (1976)] to infer additional properties about Venus' atmosphere. We find that the average volume mixing ratio of H₂SO₄ and H₂O contained in the cloud material both equal approximately 2× 10^?6. Employing vapor pressure arguments, we show that the acid concentration equals 84 ± 6% at the cloud bottom and that the water vapor mixing ratio beneath the clouds lies between 6 × 10^?4 and 10^?2.     

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.     

MIDAS-W: a workstation-based incoherent scatter radar data acquisition system

The Millstone Hill Incoherent Scatter Data Acquisition System (MIDAS) is based on an abstract model of an incoherent scatter radar. This model is implemented in a hierarchical software system, which serves to isolate hardware and low-level software implementation details from higher levels of the system. Inherent in this is the idea that implementation details can easily be changed in response to technological advances. MIDAS is an evolutionary system, and the MIDAS hardware has, in fact, evolved while the basic software model has remained unchanged. From the earliest days of MIDAS, it was realized that some functions implemented in specialized hardware might eventually be implemented by software in a general-purpose computer. MIDAS-W is the realization of this concept. The core component of MIDAS-W is a Sun Microsystems UltraSparc 10 workstation equipped with an Ultrarad 1280 PCI bus analog to digital (A/D) converter board. In the current implementation, a 2.25 MHz intermediate frequency (IF) is bandpass sampled at 1 s intervals and these samples are multicast over a high-speed Ethernet which serves as a raw data bus. A second workstation receives the samples, converts them to filtered, decimated, complex baseband samples and computes the lag-profile matrix of the decimated samples. Overall performance is approximately ten times better than the previous MIDAS system, which utilizes a custom digital filtering module and array processor based correlator. A major advantage of MIDAS-W is its flexibility. A portable, single-workstation data acquisition system can be implemented by moving the software receiver and correlator programs to the workstation with the A/D converter. When the data samples are multicast, additional data processing systems, for example for raw data recording, can be implemented simply by adding another workstation with suitable software to the high-speed network. Testing of new data processing software is also greatly simplified, because a workstation with the new software can be added to the network without impacting the production system. MIDAS-W has been operated in parallel with the existing MIDAS-1 system to verify that incoherent scatter measurements by the two systems agree. MIDAS-W has also been used in a high-bandwidth mode to collect data on the November, 1999, Leonid meteor shower.     

Observations of the quiet Sun at meter and decameter wavelengths

The new TeePee Tee array of the Clark Lake Radio Observatory has been used to observe the quiet Sun at 121.5, 73.8 and 26.3 MHz. The equatorial brightness distributions at all three frequencies, and the polar brightness distributions at the two higher ones have been measured. From the observed total fluxes and half-power diameters we have derived the peak brightness temperatures of the solar disk as well as of some sources of the slowly varying component.On leave of absence from Instituto Argentino de Radioastronomía, Argentina.     

Positions and motions of solar bursts at decameter wavelengths

The positions and motions of solar bursts in the range 20 to 60 MHz have been measured by the means of a sweep-frequency grating interferometer with angular resolution of 5 arc at 60 MHz decreasing to 15 arc at 20 MHz. The positional characteristics of the decameter wavelength bursts are discussed in terms of the commonly accepted theories of the origin of radio bursts from plasma and synchrotron radiations.     

Would constraining US fossil fuel production affect global CO<Subscript>2</Subscript> emissions? A case study of US leasing policy

Avoiding dangerous climate change will require a rapid transition away from fossil fuels. By some estimates, global consumption and production of fossil fuels—particularly coal and oil—will need to end almost entirely within 50 years. Given the scale of such a transition, nations may need to consider policies that constrain growth in fossil fuel supplies in addition to those that reduce demand. Here, we examine the emissions implications of a supply-constraining measure that was rapidly gaining momentum in the United States (US) under the Obama administration: ceasing the issuance of new leases for fossil fuel extraction on federal lands and waters. Such a measure could reduce global carbon dioxide emissions by an estimated 280 million tons annually by 2030, comparable to that of other major climate policies adopted or considered by the Obama administration. Our findings suggest that measures to constrain fossil fuel supply—though not currently viable in a US Trump administration—deserve further consideration at subnational levels in the US or by other countries now, and by future US administrations.     

Swimming upstream: addressing fossil fuel supply under the UNFCCC

Reducing fossil fuel supply is necessary to meet the Paris Agreement goal to keep warming ‘well below 2°C’, yet the Agreement is silent on the topic of fossil fuels. This article outlines reasons why it is important that Parties to the Agreement find ways to more explicitly address the phasing out of fossil fuel production under the UNFCCC. It describes how countries aiming to keep fossil fuel supply in line with Paris goals could articulate and report their actions within the current architecture of the Agreement. It also outlines specific mechanisms of the Paris Agreement through which issues related to the curtailment of fossil fuel supply can be addressed. Mapping out a transition away from fossil fuels – and facilitating this transition under the auspices of the UNFCCC process – can enhance the ambition and effectiveness of national and international climate mitigation efforts.

Key policy insights

• The international commitment to limit global average temperature increases to ‘well below 2°C’ provides a strong rationale for Parties to the Paris Agreement and the UNFCCC to pursue a phase-down in fossil fuel production, not just consumption.

• Several countries have already made commitments to address fossil fuel supply, by agreeing to phase down coal or oil exploration and production.

• Integrating these commitments into the UNFCCC process would link them to global climate goals, and ensure they form part of a broader global effort to transition away from fossil fuels.

• The Paris Agreement provides a number of new opportunities for Parties to address fossil fuel production.

     

High-resolution climate simulation of the last glacial maximum

The climate of the last glacial maximum (LGM) is simulated with a high-resolution atmospheric general circulation model, the NCAR CCM3 at spectral truncation of T170, corresponding to a grid cell size of roughly 75 km. The purpose of the study is to assess whether there are significant benefits from the higher resolution simulation compared to the lower resolution simulation associated with the role of topography. The LGM simulations were forced with modified CLIMAP sea ice distribution and sea surface temperatures (SST) reduced by 1°C, ice sheet topography, reduced CO₂, and 21,000 BP orbital parameters. The high-resolution model captures modern climate reasonably well, in particular the distribution of heavy precipitation in the tropical Pacific. For the ice age case, surface temperature simulated by the high-resolution model agrees better with those of proxy estimates than does the low-resolution model. Despite the fact that tropical SSTs were only 2.1°C less than the control run, there are many lowland tropical land areas 4–6°C colder than present. Comparison of T170 model results with the best constrained proxy temperature estimates (noble gas concentrations in groundwater) now yield no significant differences between model and observations. There are also significant upland temperature changes in the best resolved tropical mountain belt (the Andes). We provisionally attribute this result in part as resulting from decreased lateral mixing between ocean and land in a model with more model grid cells. A longstanding model-data discrepancy therefore appears to be resolved without invoking any unusual model physics. The response of the Asian summer monsoon can also be more clearly linked to local geography in the high-resolution model than in the low-resolution model; this distinction should enable more confident validation of climate proxy data with the high-resolution model. Elsewhere, an inferred salinity increase in the subtropical North Atlantic may have significant implications for ocean circulation changes during the LGM. A large part of the Amazon and Congo Basins are simulated to be substantially drier in the ice age—consistent with many (but not all) paleo data. These results suggest that there are considerable benefits derived from high-resolution model regarding regional climate responses, and that observationalists can now compare their results with models that resolve geography at a resolution comparable to that which the proxy data represent.