Photometric observations of the short-period (RS CVn-type) eclipsing binary system CG Cyg have been presented. Two sets of results, obtained from an analysis of theB, V andR light curves, represent ‘occultation’ and ‘transit’ solutions. The occultation solution is preferred as it gives a better fit to the colour curve. This hypothesis may also offer a more promising explanation of the observed peculiarities such as period changes and the light variation outside eclipses. 相似文献
The compression index (Cc), which is used to calculate the consolidation settlement of fine-grained soils, can be determined through consolidation testing. Given that exploring the soil in a local region is highly important to determine the correlation between the Cc and other soil indices, the present study investigated these correlations in undisturbed and disturbed samples through 130 consolidation tests and determining the Cc of Tehran clay. The results are suggestive of the validity of the linear correlation between the Cc and the unit weight and initial void ratio of the soil, with several relations presented to estimate the Cc of Tehran clay soil. In contrast, the initial water content, liquid limit and the plasticity index do not produce reliable correlations with the Cc of the local clay soil, and a relation based on these index parameters cannot be recommended in this area. Further, the presented empirical correlations were compared with the existing ones. More over time-displacement and e-log σ’ graphs for undisturbed and disturbed samples are compared and stress history of the site are presented. The results are significant in terms of engineering applications, saving time and money and provides an initial estimation of compression index.
Increasing population in urban areas and limitations of suitable lands for developing houses and urban infrastructure have led to the vertical development in cities. However, these developments are managed by a cadastral system which is mainly two-dimensional and cannot efficiently represent Rights, Restrictions, and Responsibilities (RRRs) in complex scenarios. In fact, a three-dimensional cadastre is required for efficiently registering and representing RRRs. In this paper, a 3D proximity analysis was proposed and implemented to determine RRRs and associated easement rights in non-topology-based data structures. This method can be used to investigate the surrounding spaces of a subject apartment unit or storage in a high-rise. The performance of the developed method was evaluated in a large complex high-rise in Tehran, Iran. The results confirmed that the proposed method can correctly identify the neighbor spaces in complex scenarios. 相似文献
Manual extraction of road network by human operator is an expensive and time-consuming procedure. Alternatively, automation
of the extraction process would be a great advancement. For this purpose, an automatic method is proposed to extract roads
from high resolution satellite images. In this study, using few samples from road surface, a particle swarm optimization is
applied to a fuzzy-based mean calculation system to obtain road mean values in each band of high resolution satellite colour
images. Then, the images are segmented using the calculated mean values from the fuzzy system. Optimizing the fuzzy cost function
by particle swarm optimization enables the fuzzy approach to be the best mean value of road with sub-grey level precision.
Initially, this method was applied to simulated images where the calculated mean values are consistent with the hypothetic
mean values. Application of the method to IKONOS satellite images has shown a prospective outcome for automatic road extraction.
Mathematical morphology is subsequently used to extract an initial main road centreline from the segmented image. Then, small
redundant segments are automatically removed. The quality of the extracted road centreline indicates the effectiveness of
the proposed approach. 相似文献
Interest in rock slope stability in mountainous regions has increased greatly in recent years.This issue has become a topic of major interest for geoscientists and engineering professionals,as well as for private citizens and local administrators,in many parts of the world.This paper evaluates the stability of seven rock slopes along the KamyaranMarivan tourist road,Kurdistan province,Iran,using various methods.The two main reasons for performing this research were to determine whether different methods of stability analysis provide the same results,and to determine how different factors such as the presence of water,tension cracks,and seismic forces affect the stability of these rock slopes.Firstly,field investigations were performed to obtain the engineering characteristics of the rock masses,discontinuities,and intact rocks of the slopes.Secondly,laboratory tests were carried out on rock samples obtained from the slopes,to determine the engineering properties of the intact rocks.Then for each rock slope,the contour diagram of discontinuities and slope face was drawn in the Dips v.5.1 software environment,and the failure mechanism was determined based on the kinematic or stereographic method.Next,the factors of safety of the rock slopes were calculated using the limit equilibrium method,based on the failure mechanisms resulting from the kinematic method.The accuracy of the results obtained by these two methods was investigated using SWedge v.4.0 software.The results indicated that four rock slopes have a potential for plane,wedge,and toppling failure,and three others are stable.Also,it was found that the stability of the studied rock slopes decreases greatly in the presence of water,tension cracks,and seismic forces. 相似文献
New UBV photometry of Algol-Type eclipsing binary star AI Dra andthe absolute physical parameters of this system have been presented.The light curve analysis carried out by the method of differentialcorrections indicates that both components are inside their Roche-Lobes.From combining the photometric solution with spectroscopic data obtainedfrom velocity curve analysis, it has been found that the system consistof a main sequence primary and an evolved (subgiant) secondary. 相似文献
This paper describes how a new photometric V light curve solution of Algol type binary U Sge was obtained using Wilson–Devinney
code. I also discuss how the physical and orbital parameters, along with absolute dimensions of the system, were determined.
The Roche lobe configurations of the system indicate that the secondary component has filled its Roche lobe and therefore
is losing mass at the rate of 6.15×10−7Msun yr−1. The conservative mass flow is the most likely process in this system. 相似文献
The Tafresh granitoids are located at the central part of the Urumieh-Dokhtar Magmatic Arc(UDMA) in Iran. These rocks, mainly consisting of diorite and granodiorite, were emplaced during the Early Miocene. They are composed of varying proportions of plagioclase + K-feldspar + hornblende ± quartz ± biotite. Discrimination diagrams and chemical indices of amphibole phases reveal a calc-alkaline affinity and fall clearly in the crust-mantle mixed source field. The estimated pressure, derived from Al in amphibole barometry, is approximately 3 Kb. The granitoids are I-type, metaluminous and belong to the calc-alkaline series. They are all enriched in light rare earth elements and large ion lithophile elements, depleted in high field strength elements and display geochemical features typical of subduction-related calc-alkaline arc magmas. Most crystal size distribution(CSD) line patterns from the granitoids show a non-straight trend which points to the effect of physical processes during petrogenesis.The presence of numerous mafic enclaves, sieve texture and oscillatory zoning along with the CSD results show that magma mixing in the magma chamber had an important role in the petrogenesis of Tafresh granitoids. Moreover, the CSD analysis suggests that the plagioclase crystals were crystallized in a time span of less than 1000 years, which is indicative of shallow depth magma crystallization. 相似文献
The fresh groundwater lenses (FGLs) of small islands can be highly vulnerable to climate change impacts, including sea‐level rise (SLR). Many real cases of atoll or sandy islands involve two‐layer hydrogeological conceptualizations. In this paper, the influential factors that affect FGLs in two‐layer small islands subject to SLR are investigated. An analytical solution describing FGLs in circular islands, composed of two geological layers, is developed for the simplified case of steady‐state and sharp‐interface conditions. An application of the developed model is demonstrated to estimate the FGL thickness of some real‐world islands by comparison with existing FGL thickness data. Furthermore, numerical modelling is applied to extend the analysis to consider dispersion effects and to confirm comparable results for both cases. Sensitivity analyses are used to assess the importance of land‐surface inundation caused by SLR, relative to other parameters (i.e. thickness of aquifer layers, hydraulic conductivity, recharge rate and land‐surface slope) that influence the FGL. Dimensionless parameters are used to generalize the findings. The results demonstrate that land‐surface inundation has a considerable impact on a FGL influenced by SLR, as expected, although the FGL volume is more sensitive to recharge, aquifer thickness and hydraulic conductivity than SLR impacts, considering typical parameter ranges. The methodology presented in this study provides water resource managers with a rapid‐assessment tool for evaluating the likely impacts of SLR and accompanying LSI on FGLs. 相似文献
To present a new method for building boundary detection and extraction based on the active contour model, is the main objective of this research. Classical models of this type are associated with several shortcomings; they require extensive initialization, they are sensitive to noise, and adjustment issues often become problematic with complex images. In this research a new model of active contours has been proposed that is optimized for the automatic building extraction. This new active contour model, in comparison to the classical ones, can detect and extract the building boundaries more accurately, and is capable of avoiding detection of the boundaries of features in the neighborhood of buildings such as streets and trees. Finally, the detected building boundaries are generalized to obtain a regular shape for building boundaries. Tests with our proposed model demonstrate excellent accuracy in terms of building boundary extraction. However, due to the radiometric similarity between building roofs and the image background, our system fails to recognize a few buildings. 相似文献