Beaver dam analogues drive heterogeneous groundwater–surface water interactions

Beaver dam analogues (BDAs) are a cost-effective stream restoration approach that leverages the recognized environmental benefits of natural beaver dams on channel stability and local hydrology. Although natural beaver dams are known to exert considerable influence on the hydrologic conditions of a stream system by mediating geomorphic processes, nutrient cycling, and groundwater–surface water interactions, the impacts of beaver-derived restoration methods on groundwater–surface water exchange are poorly characterized. To address this deficit, we monitored hyporheic exchange fluxes and streambed porewater biogeochemistry across a sequence of BDAs installed along a central Wyoming stream during the summer of 2019. Streambed fluxes were quantified by heat tracing methods and vertical hydraulic gradients. Biogeochemical activity was evaluated using major ion porewater chemistry and principal component analysis. Vertical fluxes of approximately 1.0 m/day were observed around the BDAs, as was the development of spatially heterogeneous zones of nitrate production, groundwater upwelling, and anaerobic reduction. Strong contrasts in hyporheic zone processes were observed across BDAs of differing sizes. This suggests that structures may function with size-dependent behaviour, only altering groundwater–surface water interactions after a threshold hydraulic step height is exceeded. Patterns of hyporheic exchange and biogeochemical cycling around the studied BDAs resemble those around natural beaver dams, suggesting that BDAs may provide comparable benefits to channel complexity and near-stream function over a 1-year period.     

Spectral variations of DY Cen

Two high resolution spectra of the hot RCrB star DY Cen in the red region are compared. The photospheric absorption lines show a radial velocity variation of 12 kms-1 between 1989 July and 1992 May. Emission components to some CII lines present in 1989 are almost entirely absent in 1992. Nebular forbidden lines of [OI], [NII] and [SII] appear unchanged from 1989 to 1992     

Mapping sediment acoustic impedance using remote sensing acoustic techniques in a shallow-water carbonate environment

 Real-time trackline plots of surficial sediment acoustic impedance delineate several sedimentary facies off Garden Key in the Dry Tortugas. The sea floor within a 6×6 km surveyed area consists of carbonate muds (silts), sands and shell, rock, and live corals. The 4-kHz acoustic data supports this finding by providing a pictographic representation of the distribution and structure of several sediment facies types. Plotting the gridded acoustic data with commercial mapping software (Surfer) provides a three-dimensional (3D) perspective of the bottom topography with a color contour map of surficial sediment impedance (upper 0.4 m) draped over the 3D surface.     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

Current-influenced depositional provinces, continental margin off Cape Hatteras, identified by petrologic method

Analyses of DSRV “Alvin” core samples on the Cape Hatteras margin indicate major textural and compositional changes at depths of about 1000 and well below 2500 m. The distribution patterns of petrologic parameters correlate well with water mass flow and suspended-sediment plumes measured on this margin by other workers. Our study also shows: (a) vigorous erosion and sediment transport at depths of less than 400 m resulting from the NE-trending Gulf Stream flow; (b) deposition, largely planktonic-rich sediment released from the Gulf Stream, on the upper- to mid-slope, to depths of about 800–1200 m; (c) winnowing, resuspension and deposition induced by periodically intensified slope currents on the mid-slope to uppermost rise, between about 1000 and 2500 m; and (d) prevailing deposition on the upper rise proper (below 2500 m), from transport by the SW-trending Western Boundary Undercurrent. Sediments moved by bottom currents have altered the composition and distribution patterns of material transported downslope by offshelf spillover; this mixing of gravity-emplaced and bottom-current-transported sediment obscures depositional boundaries. Moreover, reworking of the seafloor by benthic organisms alters physical properties and changes erodability of surficial sediments by bottom currents. Measurement of current flow above the seafloor and direct observation of the bottom are insufficient to delineate surficial sediment boundaries. Detailed petrologic analyses are needed to recognize the long-term signature of processes and define depositional provinces.     

Dynamics and control of a towed underwater vehicle system, part I: model development

Autonomous vehicles are being developed to replace the conventional, manned surface vehicles that tow mine hunting towed platforms. While a wide body of work exists that describes numerical models of towed systems, they usually include relatively simple models of the towed bodies and neglect the dynamics of the towing vehicle. For systems in which the mass of the towing vehicle is comparable to that of the towed vehicle, it becomes important to consider the dynamics of both vehicles. In this work, we describe the development of a numerical model that accurately captures the dynamics of these new mine hunting systems. We use a lumped mass approximation for the towcable and couple this model to non-linear numerical models of an autonomous surface vehicle and an actively controlled towfish. Within the dynamics models of the two vehicles, we include non-linear controllers to allow accurate maneuvering of the towed system.     

Phytoplankton and iron: validation of a global three-dimensional ocean biogeochemical model

The JGOFS program and NASA ocean-color satellites have provided a wealth of data that can be used to test and validate models of ocean biogeochemistry. A coupled three-dimensional general circulation, biogeochemical, and radiative model of the global oceans was validated using these in situ data sources and satellite data sets. Biogeochemical processes in the model were determined from the influences of circulation and turbulence dynamics, irradiance availability, and the interactions among four phytoplankton functional groups (diatoms, chlorophytes, cyanobacteria, and coccolithophores) and four nutrients (nitrate, ammonium, silica, and dissolved iron).Annual mean log-transformed dissolved iron concentrations in the model were statistically positively correlated on basin scale with observations (P<0.05) over the eight (out of 12) major oceanographic basins where data were available. The model tended to overestimate in situ observations, except in the Antarctic where a large underestimate occurred. Inadequate scavenging and excessive remineralization and/or regeneration were possible reasons for the overestimation.Basin scale model chlorophyll seasonal distributions were positively correlated with SeaWiFS chlorophyll in each of the 12 oceanographic basins (P<0.05). The global mean difference was 3.9% (model higher than SeaWiFS).The four phytoplankton groups were initialized as homogeneous and equal distributions throughout the model domain. After 26 years of simulation, they arrived at reasonable distributions throughout the global oceans: diatoms predominated high latitudes, coastal, and equatorial upwelling areas, cyanobacteria predominated the mid-ocean gyres, and chlorophytes and coccolithophores represented transitional assemblages. Seasonal patterns exhibited a range of relative responses: from a seasonal succession in the North Atlantic with coccolithophores replacing diatoms as the dominant group in mid-summer, to successional patterns with cyanobacteria replacing diatoms in mid-summer in the central North Pacific. Diatoms were associated with regions where nutrient availability was high. Cyanobacteria predominated in quiescent regions with low nutrients.While the overall patterns of phytoplankton functional group distributions exhibited broad qualitative agreement with in situ data, quantitative comparisons were mixed. Three of the four phytoplankton groups exhibited statistically significant correspondence across basins. Diatoms did not. Some basins exhibited excellent correspondence, while most showed moderate agreement, with two functional groups in agreement with data and the other two in disagreement. The results are encouraging for a first attempt at simulating functional groups in a global coupled three-dimensional model but many issues remain.     

Increased Terrestrial to Ocean Sediment and Carbon Fluxes in the Northern Chesapeake Bay Associated With Twentieth Century Land Alteration

We calculated Chesapeake Bay (CB) sediment and carbon fluxes before and after major anthropogenic land clearance using robust monitoring, modeling and sedimentary data. Four distinct fluxes in the estuarine system were considered including (1) the flux of eroded material from the watershed to streams, (2) the flux of suspended sediment at river fall lines, (3) the burial flux in tributary sediments, and (4) the burial flux in main CB sediments. The sedimentary maximum in Ambrosia (ragweed) pollen marked peak land clearance (~1900 a.d.). Rivers feeding CB had a total organic carbon (TOC)/total suspended solids of 0.24?±?0.12, and we used this observation to calculate TOC fluxes from sediment fluxes. Sediment and carbon fluxes increased by 138–269% across all four regions after land clearance. Our results demonstrate that sediment delivery to CB is subject to significant lags and that excess post-land clearance sediment loads have not reached the ocean. Post-land clearance increases in erosional flux from watersheds, and burial in estuaries are important processes that must be considered to calculate accurate global sediment and carbon budgets.     

Brønsted reactions on oxide mineral surfaces and the temperature-dependence of their dissolution rates

The pH-dependence of oxide dissolution rates is controlled by Brønsted acid-base reactions at the mineral surface. These reactions are rapid but depend explicitly on temperature, as do the subsequent slow rates of bond hydrolysis. The net result is that dissolution rates vary in a complicated fashion with temperature and solution pH. The enthalpy changes of acid-base reactions on oxide materials are sufficiently similar, however, that general statements can be made about their contribution. The enthalpy changes from proton adsorption to a hydroxyl functional group (SOH), or to a deprotonated functional group (SO ^–), are generally exothermic. The enthalpy changes become increasingly endothermic, however, as charge accumulates on the mineral surface and the charged species interact electrostatically. The result is that mineral dissolution rates are least sensitive to temperature, as measured with an Arrhenius-like rate law, at pH conditions near the Point of Zero Net Proton Charge.