The decay products of 222rn in etched track radon detection

Precipitation of decay products of atmospheric ²²²Rn in small containers and the effects of their precipitation on alpha-particle-track-measurements of radon activities were studied. From decay curves of decay product activities on surfaces exposed to radon-containing air the ratios ²¹⁴Pb/²¹⁸Po (=r) in the precipitates were determined. From r average ages of precipitating decay products were calculated. Average ages and r were low, indicating rapid precipitation of decay products, and decreased with container size. Activities on exposed surfaces were approximately those expected if decay products precipitate completely and uniformly on the internal surfaces of containers.Decay products precipitated on foils of correct thickness covering cellulose nitrate (CN) track detectors produce tracks. Therefore track densities produced by given radon activities are increased by such covers to extents predictable from the decay product activities on the overlays. Tracks formed under overlays may etch to larger, more vertical-sided, more easily counted forms. When suspended, uncovered, in air at distances from surfaces greater than the ranges of the alpha particles, three types of CN recorded tracks at the rate (ρ′) of 0.12 tracks cm^?2 (pCi Rn)^?1 1^?1 hr^?1 as predicted by a theoretical expression. In small containers (ρ′) varied with position and container size.     

Dynamics of polar plumes observed at the 1998 February 26 eclipse

Solar Physics - This paper presents first observations of dynamics of the white-light solar corona detected during the few minutes of totality of a solar eclipse. Perturbations of a polar plume...     

The Hinode Spectro-Polarimeter

The joint Japan/US/UK Hinode mission includes the first large-aperture visible-light solar telescope flown in space. One component of the Focal Plane Package of that telescope is a precision spectro-polarimeter designed to measure full Stokes spectra with the intent of using those spectra to infer the magnetic-field vector at high precision in the solar photosphere. This article describes the characteristics of the flight hardware of the Hinode Spectro-Polarimeter, and summarizes its in-flight performance.     

The relationship between carbonate facies, volcanic rocks and plant remains in a late Palaeozoic lacustrine system (San Ignacio Fm, Frontal Cordillera, San Juan province, Argentina)

The San Ignacio Fm, a late Palaeozoic foreland basin succession that crops out in the Frontal Cordillera (Argentinean Andes), contains lacustrine microbial carbonates and volcanic rocks. Modification by extensive pedogenic processes contributed to the massive aspect of the calcareous beds. Most of the volcanic deposits in the San Ignacio Fm consist of pyroclastic rocks and resedimented volcaniclastic deposits. Less frequent lava flows produced during effusive eruptions led to the generation of tabular layers of fine-grained, greenish or grey andesites, trachytes and dacites. Pyroclastic flow deposits correspond mainly to welded ignimbrites made up of former glassy pyroclasts devitrified to microcrystalline groundmass, scarce crystals of euhedral plagioclase, quartz and K-feldspar, opaque minerals, aggregates of fine-grained phyllosilicates and fiammes defining a bedding-parallel foliation generated by welding or diagenetic compaction. Widespread silicified and silica-permineralized plant remains and carbonate mud clasts are found, usually embedded within the ignimbrites. The carbonate sequences are underlain and overlain by volcanic rocks. The carbonate sequence bottoms are mostly gradational, while their tops are usually sharp. The lower part of the carbonate sequences is made up of mud which appear progressively, filling interstices in the top of the underlying volcanic rocks. They gradually become more abundant until they form the whole of the rock fabric. Carbonate on volcanic sandstones and pyroclastic deposits occur, with the nucleation of micritic carbonate and associated production of pyrite. Cyanobacteria, which formed the locus of mineral precipitation, were related with this nucleation. The growth of some of the algal mounds was halted by the progressive accumulation of volcanic ash particles, but in most cases the upper boundary is sharp and suddenly truncated by pyroclastic flows or volcanic avalanches. These pyroclastic flows partially destroyed the carbonate beds and palaeosols. Microbial carbonate clasts, silicified and silica-permineralized tree trunks, log stumps and other plant remains such as small branches and small roots inside pieces of wood (interpreted as fragments of nurse logs) are commonly found embedded within the ignimbrites. The study of the carbonate and volcanic rocks of the San Ignacio Fm allows the authors to propose a facies model that increases our understanding of lacustrine environments that developed in volcanic settings.     

An instrument to observe low-degree solar oscillations

We have constructed an instrument optimized to observe solar oscillations of low degree. The primary goal of this instrument, which we call LOWL, is to measure the frequency splitting of the low-degree modes in order to determine the rotation rate of the solar core. The LOWL is a Doppler imager based on a magneto-optical filter. It employs a two-beam technique to simultaneously observe solar images in opposite wings of the absorption line of potassium at 769.9 nm. This instrument is very stable against drifts in the wavelength zero-point, is insensitive to noise sources due to intensity fluctuations and image motion, and has a Doppler analyzer with no moving parts. The LOWL has been deployed at HAO's observing station on Mauna Loa, Hawaii and will operate for a period of at least two years.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

The decay products of rn in etched track radon detection

Precipitation of decay products of atmospheric ²²²Rn in small containers and the effects of their precipitation on alpha-particle-track-measurements of radon activities were studied. From decay curves of decay product activities on surfaces exposed to radon-containing air the ratios ²¹⁴Pb/²¹⁸Po (=r) in the precipitates were determined. From r average ages of precipitating decay products were calculated. Average ages and r were low, indicating rapid precipitation of decay products, and decreased with container size. Activities on exposed surfaces were approximately those expected if decay products precipitate completely and uniformly on the internal surfaces of containers.Decay products precipitated on foils of correct thickness covering cellulose nitrate (CN) track detectors produce tracks. Therefore track densities produced by given radon activities are increased by such covers to extents predictable from the decay product activities on the overlays. Tracks formed under overlays may etch to larger, more vertical-sided, more easily counted forms. When suspended, uncovered, in air at distances from surfaces greater than the ranges of the alpha particles, three types of CN recorded tracks at the rate (ρ′) of 0.12 tracks cm⁻² (pCi Rn)⁻¹ 1⁻¹ hr⁻¹ as predicted by a theoretical expression. In small containers (ρ′) varied with position and container size.     

Sediment indicators of meromixis: comparison of laminations, diatoms, and sediment chemistry in Brownie Lake, Minneapolis, USA

Meromixis has several powerful effects on lakes, yet there is no single definitive sediment indicator of meromixis. In this study three sediment indicators of meromixis were compared in Brownie Lake, Minneapolis, Minnesota, a small eutrophic lake that became meromictic around 1925. The results show that in Brownie the onset of laminations and changes in the iron to manganese ratio most likely occurred before the development of permanently anoxic bottom water and that changes in the diatom assemblage occurred later, most likely only when meromixis was well developed.This is the 11th in a series of papers published in this special AMQUA issue. These papers were presented at the 1994 meeting of the American Quaternary Association held 19–22 June, 1994, at the University of Minnesota, Minneapolis, Minnesota, USA. Dr Linda C. K. Shane served as guest editor for these papers.     

Polarization Calibration of the Helioseismic and Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO)

As part of the overall ground-based calibration of the Helioseismic and Magnetic Imager (HMI) instrument an extensive set of polarimetric calibrations were performed. This paper describes the polarimetric design of the instrument, the test setup, the polarimetric model, the tests performed, and some results. It is demonstrated that HMI achieves an accuracy of 1% or better on the crosstalks between Q, U, and V and that our model can reproduce the intensities in our calibration sequences to about 0.4%. The amount of depolarization is negligible when the instrument is operated as intended which, combined with the flexibility of the polarimeter design, means that the polarimetric efficiency is excellent.     

Strontium and neodymium isotopic study of the western Mogollon-Datil volcanic region,New Mexico,USA

The Sr- and Nd-isotopic compositions of large mid-Cenozoic caldera-forming eruptions, and related rocks, from the western portion of the Mogollon-Datil volcanic field have been determined. The average initial ⁸⁷Sr/⁸⁶Sr ratios of 27 samples from felsic flows range from 0.70629 to 0.72872; however, all but two flows are 0.71337 or less. Ten analyses of intermediate and mafic rocks showed a tendency towards lower initial ⁸⁷Sr/⁸⁶Sr ranging from 0.70363 to 0.70968. Initial ¹⁴³Nd/¹⁴⁴Nd ratios of II felsic and intermediate rocks range from 0.51216 to 0.51231. Two basalts analyzed for ¹⁴³Nd/¹⁴⁴Nd have ratios of 0.51250 and 0.51291. During the course of the volcanic activity from 34 Ma to the present, there was a shift towards lower initial ⁸⁷Sr/⁸⁶Sr ratios, and lower SiO₂ contents. A number of models of crustal melting, fractionation, mixing, and assimilation and fractional crystallization (AFC), using a variety of possible endmembers, were tested, to see if they could explain the isotopic and geochemical characteristics of the Mogollon-Datil volcanic rocks. The best fit was an AFC model using two components, one a mantle-sourced primary magma, with isotopic ratios of the Kilbourne Hole, N. M., basanite, and the other an upper crust with average continental isotopic ratios, and Sr and Nd abundances similar to the Texas Canyon pluton of Arizona.